サノテック Product Lineup

In the conventional "Entry Management Board," there were concerns about human errors such as omissions and forgetting to erase entries. However, the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "Oxygen Deficiency Hazard Areas" - Welding and cutting work (bulkhead and support installation, panel welding) - Painting and lining work (corrosion-resistant painting) - Cleaning and sludge removal (tank cleaning, residual oil suction) - Corrosion inspection and sound testing (plate thickness and pinhole investigation, confirmation of steel plate corrosion and cracks) - Air tightness testing (leak checks at welds, confirmation of air pressure retention and bubble leaks) - Equipment installation and piping layout (installation of pumps, valves, and piping) - Internal surface polishing and treatment (removal of weld beads and smoothing work), etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, data shared in the cloud, and immediate situation confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription * For details, please refer to the "catalog."

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

In the conventional "Inlet Management Board," concerns were raised about human errors such as omissions and forgetting to erase entries. However, the new DX service "Safety-board" enhances the safety and efficiency of inlet management operations. 1. Main tasks in "Oxygen Deficiency Hazard Areas" - Scale removal (removal of deposits such as calcium inside drums and heat exchangers) - Inspection of corrosion and wear (inspection of steel plates and pipes deteriorated by oxygen and salt) - Interior lining repairs (chemical resistance reinforcement work for tanks exposed to acid and alkaline agents) - Cleaning operations (removal of sludge and sediments) - Leak and vapor point confirmation (water pressure and air pressure tests at seal and weld areas) - Chemical injection and replacement operations (chemical cleaning and passivation treatment) - UT thickness measurement - Inspection of internal piping and tank bottom drains, etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, data shared in the cloud, and immediate situation confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription * For details, please check the "catalog."

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

In the conventional "Entry Management Board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "Oxygen Deficiency Hazard Areas" - Manual Cleaning (cleaning inside the tank) - Clean-in-Place (automated circulation cleaning) - Foreign Object Inspection (detection of black spots, rust, water stains, etc.) - Internal Polishing and Finishing (removal of fine scratches and maintenance of Ra value) - Sterilization (sterilization using hot water, steam, and chemical solutions) - Allergen Changeover Cleaning (cleaning during product changeover) - Gas Replacement - Corrosion Inspection and Lining Repair, etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, data shared in the cloud, and immediate situation confirmation via PC or smartphone ❸ Possible implementation with reduced initial costs through subscription * For details, please check the "catalog."

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

In the conventional "Entry Management Board," concerns were raised about human errors such as omissions and forgetfulness in recording. However, the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "Oxygen Deficiency Hazard Areas" - Manual Cleaning (cleaning inside the tank) - CIP (Clean-In-Place) inspection (inspection of CIP piping) - Visual and illuminance checks (visual confirmation of residues and foreign substances inside the tank) - Sample collection for validation (checking residual cleaning agents using swab solutions, etc.) - Inspection of wear and weld areas (surface inspection in compliance with GMP) - Internal re-polishing and electro-polishing (EP) (removal of fine surface irregularities) - Gas replacement operations (e.g., N2) - Confirmation of foreign substance contamination risks, etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, data shared in the cloud, and immediate situation confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription * For details, please refer to the "catalog."

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

In the conventional "tank management board," concerns were raised about human errors such as omissions and forgetfulness in entries. However, the new DX service "Safety-board" enhances the safety and efficiency of tank management operations. 1. Main tasks in "oxygen-deficient hazardous areas": - Removal of sludge inside the tank (removal of sludge, scale, and waste residues) - Gas venting and ventilation (removal of flammable and toxic gases such as methane) - pH and component measurement (confirmation of the components in the tank liquid) - Sensor inspection and replacement (replacement and adjustment of level meters, concentration meters, and gas detectors) - Inner wall repair and lining (reconstruction to maintain chemical resistance and corrosion resistance) - Maintenance of mixers and pumps (cleaning of stirring blades, repair of motors and seals) - Odor prevention equipment work (cleaning and replacement of activated carbon and chemical spray nozzles) - Cleaning of the tank bottom, etc. 2. Three features of "Safety-board": ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate situation confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription * For details, please check the "catalog."

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

◇ Introduction Background 　　〇 We had been using a product from another company, but when there was a change in the materials used, a problem arose where sludge tended to accumulate. 　　〇 We considered introducing a new separator with a higher sludge recovery capability than the one we were using. ◆ Introduction Effects 　　● The frequency of tank cleaning, which was previously done about once every two months, has decreased to about once every 6 to 12 months after the introduction. 　　● Maintenance time loss and cleaning costs have been reduced to more than one-third based on simple calculations.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

◇ Introduction Background 　　〇 It has maintained satisfactory accuracy without major troubles. 　　〇 We have been able to use it continuously for a long time with peace of mind while renewing the contract, among other things. ◆ Introduction Effects 　　● It can be used continuously while maintaining its precision in tasks that require accuracy. 　　● Fine sludge has been minimized with paper filters, among other things.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

◇ Introduction Background 　　〇 Due to severe issues caused by aging deterioration and clogging, a switch was considered 　　〇 Achieving maintenance-free operation had become a challenge, among other reasons ◆ Implementation Effects 　　● Achieved maintenance-free operation 　　● Cleaning tasks during long holidays for the line could be omitted 　　● Significantly reduced both working time and costs, among other benefits

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

◇ Introduction Background 　　〇 Originally used a coolant system from another company 　　〇 Decided to introduce FINEMAG, which had already gained recognition for its quality within the company, among other reasons ◆ Introduction Effects 　　● The amount of sludge collected initially was astonishingly large, something I had never seen before 　　● The durability of the rollers is excellent, allowing for long-term use 　　● The performance of the filtration is outstanding, among other benefits

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

◇ Introduction Background 　　〇 Before implementation, we struggled with a situation where a lot of moisture and oil remained in the iron powder generated during manufacturing. 　　〇 After about six months of testing, we decided to implement it due to its unexpectedly significant effects, among other reasons. ◆ Implementation Effects 　　● Even when using difficult-to-remove oil-based coolants, sludge was effectively recovered. 　　● Operational costs were also significantly reduced compared to our initial expectations, among other benefits.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

◇ Introduction Background 　　〇 Initially, a magnet separator made of ferrite magnets was used 　　〇 Maintenance burdens such as regular tank cleaning and liquid replacement due to coolant degradation were concerning ◆ Introduction Effects 　　● The recovery rate has increased to three times compared to the conventional machine 　　● Materials like carbon, which could not originally be recovered, are now captured in the magnetic sludge 　　● Thanks to the higher recovery rate, the cleaning frequency has decreased to one-third of what it was before

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

◇ Introduction Background 　　○ Activities themed around creating a dry floor and a clean factory & achieving zero wastewater 　　○ Realized zero liquid exchange operation for 7 years, etc. ◆ Introduction Effects 　　● Effect of optimizing the arrangement of magnets to recover abrasive particles along with magnetic sludge 　　● Very well dewatered, with moisture content below 30%, etc.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

◇ Introduction Background 　　○ We were using magnetic separators from other companies, but all of them wore out the magnetic drum and rubber in less than a year. 　　○ There is no wear on the rollers, etc. ◆ Implementation Effects 　　● Eliminated tank deposits and reduced impurities below the specified value by removing abrasives with Fineclon. 　　● Sold sludge as valuable material to scrap dealers, etc.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas" - Cleaning and sludge removal work (removing sludge and foreign objects accumulated at the bottom of the tank) - Inspection and testing work (checking for corrosion, leaks, cracks, and abnormal temperatures inside the tank) - Repair and lining (repairing deteriorated areas, applying coatings to improve chemical resistance) - Installation and updating of piping and equipment (installation or replacement of pumps, sensors, and drainage pipes) - Water drainage and wastewater treatment (draining water before work and transporting wastewater) - Gas detection and ventilation work (detecting hazardous gases and performing ventilation) 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without a LAN environment by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate status confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription *Please download the "catalog" to check the details.

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas" - Cleaning and sludge removal work (removing sludge and foreign objects accumulated at the bottom of the tank) - Inspection and testing work (checking for corrosion, leaks, cracks, and abnormal temperatures inside the tank) - Repair and lining (repairing deteriorated areas, applying coatings to improve chemical resistance, etc.) - Installation and updating of piping and equipment (installation or replacement of pumps, sensors, drainage pipes, etc.) - Water drainage and wastewater treatment (draining water before work and transporting wastewater, etc.) - Gas detection and ventilation work (detecting hazardous gases and performing ventilation work, etc.) 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without a LAN environment by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate situation confirmation via PC or smartphone ❸ Possible implementation with reduced initial costs through subscription *Please download the "catalog" to check the details.

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" will enhance the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas" - Cleaning and sludge removal work (tasks such as removing sludge and foreign objects accumulated at the bottom of the tank) - Inspection and testing work (checking for corrosion, leaks, cracks, and abnormal temperatures inside the tank) - Repair and lining (repairing deteriorated areas, applying coatings to improve chemical resistance, etc.) - Installation and updating of piping and equipment (installation or replacement of pumps, sensors, drainage pipes, etc.) - Water drainage and wastewater treatment (draining water before work and transporting wastewater, etc.) - Gas detection and ventilation work (detecting hazardous gases and performing ventilation work, etc.) 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without a LAN environment by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate confirmation of the situation via PC or smartphone ❸ Introduction with reduced initial costs through subscription *Please download the "catalog" to check the details.

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas" - Sludge removal (collection and transportation of settled sewage and sludge) - Inspections and visual checks (confirmation of cracks, corrosion, and leaks) - Repair work (concrete repairs, waterproofing layer reinstallation) - Instrumentation maintenance (replacement and cleaning of flow meters, level gauges, etc.) - Coating (application of chemical-resistant lining (FRP, epoxy resin)) - Odor control equipment work (updating activated carbon and chemical spray equipment) - Maintenance of mixers and aerators (replacement of underwater motors and mixing blades), etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without a LAN environment by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate situation confirmation via PC or smartphone ❸ Possible implementation with reduced initial costs through subscription *Please download the "catalog" to check the details.

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

◇ Introduction Background 　　〇 Due to severe issues caused by aging deterioration and clogging, a switch was considered 　　〇 Achieving maintenance-free operation had become a challenge, among other reasons ◆ Implementation Effects 　　● Achieved maintenance-free operation 　　● Cleaning tasks during long holidays for the line could be omitted 　　● Significant reductions in both work time and costs were achieved, among other benefits

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

Collected a large amount of sludge and satisfied with the high dewatering performance. ◇ Introduction Background 　　〇 Originally used a coolant system from another company 　　〇 Decided to introduce FINEMAG, which had already gained recognition for its quality within the company, among other reasons ◆ Introduction Effects 　　● The amount of sludge collected initially was astonishingly large, something I had never seen before 　　● The durability of the rollers is excellent, allowing for long-term use 　　● The dewatering performance is outstanding, among other points

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

Exceeding expectations in effectiveness. Considering implementation across all factories. ◇ Background of Implementation 　　〇 Before implementation, we struggled with a situation where a lot of moisture and oil remained in the iron powder generated during manufacturing. 　　〇 After about six months of testing, we decided to implement it due to the results exceeding our expectations. ◆ Effects of Implementation 　　● Even when using difficult-to-remove oil-based coolants, sludge is collected effectively. 　　● Operating costs were significantly lower than anticipated.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

The burden of troublesome maintenance tasks has been significantly reduced, and we are also contributing to ECO. ◇ Introduction Background 　　〇 Initially, we were using a magnet separator made of ferrite magnets. 　　〇 At that time, we were struggling with the maintenance burden of regular tank cleaning and liquid replacement due to the degradation of coolant. ◆ Implementation Effects 　　● The recovery rate has increased to three times compared to conventional machines. 　　● Materials like carbon, which could not originally be recovered, are now captured in magnetic sludge and recovered. 　　● Thanks to the higher recovery rate, the frequency of cleaning has decreased to one-third of what it was before.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

Combining with our fine magnet coolant purification system reduces the burden on machines and improves the yield rate. ◇ Introduction Background 　　○ Activities themed on creating dry floors, building clean factories, and achieving zero waste liquid 　　○ Realized zero liquid replacement operation for 7 years, etc. ◆ Introduction Effects 　　● Effect of optimizing the arrangement of magnets to recover abrasive particles along with magnetic sludge 　　● Very well filtered, with a moisture content below 30%, etc.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

Maintains initial performance, resistant to breakage without friction. Sells grinding sludge as a valuable material to scrap dealers. ◇ Introduction Background 　　○ Used magnetic separators from other companies, but all wore out the magnetic drum and rubber in less than a year. 　　○ No wear on rollers, etc. ◆ Introduction Effects 　　● Eliminated tank deposits and reduced impurities below specified levels by removing abrasive particles with Fine Clon. 　　● Sold sludge as a valuable material to scrap dealers, etc.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

The fully automatic gas detection monitoring system "SMART-Gasken" allows for gas detection 24/7 without the need for a LAN environment! (Main Features) ◎ Lightweight and excellent portability (easy to carry and install) ◎ Linked with a stationary gas detection unit ◎ Constantly connected to the cloud via a built-in SIM (gas concentration is continuously uploaded) ◎ Equipped with an LCD screen (monitoring panel) for checking detection status and various settings including alarms, etc. For monitoring at the centralized monitoring center, free BI tools such as "Google Data Portal" and "Microsoft Power BI Desktop" are also available. Additionally, monitoring can be done via smartphones or tablets, allowing for information sharing with relevant parties. In case of an alarm, "alarm notifications" can also be sent to pre-registered email addresses. ★ This serves as a powerful tool to curb the rising costs of labor and the increasing expenses of equipment inspections.

• Personal authentication
• Other measurement, recording and measuring instruments
• Entrance and exit control system

The fully automatic gas detection monitoring system "SMART-Gasken" allows for gas detection 24/7 without the need for a LAN environment! (Main Features) ◎ Lightweight and excellent portability (easy to carry and install) ◎ Linked with a stationary gas detection unit ◎ Always connected to the cloud via built-in SIM (constantly uploads gas concentration) ◎ Equipped with an LCD screen (monitoring panel) for checking detection status and various settings including alarms, etc. For centralized monitoring at the monitoring center, free BI tools such as "Google Data Portal" and "Microsoft Power BI Desktop" can also be utilized. Additionally, monitoring is possible via smartphones and tablets, allowing for information sharing with relevant parties. In the event of an alarm, "alarm notifications" can be sent to pre-registered email addresses. ★ This serves as a powerful tool to curb the rising costs of labor and the increasing expenses of equipment inspections.

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

The fully automatic gas detection monitoring system 'SMART-Gasken' enables gas detection 24/7 without the need for a LAN environment! (Main Features) ◎ Lightweight and excellent portability (easy to carry and install) ◎ Linked with a stationary gas detection unit ◎ Always connected to the cloud via a built-in SIM (constantly uploads gas concentration) ◎ Equipped with an LCD screen (monitoring panel) for checking detection status and various settings including alarms, etc. For monitoring at the centralized monitoring center, free BI tools such as "Google Data Portal" and "Microsoft Power BI Desktop" are also available. Additionally, monitoring is possible via smartphones and tablets, allowing information sharing with relevant parties. In case of an alarm, "alarm notifications" can be sent to pre-registered email addresses. ★ This serves as a powerful tool to curb the rising costs of labor and the increasing expenses of equipment inspections.

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

The fully automatic gas detection monitoring system "SMART-Gasken" allows for gas detection 24/7 without the need for a LAN environment! (Main Features) ◎ Lightweight and excellent portability (easy to carry and install) ◎ Linked with a stationary gas detection unit ◎ Always connected to the cloud via built-in SIM (constantly uploads gas concentration) ◎ Equipped with an LCD screen (monitoring panel) for checking detection status and various settings including alarms, etc. For monitoring at the centralized monitoring center, free BI tools such as "Google Data Portal" and "Microsoft Power BI Desktop" are also available. Additionally, monitoring is possible via smartphones and tablets, allowing information sharing with relevant parties. In case of an alarm, "alarm notifications" can be sent to pre-registered email addresses. ★ This serves as a powerful tool to curb the rising costs of labor and the increasing expenses of equipment inspections.

• Other security and surveillance systems
• Other measurement, recording and measuring instruments
• Entrance and exit control system

There are many successful adoptions in the manufacturing, sales, logistics, and service industries. ◇ Eliminates static electricity that accumulates inside air conditioners to achieve energy savings. ◇ Easy installation without the need for construction. ◇ No monthly maintenance costs, and the effects last semi-permanently.

• Other anti-static devices

There are many successful adoptions in the manufacturing, sales, logistics, and service industries. ◇ Eliminates static electricity that accumulates inside air conditioners to achieve energy savings. ◇ Easy installation without the need for construction. ◇ No monthly maintenance costs, and the effects last semi-permanently.

• Other anti-static devices

There are many successful adoptions in the manufacturing, sales, logistics, and service industries. ◇ Eliminates static electricity that accumulates inside air conditioners to achieve energy savings. ◇ Easy installation without the need for construction. ◇ No monthly maintenance costs, and the effects last semi-permanently.

• Other anti-static devices

There are many successful adoptions in the manufacturing, sales, logistics, and service industries. ◇ Eliminates static electricity that accumulates inside air conditioners to achieve energy savings. ◇ Easy installation without the need for construction. ◇ No monthly maintenance costs, and the effects last semi-permanently.

• Other air conditioning equipment
• Other anti-static devices

Hiring at major restaurant chains!! There are many hiring achievements in the manufacturing, sales, logistics, and service industries as well. ◇ Eliminates static electricity that accumulates inside air conditioners to achieve energy savings ◇ Easy installation without the need for construction ◇ No monthly maintenance costs, and the effects last semi-permanently

• air conditioning
• Other anti-static devices

The "Lamp Tag (STOC Tag)" is equipped with a built-in wireless module and is linked to the inventory management system. The tag itself emits light in three colors, indicating the location of the relevant materials during shipping and other times, helping to eliminate the significant waste of time spent searching. Additionally, the "Lamp Tag" comes with a magnet, making it easy to install on shelves. If you are interested, please feel free to contact us.

• 2D Code Reader
• Handheld barcode reader
• Production Management System

The "Lamp Tag (STOC Tag)" is equipped with a built-in wireless module and is linked to the inventory management system. The tag itself emits light in three colors, indicating the location of the relevant materials during processes such as shipping, thus significantly reducing the time wasted searching for items. Additionally, the "Lamp Tag" comes with a magnet, making it easy to install on shelves. If you are interested, please feel free to contact us.

• 2D Code Reader
• Production Management System
• Handheld barcode reader

The "Lamp Tag (STOC Tag)" is equipped with a built-in wireless module and works in conjunction with inventory management systems. The tag itself emits light in three colors, indicating where the relevant materials are located during processes such as shipping, thus significantly reducing the time wasted searching for items. Additionally, the "Lamp Tag" comes with a magnet, making it easy to install on shelves. If you are interested, please feel free to contact us.

• 2D Code Reader
• Production Management System
• Handheld barcode reader

◆ Do you have any of these concerns? ▲ "It takes too much time to manage the data for budget vs. actual!" ▲ "We can't visualize work progress!" ▲ "Daily reports are still handwritten, and it takes time to compile them!" ◇ This can be resolved by digitizing "work progress and daily reports." 1. Systematize "work progress management" 2. Digitize and manage "start and completion times" 3. Digitize "daily reports," etc. * We offer support for the "digitization/systematization" of various "handwritten forms."

• Handheld barcode reader
• Production Management System
• Process Control System

◆ Do you have any of these concerns? ▲ "I can't read handwritten text!" ▲ "Everyone writes differently!" ▲ "I have to work overtime again to compile the data!" ◇ You can solve these issues by digitizing "work reports." 1. Achieve the digitization of "work reports." 2. Flexibly change "work items." 3. Easily expand and utilize in "Excel." * We provide support for the "data conversion/systematization" of various "handwritten forms."

• Handheld barcode reader
• Production Management System
• Process Control System

◆ Do you have any of these concerns? ▲ "I can't read handwritten text!" ▲ "Everyone writes differently!" ▲ "I have to work overtime again to compile the data!" ◇ These issues can be resolved by digitizing "work reports." 1. Achieve digitization of "work reports." 2. Flexibly change "work items." 3. Easily expand and utilize in "Excel." * We would be grateful if you could consult us regarding the "digitization/systematization of various handwritten forms."

• Handheld barcode reader
• Production Management System
• Process Control System

1. Overview A new technology utilizing a permanent magnet drum-type magnetic separator for the removal of "arsenic" contained in contaminated sludge generated from construction work. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, allowing for the safe utilization of treated sludge. 2. Target Industries General contractors, industrial waste treatment companies, and other soil purification-related businesses, etc. 3. Target Issues ▲ Contaminated sludge and soil require appropriate disposal. ▲ Cost concerns and pressure on managed disposal sites, etc. 4. Results After Implementation ◎ Arsenic levels below environmental standards; iron powder recovery (over 98%). ◎ Treated sludge can be safely utilized, etc. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment rental is available upon arrangement.

• Separation device
• High-power magnetic separator, magnetic filter
• Filtration Equipment

1. Overview In the manufacturing process of multilayer ceramic capacitors, reduce the ceramic accumulation in the piping that occurs during the post-processing of laminated scraps and cuttings. - Approximately 30% of non-magnetic ceramics are recovered along with magnetic materials. - The concentration of non-magnetic materials in the liquid decreases, reducing the frequency of piping blockages and sedimentation tank cleaning. 2. Target Industries - Manufacturers of multilayer ceramic capacitors, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic accumulates in the piping in a short period, causing blockages. ▲ Significant costs arise for cleaning the piping and sedimentation tanks, etc. 4. Results After Implementation ◎ Repair costs for cleaning the piping and replacing pipes, which amounted to several million yen annually, have been reduced. ☆ Please download the "catalog" to check the specifications. ★ The loan of an "evaluation unit" is also adjustable.

• Separation device
• High-power magnetic separator, magnetic filter
• Filtration Equipment

1. Overview Since the target atomized metal fine powder is a magnetic material, a recovery method using magnets is being considered. - Achieved a recovery rate close to the target value using a permanent magnet drum-type magnetic separator. - Utilized a permanent magnet drum-type magnetic separator as a secondary recovery device for the cyclone separator. 2. Target Industry Metal fine powder manufacturing industry, and others (industries related to metal fine powders), etc. 3. Target Issues ▲ In the water atomization method, after recovering mixed particles in the liquid using a cyclone separator, wastewater treatment becomes necessary. ▲ With the expected expansion of demand for smartphones, IoT, electric vehicles, etc., improving the recovery yield of metal fine powders is becoming increasingly important, etc. 4. Results After Implementation ◎ By using a permanent magnet drum-type magnetic separator, it has become possible to recover 98% of the residuals from wastewater that was previously treated as waste. ◎ Since it can significantly reduce the amount of metal fine powder residue in the wastewater, cost reduction effects for wastewater treatment are expected. ☆ Please download the "catalog" to check the specifications. ★ The loan of an "evaluation machine" can be arranged.

• Separation device
• High-power magnetic separator, magnetic filter
• Filtration Equipment

Hiring at major restaurant chains!! There are many hiring achievements in the manufacturing, sales, logistics, and service industries as well. ◇ Eliminates static electricity that accumulates inside air conditioners to achieve energy savings ◇ Easy installation without the need for construction ◇ No monthly maintenance costs, and the effects last semi-permanently

• Organic Natural Materials
• air conditioning
• Other anti-static devices

1. Overview Continuous concentration of magnetic paste such as nickel and ferrite to achieve an appropriate moisture content. - Recovery of magnetic materials using a rotating powerful magnetic drum. - Achieving the appropriate moisture content by adjusting the rotation speed and the pressure of the squeezing rollers. 2. Target Industries Manufacturers of electronic components and magnetic fine powders, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ As the fine powder of magnetic materials becomes smaller, the filtration time using filters increases. ▲ It is difficult to secure the optimal moisture content for handling paste and shortening the drying process, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional batch processing with filters has been significantly reduced. ◎ Breakthrough of the limits of filter processing when advancing fine powder production due to high performance. ☆ Please download the "catalog" to check the specifications. ★ "Evaluation units" are available for loan upon arrangement.

• Separation device
• High-power magnetic separator, magnetic filter
• Filtration Equipment

1. Features ◆ "Dehydration mechanism" + "Automatic discharge mechanism" + "Continuous magnetic separation processing" (Increases production efficiency without stopping the manufacturing line!) 2. Functions ◆ Liquid separation ◆ Magnetic/non-magnetic material separation ◆ Moisture content adjustment (concentration control) ◆ Removal of magnetic foreign substances 3. Benefits ◆ Improved production efficiency for the next process through dehydration/moisture content adjustment of recovered materials ◆ No filters or consumables required ◆ Achieves high magnetic force of 0.9 Tesla (excluding some large models) over a wide area of the magnet drum surface with permanent magnets, capturing difficult magnetic materials in the liquid ◆ Continuous magnetic separation processing without stopping the manufacturing process due to the automatic discharge mechanism for magnetic materials adsorbed on the magnet drum

• Separation device
• High-power magnetic separator, magnetic filter
• Filtration Equipment

◆ About the Systematization of "Location Management" (Overview) 1. About "Location Management" - Overview: Managing the "storage area" by placing specified items (designated goods) in specified locations (designated positions) in specified quantities (designated amounts). - Benefits: ◎ "Necessary items for production" can be retrieved immediately (information is shared). ◎ Inventory information for "necessary items for production" can be quickly understood, etc. 2. Key Points of "Systematization" - Three key points (QR / terminals / data management), etc. 3. Image of "Systematization" Operation - System configuration image, etc. ★ For more details, please check the "catalog." * "QR Code" is a registered trademark of Denso Wave Inc.

• Production Management System
• Handheld barcode reader
• 2D Code Reader