ケーエヌエフ・ジャパン List of Products and Services

For detailed information, please search for "NF2.35" at the URL below. https://www.knf.co.jp/jp/

To develop a new ink pump, we first need to look at the end of the inkjet system's value chain... - The next generation of print heads requires high flow rates with minimized pulsation. - High flow rate with reduced pulsation - low pulsation technology. - The stability of the meniscus is crucial for high printing dynamics. - KNF pumps in the degassing system.

Main Content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transferring rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications) - Stationary gas pumps - Portable gas pumps

Mainly content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transfer of rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications)

The maintenance procedures for other gas pumps are generally similar, so please refer to them.

The maintenance procedures for other gas pumps are generally similar, so please refer to them.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Traditionally, pulsation reduction was achieved using dampers, but we have significantly suppressed pulsation with the pump itself. - FP70 Series We have integrated the pulsation reduction damper with the pump. - FP150 / FP400 / FK1100 Series We have increased the number of diaphragms to a maximum of five, allowing for the cancellation of pulsation within the pump. - FP1.150 / FP1.400 / FK1.1100 Series We have increased the number of diaphragms to a maximum of five, allowing for the cancellation of pulsation within the pump. Additionally, we have improved the maximum allowable discharge pressure to 6 bar (0.6 MPa), achieving smooth liquid transfer even under challenging pressure conditions.

NPK03 Series Swing Piston Compressor & Pressure Reducing Pump NPK04 Series Swing Piston Compressor & Pressure Reducing Pump NPK06 Series Swing Piston Compressor & Pressure Reducing Pump NPK09 Series Swing Piston Compressor & Pressure Reducing Pump NPK012 Series Swing Piston Compressor & Pressure Reducing Pump

- High discharge design, maximum allowable discharge pressure 0.6 MPa - Reduced pulsation in liquid delivery - Long lifespan design - Excellent linearity - Self-sustaining - Transfer of sensitive liquids - Abundant wetted materials Significantly reduces pulsation using five diaphragms, controls flow rate with an external signal to a brushless DC motor, and demonstrates a linear flow curve based on the control signal. It offers extensive customization for users' technical challenges and various optional parts are available.

The maintenance procedures for the other gas pumps are generally similar, so please refer to them.

- Explosion-proof structure electrical machinery and equipment type certification passed - Increased safety explosion-proof structure, pressure-resistant explosion-proof structure - Motor division grade: Ex II 2G Ex h IIB+H2 T4 Gb

Inkjet Printer Applications - Liquid Pumps - Vacuum Pumps - Compressors - Micro Pumps - Pulsation Dampers - Pressure Regulating Valves, etc. We offer a wide range of wetted components tailored to various ink compositions. Please feel free to contact us regarding any technical challenges related to pump technology for inkjet printers.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. - FP7 Series / FP25 Series The pulsation reduction damper has been integrated with the pump. Two types are available: brushed DC motors and brushless DC motors. Digital customization is also possible with the brushless DC motor.

Features - Long lifespan - Adjustable dispense volume 5-17 μl - Wide flow range - Tight flow in both directions - High chemical resistance - Self-priming - Quiet operation

Features - Long lifespan - Adjustable dispense volume 30-80 μl - Wide flow range - Tight flow in both directions - High chemical resistance - Self-priming - Quiet operation

- Transport of liquid and gas samples for analysis - Medical technology - such as inhalation devices - Vacuum technology - such as chucking Basic flow rate: 12 - 24 l/min ~ Achievable vacuum level: < 100 mbar abs ~ Maximum allowable discharge pressure: 7 bar (0.7 MPa)

- Medical devices - Analytical instruments - Filtration and nebulization - Compressed air supply - Inkjet printer - Security - Food industry Basic flow rate: 2.7 - 3.0 l/min ~ Achievable vacuum level: < 250 mbar abs ~ Maximum allowable discharge pressure: 5 bar (0.5 MPa) *Maximum 2 barG during continuous operation

- Medical devices - Analytical instruments - Filtration and nebulization - Compressed air supply - Inkjet printer - Security - Food industry Basic flow rate: 3.0 l/min ~ Achievable vacuum level: < 300 mbar abs ~ Maximum allowable discharge pressure: 2.5 bar (0.25 MPa) *Maximum 1 barG during continuous operation

- Medical devices - Analytical instruments - Filtration and nebulization - Compressed air supply - Inkjet printer - Security - Food industry Basic flow rate: 2.5 - 3.0 l/min ~ Achievable vacuum level: < 300 mbar abs ~ Maximum allowable discharge pressure: 2.5 bar - 2.8 bar (0.25-0.28 MPa) *Maximum 1 barG during continuous operation

- Transport of liquid and gas samples for analysis - Medical technology - Inhalation devices, etc. - Vacuum technology - Chucking, etc. NPK012 DC-B-M PR Basic flow rate: 8.3 - 12 l/min ± 10% Achievable vacuum level: < 220 mbar abs ~ Maximum allowable discharge pressure: 5 bar (0.5 MPa) * Maximum discharge pressure during continuous operation 2.5 barG NPK012 DC-B-M VA Basic flow rate: 7.0 - 13.5 l/min ± 10% Achievable vacuum level: < 140 mbar abs ~ Maximum allowable discharge pressure: 1 bar (0.1 MPa)

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. It features a high discharge specification. - FP1.7 Series / FP1.25 Series We have integrated the pulsation reduction damper with the pump. Two types are available: brushed DC motors and brushless DC motors. The brushless DC motor also allows for digital customization. We will be exhibiting at JASIS 2025, one of Asia's largest cutting-edge science and analysis systems & solutions exhibitions, where manufacturers of analytical and scientific instruments gather. Please visit our booth. We look forward to seeing you there. ■ Exhibition Name: JASIS 2025 ■ Date: September 3 (Wed) - 5 (Fri), 2025 (3 days) ■ Venue: Makuhari Messe International Exhibition Hall and Conference Center ■ Participation Fee: Free (Pre-registration required) ■ Booth Number: 6B-703