ケーエヌエフ・ジャパン List of Products and Services

- It can be used for the transfer of wet gas and condensate gas. - It can be restarted from a reduced pressure state or a positive pressure state without releasing to the atmosphere. - The brushless DC motor allows for flow rate adjustment via PWM control. - It can be used at ambient temperatures up to 50°C and gas temperatures up to 70°C. - Leak-tight design: 6 x 10^-3 mbar x l/s - A multi-voltage compatible AC converter specification is also available. Basic flow rate: 7 l/min and above Achievable vacuum level: < 100 mbar abs and above Maximum allowable discharge pressure: 2.5 bar (0.25 MPa)

- Maximum allowable discharge pressure 12 bar (1.2 MPa) - Basic flow rate 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification SUS / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10^-3 mbar x l/s

- Maximum allowable discharge pressure: 12 bar (1.2 MPa) - Leak-tight design - Abundant gas contact materials: EPDM / PTFE - Gas transfer for hydrogen, carbon dioxide, helium, etc. Basic flow rate: 130 l/min ± 10% (EPDM diaphragm) 120 l/min ± 10% (PTFE diaphragm) Achievable vacuum level: 100 mbar abs Maximum allowable discharge pressure: 12 bar (1.2 MPa)

Main Content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transferring rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications) - Stationary gas pumps - Portable gas pumps

Mainly content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transfer of rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications)

NPK03 Series Swing Piston Compressor & Pressure Reducing Pump NPK04 Series Swing Piston Compressor & Pressure Reducing Pump NPK06 Series Swing Piston Compressor & Pressure Reducing Pump NPK09 Series Swing Piston Compressor & Pressure Reducing Pump NPK012 Series Swing Piston Compressor & Pressure Reducing Pump

- It can be used for the transfer of wet gases and condensate gases. - It can be restarted from a reduced pressure or positive pressure state without releasing to the atmosphere. - The brushless DC motor allows for flow rate adjustment via PWM control. - It can be used at ambient temperatures up to 50°C and gas temperatures up to 70°C. - Leak-tight design: 6 x 10^-3 mbar x l/s - A multi-voltage compatible AC converter specification is also available. Basic flow rate: 7 l/min and above Achievable vacuum level: < 100 mbar abs and above Maximum allowable discharge pressure: 2.5 bar (0.25 MPa)

IECEx / ATEX compliant explosion-proof diaphragm gas pump

- Can be used for the transport of wet gases and condensate gases. - Can be restarted from a reduced pressure state or a positive pressure state (brushless DC motor). - The brushless DC motor allows for flow adjustment via PWM control. Basic flow rate: 4.2 - 5 l/min ~ Achievable vacuum level: < 30 mbar abs ~ Maximum allowable discharge pressure: 0.1 - 0.3 bar (0.01 - 0.03 MPa)

- Transport of liquid and gas samples for analysis - Medical technology - such as inhalation devices - Vacuum technology - such as chucking Basic flow rate: 12 - 24 l/min ~ Achievable vacuum level: < 100 mbar abs ~ Maximum allowable discharge pressure: 7 bar (0.7 MPa)

- Medical devices - Analytical instruments - Filtration and nebulization - Compressed air supply - Inkjet printer - Security - Food industry Basic flow rate: 2.7 - 3.0 l/min ~ Achievable vacuum level: < 250 mbar abs ~ Maximum allowable discharge pressure: 5 bar (0.5 MPa) *Maximum 2 barG during continuous operation

- Medical devices - Analytical instruments - Filtration and nebulization - Compressed air supply - Inkjet printer - Security - Food industry Basic flow rate: 3.0 l/min ~ Achievable vacuum level: < 300 mbar abs ~ Maximum allowable discharge pressure: 2.5 bar (0.25 MPa) *Maximum 1 barG during continuous operation

- Medical devices - Analytical instruments - Filtration and nebulization - Compressed air supply - Inkjet printer - Security - Food industry Basic flow rate: 2.5 - 3.0 l/min ~ Achievable vacuum level: < 300 mbar abs ~ Maximum allowable discharge pressure: 2.5 bar - 2.8 bar (0.25-0.28 MPa) *Maximum 1 barG during continuous operation

- Transport of liquid and gas samples for analysis - Medical technology - Inhalation devices, etc. - Vacuum technology - Chucking, etc. NPK012 DC-B-M PR Basic flow rate: 8.3 - 12 l/min ± 10% Achievable vacuum level: < 220 mbar abs ~ Maximum allowable discharge pressure: 5 bar (0.5 MPa) * Maximum discharge pressure during continuous operation 2.5 barG NPK012 DC-B-M VA Basic flow rate: 7.0 - 13.5 l/min ± 10% Achievable vacuum level: < 140 mbar abs ~ Maximum allowable discharge pressure: 1 bar (0.1 MPa)

- Process pump - Corrosion-resistant specification Basic flow rate: 31 l/min to 39 l/min (varies depending on diaphragm material) Maximum allowable discharge pressure: 2 bar (0.2 MPa) Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available in Japanese voltage AC single-phase 100V 50/60Hz.

Weight 141g, small piston pump, excellent size-performance ratio, low vibration, low noise, contamination-free, maintenance-free.

- Maximum allowable discharge pressure 12 bar (1.2 MPa) - Basic flow rate 110 l/min (50Hz) to 140 l/min (60Hz) - Corrosion-resistant specification SUS / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

- Maximum allowable discharge pressure: 7 bar (0.7 MPa) *The double diaphragm .12 specification is 3 bar - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specification: .9 specification: 6 x 10-3 mbar x l/s .13 specification / .12 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used up to a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Maximum allowable discharge pressure: 7 bar (0.7 MPa) - Basic flow rate: 58 l/min (50Hz) / 68 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10^-3 mbar x l/s, .13 specification / .12 specification: 6 x 10^-5 mbar x l/s - By using water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Maximum allowable discharge pressure: 0.5 bar (0.05 MPa) - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10-3 mbar x l/s, .13 specification / .12 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Maximum allowable discharge pressure: 12 bar (1.2 MPa) - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10-3 mbar x l/s, .13 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Brushless DC motor - High pumping speed across all areas of positive and negative pressure - Robust and compact - Analog or digital speed control - Pump parameters can be read - Safety features N 938 AN.29 DC-B Basic flow rate: 9 - 35 l/min Achievable vacuum level: < 160 mbar abs Maximum allowable discharge pressure: 1.0 bar (0.1 MPa) N 938.1.2 AN.29 DC-B Basic flow rate: 13 - 53 l/min Achievable vacuum level: < 140 mbar abs Maximum allowable discharge pressure: 1.0 bar (0.1 MPa)

- Can be used for the transport of wet gases and condensate gases. - Can be restarted from a reduced pressure state or a positive pressure state (brushless DC motor). - The brushless DC motor allows for flow rate adjustment via PWM control. Basic flow rate: 5.5 - 6.5 l/min ~ Achievable vacuum level: 100 - 160 mbar abs ~ Maximum allowable discharge pressure: 2.4 - 2.5 bar (0.24 - 0.25 MPa)

N86.0 KNDC Basic flow rate: 6 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KTDC Basic flow rate: 5.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KNDC-B Basic flow rate: 5 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KN.29DC-B Basic flow rate: 3.8 - 5 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KTDC-B Basic flow rate: 4.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KT.29DC-B Basic flow rate: 2.8 - 4.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar

- Process pump - Corrosion-resistant specification Basic flow rate: 27 l/min to 30 l/min (varies depending on diaphragm material) Maximum allowable discharge pressure: 2 - 4 bar (0.2 - 0.4 MPa) Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available in Japanese voltage AC single-phase 100V 50/60Hz.