ケーエヌエフ・ジャパン List of Products and Services

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Well-balanced pressure reduction and pressurization characteristics - Variable flow rate (brushless motor) *Optional Basic flow rate: 7 l/min Achievable vacuum level: 220 mbar abs Maximum allowable discharge pressure: 2.2 bar

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Well-balanced pressure reduction and pressurization characteristics - Variable flow rate (brushless motor) *Optional Basic flow rate: 5 l/min~ Achievable vacuum level: 230 mbar abs Maximum allowable discharge pressure: 3 bar (0.3 MPa)

- Customization is possible according to technical challenges. - Maintenance-free, contamination-free - High pump performance despite compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) *Optional - No restrictions on installation direction Basic flow rate: 2.5 l/min Achievable vacuum level: 250 mbar abs Maximum allowable discharge pressure: 1.4 bar

- Customization is possible according to technical challenges. - Maintenance-free, contamination-free - High pump performance with a compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) *Optional - No restrictions on installation direction Basic flow rate: 4.2 l/min Achievable vacuum level: 230 mbar abs Maximum allowable discharge pressure: 2.5 bar

- It can be used for the transfer of wet gases and condensate gases. - It can be restarted from a reduced pressure or positive pressure state without releasing to the atmosphere. - The brushless DC motor allows for flow rate adjustment via PWM control. - It can be used at ambient temperatures up to 50°C and gas temperatures up to 70°C. - Leak-tight design: 6 x 10^-3 mbar x l/s - A multi-voltage compatible AC converter specification is also available. Basic flow rate: 7 l/min and above Achievable vacuum level: < 100 mbar abs and above Maximum allowable discharge pressure: 2.5 bar (0.25 MPa)

In a decarbonized society and the development of new energy, there are many technical challenges that conventional gas pumps cannot address. We believe that the KNF process pump, with its features listed below, can assist in solving your technical challenges. Main features of the KNF process pump: - Contamination-free - A wide range of gas contact materials - Pressure-specific design with a maximum allowable discharge pressure of 1.2 MPa - Vacuum-specific design - Leak-tight design - Long lifespan design - Explosion-proof specifications (optional IECEx / ATEX) - Heat-resistant specifications with gas temperatures up to 240°C (optional) - Weather-resistant coating (optional)

- Self-sustaining type - Abundant contact materials - Integrated pressure regulating valve (optional) - Excellent suction characteristics Basic flow rate: 300 ml/min Suction lift: 6 mWg (KP) / 5 mWg (KT) Discharge lift: 10 mWg

- Heat-resistant diaphragm gas pump (maximum 240°C) - High corrosion resistance - Compact design - Optional change to DC brushless motor N012AT.16E / N012ST.16E: Heat-resistant type without temperature control function N012ST.11E: Heat-resistant type with temperature control function Basic flow rate: 10.5 l/min Achievable vacuum level: 240 mbar abs Maximum allowable discharge pressure: 1.5 bar (0.15 MPa)

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Change to FDA-certified materials (optional) - Well-balanced pressure reduction and pressurization characteristics - Serial connection double head <50 mbar abs (optional) - Increased flow rate with double head type - Improved vacuum level with double head type (optional) Basic flow rate: 3.9 - 4.5 l/min (varies by material and motor) Achievable vacuum level: 230 - 300 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 2.1 - 2.5 bar (varies by material and motor)

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Change to FDA-certified materials (optional) - Well-balanced pressure reduction and pressurization characteristics - Serial connection double head <50 mbar abs (optional) - Increased flow rate with double head type - Increased vacuum level with double head type (optional) Basic flow rate: 5 l/min~ Achievable vacuum level: 230 mbar abs Maximum allowable discharge pressure: 3 bar (0.3 MPa)

- Customization according to technical challenges is possible. - Maintenance-free, contamination-free. - High corrosion resistance due to a wide variety of gas contact materials. - High pump performance despite a compact design. - Long lifespan design, high durability. - Variable flow rate (brushless motor). - No restrictions on installation direction. Basic flow rate: Single head 3.5 - 4.5 l/min (varies by material and motor) Double head 6.0 - 8.0 l/min (varies by material and motor) Achievable vacuum level: 230 - 300 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 2.1 - 2.5 bar (varies by material and motor)

- Customization according to technical challenges is possible. - Maintenance-free, contamination-free - High corrosion resistance due to a wide variety of gas contact materials - High pump performance despite compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) - No restrictions on installation direction Basic flow rate: Single head 2.1 - 3.1 l/min (varies by material and motor) Achievable vacuum level: 250 - 350 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 1.0 - 1.4 bar (varies by material and motor)

- It can be used for the transfer of wet gas and condensate gas. - It can be restarted from a reduced pressure state or a positive pressure state without releasing to the atmosphere. - The brushless DC motor allows for flow rate adjustment via PWM control. - It can be used at ambient temperatures up to 50°C and gas temperatures up to 70°C. - Leak-tight design: 6 x 10^-3 mbar x l/s - A multi-voltage compatible AC converter specification is also available. Basic flow rate: 7 l/min and above Achievable vacuum level: < 100 mbar abs and above Maximum allowable discharge pressure: 2.5 bar (0.25 MPa)

The maintenance procedures for other gas pumps are generally similar, so please refer to them.

The maintenance procedures for other gas pumps are generally similar, so please refer to them.

- Can be used for the transport of wet gases and condensate gases. - Can be restarted from a reduced pressure state or a positive pressure state (brushless DC motor). - The brushless DC motor allows for flow adjustment via PWM control. Basic flow rate: 4.2 - 5 l/min ~ Achievable vacuum level: < 30 mbar abs ~ Maximum allowable discharge pressure: 0.1 - 0.3 bar (0.01 - 0.03 MPa)

It can be used for sampling and monitoring high-temperature gases such as flue gas sampling from factories, various process monitoring, and engine exhaust measurement.

- Process pump - Corrosion-resistant specification Basic flow rate: 33 l/min to 39 l/min (varies depending on diaphragm material) Achievable vacuum level: < 100 mbar abs Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available for Japanese voltage AC single-phase 100V 50/60Hz.

- Process pump - Corrosion-resistant specification Basic flow rate: 31 l/min to 39 l/min (varies depending on diaphragm material) Maximum allowable discharge pressure: 2 bar (0.2 MPa) Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available in Japanese voltage AC single-phase 100V 50/60Hz.

- Process pump - Corrosion-resistant specification Basic flow rate: 18 l/min to 22 l/min (varies depending on diaphragm material) Achievable vacuum level: < 20 mbar abs Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available for Japanese voltage AC single phase 100V 50/60Hz.

- Brushless DC motor - High pumping speed across all areas of positive and negative pressure - Robust and compact - Analog or digital speed control - Pump parameters can be read - Safety features N 938 AN.29 DC-B Basic flow rate: 9 - 35 l/min Achievable vacuum level: < 160 mbar abs Maximum allowable discharge pressure: 1.0 bar (0.1 MPa) N 938.1.2 AN.29 DC-B Basic flow rate: 13 - 53 l/min Achievable vacuum level: < 140 mbar abs Maximum allowable discharge pressure: 1.0 bar (0.1 MPa)

- Can be used for the transport of wet gases and condensate gases. - Can be restarted from a reduced pressure state or a positive pressure state (brushless DC motor). - The brushless DC motor allows for flow rate adjustment via PWM control. Basic flow rate: 5.5 - 6.5 l/min ~ Achievable vacuum level: 100 - 160 mbar abs ~ Maximum allowable discharge pressure: 2.4 - 2.5 bar (0.24 - 0.25 MPa)

N86.0 KNDC Basic flow rate: 6 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KTDC Basic flow rate: 5.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KNDC-B Basic flow rate: 5 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KN.29DC-B Basic flow rate: 3.8 - 5 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KTDC-B Basic flow rate: 4.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KT.29DC-B Basic flow rate: 2.8 - 4.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar

- Process pump - Corrosion-resistant specification Basic flow rate: 27 l/min to 30 l/min (varies depending on diaphragm material) Maximum allowable discharge pressure: 2 - 4 bar (0.2 - 0.4 MPa) Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available in Japanese voltage AC single-phase 100V 50/60Hz.