ケーエヌエフ・ジャパン List of Products and Services

- Maximum allowable discharge pressure 12 bar (1.2 MPa) - Basic flow rate 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification SUS / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10^-3 mbar x l/s

- Maximum allowable discharge pressure: 12 bar (1.2 MPa) - Leak-tight design - Abundant gas contact materials: EPDM / PTFE - Gas transfer for hydrogen, carbon dioxide, helium, etc. Basic flow rate: 130 l/min ± 10% (EPDM diaphragm) 120 l/min ± 10% (PTFE diaphragm) Achievable vacuum level: 100 mbar abs Maximum allowable discharge pressure: 12 bar (1.2 MPa)

Main Content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transferring rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications) - Stationary gas pumps - Portable gas pumps

Mainly content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transfer of rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications)

- Basic flow rate 7.5 l/min - Achievable vacuum level 140 mbar abs - Maximum allowable discharge pressure 1.5 bar (0.15 MPa) - Corrosion-resistant specification PVDF / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

- Basic flow rate N922 8L: 7.5 l/min / N922 16L: 16 l/min - Achievable vacuum level 200-350 mbar abs - Maximum allowable discharge pressure 1.5 bar (0.15 MPa) - Corrosion-resistant specification PTFE - Robust design that withstands tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

- Explosion-proof structure electrical machinery and equipment type certification passed - Increased safety explosion-proof structure, pressure-resistant explosion-proof structure - Motor division grade: Ex II 2G Ex h IIB+H2 T4 Gb

IECEx / ATEX compliant explosion-proof diaphragm gas pump

It can be used for sampling and monitoring high-temperature gases such as flue gas sampling from factories, various process monitoring, and engine exhaust measurement.

- Process pump - Corrosion-resistant specification Basic flow rate: 18 l/min to 22 l/min (varies depending on diaphragm material) Achievable vacuum level: < 20 mbar abs Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available for Japanese voltage AC single phase 100V 50/60Hz.

- Maximum allowable discharge pressure 12 bar (1.2 MPa) - Basic flow rate 110 l/min (50Hz) to 140 l/min (60Hz) - Corrosion-resistant specification SUS / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

- Maximum allowable discharge pressure: 7 bar (0.7 MPa) *The double diaphragm .12 specification is 3 bar - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specification: .9 specification: 6 x 10-3 mbar x l/s .13 specification / .12 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used up to a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Maximum allowable discharge pressure: 7 bar (0.7 MPa) - Basic flow rate: 58 l/min (50Hz) / 68 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10^-3 mbar x l/s, .13 specification / .12 specification: 6 x 10^-5 mbar x l/s - By using water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Maximum allowable discharge pressure: 0.5 bar (0.05 MPa) - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10-3 mbar x l/s, .13 specification / .12 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Maximum allowable discharge pressure: 12 bar (1.2 MPa) - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10-3 mbar x l/s, .13 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.