ケーエヌエフ・ジャパン List of Products and Services

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. It features a high discharge specification. - FP1.7 Series / FP1.25 Series We have integrated the pulsation reduction damper with the pump. Two types are available: brushed DC motors and brushless DC motors. The brushless DC motor also allows for digital customization. We will be exhibiting at JASIS 2025, one of Asia's largest cutting-edge science and analysis systems & solutions exhibitions, where manufacturers of analytical and scientific instruments gather. Please visit our booth. We look forward to seeing you there. ■ Exhibition Name: JASIS 2025 ■ Date: September 3 (Wed) - 5 (Fri), 2025 (3 days) ■ Venue: Makuhari Messe International Exhibition Hall and Conference Center ■ Participation Fee: Free (Pre-registration required) ■ Booth Number: 6B-703

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted materials Basic flow rate: 60 ml/min (TT type 40 ml/min) Flow rate variable range: 5 - 40 ml/min Suction lift: 3 mWg Discharge lift: 60 mWg

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted materials - It is possible to increase flow rate by parallel connection. - Two flow paths can be supplied with one motor. Basic flow rate: 40 ml/min x 2 Flow rate variable range: 5 - 40 ml/min x 2 Suction lift: 3 mWg Discharge lift: 10 mWg

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted materials Basic flow rate: 140 ml/min Suction lift: 3 mWg Discharge lift: 60 mWg

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. - FP7 Series / FP25 Series The pulsation reduction damper has been integrated with the pump. Two types are available: brushed DC motors and brushless DC motors. Digital customization is also possible with the brushless DC motor.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Well-balanced pressure reduction and pressurization characteristics - Variable flow rate (brushless motor) *optional NMP820.1.2 KPDC-B or NMP820.1.2KPDC-B4 Basic flow rate: 3.5 l/min Achievable vacuum level: 330 mbar abs Maximum allowable discharge pressure: 1.2 bar (0.12 MPa) NMP830.3KPDC-B or NMP820.3KPDC-B4 Basic flow rate: 1.7 l/min Achievable vacuum level: 100 mbar abs Maximum allowable discharge pressure: None specified (do not use for pressurization) Please refer to the data sheet for details.

Introduction to the FP400 series mechanism *The FP150 series has the same mechanism.

Inkjet Printer Applications - Liquid Pumps - Vacuum Pumps - Compressors - Micro Pumps - Pulsation Dampers - Pressure Regulating Valves, etc. We offer a wide range of wetted components tailored to various ink compositions. Please feel free to contact us regarding any technical challenges related to pump technology for inkjet printers.

Maintenance can be performed by the users themselves using general-purpose tools.

- High discharge design, maximum allowable discharge pressure 0.6 MPa - Reduced pulsation in liquid delivery - Long lifespan design - Excellent linearity - Self-sustaining - Transfer of sensitive liquids - Abundant wetted materials Significantly reduces pulsation using five diaphragms, controls flow rate with an external signal to a brushless DC motor, and demonstrates a linear flow curve based on the control signal. It offers extensive customization for users' technical challenges and various optional parts are available.

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted materials - It is possible to increase flow rate by parallel connection. - Two flow paths can be supplied with one motor. Basic flow rate: 600 ml/min x 2 Suction lift: 3 mWg Discharge lift: 10 mWg

- Self-sufficient - Abundant contact materials - Integrated pressure regulating valve (optional) - Excellent suction characteristics - It is possible to increase the flow rate by connecting in parallel. - Can be used with two flow paths with one motor. Basic flow rate: 300 ml/min x 2 Suction lift: 6 mWg (KP) / 5 mWg (KT) Discharge lift: 10 mWg

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted material options - NSF certified components can be selected optionally. Basic flow rate: 1300 ml/min x 2 Suction lift: 3 mWg Discharge lift: 10 mWg

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted material options - An integrated pressure regulating valve is also available as an option. - NSF-certified materials can be selected as an option. Basic flow rate: 1300 ml/min Suction lift: 3 mWg Discharge lift: 60 mWg

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted material options - An integrated pressure regulating valve is also available as an option. - NSF-certified materials can be selected as an option. Basic flow rate: 1200 ml/min Suction lift: 3 mWg Discharge lift: 10 mWg

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted materials Basic flow rate: 600 ml/min Suction lift: 3 mWg Discharge lift: 10 mWg

- Self-sufficient - Click-on type mount plate - Maintenance-free, contamination-free - Abundant wetted materials Basic flow rate: 150 ml/min (KP) / 130 ml/min (KT) Suction lift: 3 mWg (KP) / 2 mWg (KT) Discharge lift: 10 mWg

- Customization according to technical challenges is possible. - Maintenance-free, contamination-free - High corrosion resistance due to a wide variety of gas contact materials - High pump performance despite compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) - No restrictions on installation direction Basic flow rate: Single head 2.1 - 3.1 l/min (varies by material and motor) Achievable vacuum level: 250 - 350 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 1.0 - 1.4 bar (varies by material and motor)

High discharge liquid pump with a maximum allowable discharge pressure of 0.6 MPa (60 mWg) It can be used for liquid transfer in high pressure loss resistance flow paths, high-pressure cleaning, and mist generation through nozzles or orifices. - Flow rate adjustment is possible with brushless motor control. - Self-priming - Abundant wetted material options (EPDM / PTFE) - Maintenance-free, contamination-free Basic flow rate: 650 ml/min Maximum allowable discharge pressure: 0.6 MPa (6 bar / 6 mWg) Suction lift: 3 mWg

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted materials - An integrated pressure regulating valve is also available as an option. - NSF certified materials can be selected as an option. Basic flow rate: 3000 ml/min Suction lift: 3 mWg Discharge lift: 10 mWg

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted material options - An integrated pressure adjustment valve is also available as an option. - NSF-certified materials can be selected as an option. Basic flow rate: 3000 ml/min Suction lift: 3 mWg Discharge lift: 60 mWg

- Pulsation-reducing liquid pump with new design - Variable flow control with brushless motor - Abundant wetted material options - Self-priming - NSF certified materials (optional) - AC motor specification (optional) Basic flow rate: 12.4 l/min (KP) / 11.5 l/min (KT) Suction lift: 4.5 mWg Discharge lift: 10 mWg

- Pulsation-reducing liquid pump with new design - Variable flow control with brushless motor - Abundant wetted materials - Self-sustaining - NSF certified materials (optional) - AC motor specification (optional) Basic flow rate: 12.4 l/min (KP) / 11.5 l/min (KT) Suction lift: 4.5 mWg Discharge lift: 60 mWg

- Reduces pulsation by up to 97% - Accessories specifically for KNF liquid pumps - A wide range of wetted materials available according to liquid composition, just like the pumps - Maintenance-free - NSF certified materials (optional) FPD06: Flow rate up to 1200 ml/min, maximum allowable discharge pressure 0.2 MPa FPD10: Flow rate from 1300 ml/min, maximum allowable discharge pressure 0.2 MPa FPD1.06: Flow rate up to 1200 ml/min, maximum allowable discharge pressure 0.6 MPa FPD1.10: Flow rate from 1300 ml/min, maximum allowable discharge pressure 0.6 MPa

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted material options Basic flow rate: 70 ml/min (DC-M) / 40 ml/min (DCB / DCB-4) Suction lift: 3 mWg Discharge lift: 10 mWg

- Self-sufficient - Click-on type mount plate - Maintenance-free, contamination-free - Abundant wetted materials Basic flow rate: 230 ml/min (KP) / 210 ml/min (KT) Suction lift: 3.5 mWg (KP) / 2.5 mWg (KT) Discharge lift: 30 mWg

- Reduced pulsation in liquid delivery - Long lifespan design - Excellent linearity - Self-sustaining - Transfer of sensitive liquids - Abundant wetted materials Basic flow rate: 1.5 l/min (KP) / 1.3 l/min (KT) Suction lift: 2.7 mH2O (KP) / 2.5 mH2O (KT) Discharge lift: 20 mH2O

To develop a new ink pump, we first need to look at the end of the inkjet system's value chain... - The next generation of print heads requires high flow rates with minimized pulsation. - High flow rate with reduced pulsation - low pulsation technology. - The stability of the meniscus is crucial for high printing dynamics. - KNF pumps in the degassing system.

- Oil-free - Contamination-free - Maintenance-free - Corrosion resistance - Motor variation - Modular system - Pump customization (project pump)

- The pulsation reduction feature allows for the transfer of liquids with minimal pulsation. - Due to the reduced pulsation, pressure loss in the tubing can be minimized. - It enables the transfer of liquids with fewer air bubbles. - It can reduce the optional parts for pulsation reduction measures. - Equipped with a newly developed valve, it can achieve self-priming suction even at lower motor speeds. - Flow rate adjustment is possible through brushless motor control. - Materials with NFS certification are also available. Basic flow rate: 700 ml/min Diaphragm material: EPDM / PTFE