ケーエヌエフ・ジャパン List of Products and Services

In a decarbonized society and the development of new energy, there are many technical challenges that conventional gas pumps cannot adequately address. We believe that the KNF process pump, with its features listed below, can assist in solving our customers' technical challenges. Main features of the KNF process pump: - Contamination-free - A wide range of gas contact materials - Pressure-specific design with a maximum allowable discharge pressure of 1.2 MPa - Vacuum-specific design - Leak-tight design - Long lifespan design - Explosion-proof specifications (optional IECEx / ATEX) - Heat-resistant specifications with gas temperatures up to 240°C (optional) - Weather-resistant coating (optional)

In a decarbonized society and the development of new energy, there are many technical challenges that conventional gas pumps cannot adequately address. We believe that the KNF process pump, with its features listed below, can assist in solving your technical challenges. Main features of the KNF process pump: - Contamination-free - A wide range of gas contact materials - Pressure-specific design with a maximum allowable discharge pressure of 1.2 MPa - Vacuum-specific design - Leak-tight design - Long lifespan design - Explosion-proof specifications (optional IECEx / ATEX) - Heat-resistant specifications with gas temperatures up to 240°C (optional) - Weather-resistant coating (optional)

IECEx / ATEX compliant explosion-proof diaphragm gas pump

- Explosion-proof structure electrical machinery and equipment type certification passed - Increased safety explosion-proof structure, pressure-resistant explosion-proof structure - Motor division grade: Ex II 2G Ex h IIB+H2 T4 Gb

Main Features (Customization according to the customer's system is possible) Basic Flow Rate: 50 l/min Flow Rate Variable Range: 11.5 – 50 l/min (External Signal Control) Maximum Allowable Discharge Pressure: 0.1 MPa (1 bar) Material: Pump Head Aluminum / Diaphragm EPDM Motor: Brushless DC Motor 24V * 48V specification is also available as an option Guaranteed Lifespan: Over 10,000 hours of continuous operation at the maximum allowable discharge pressure of 0.1 MPa * The expected lifespan may be longer depending on flow rate (motor speed), discharge pressure conditions, etc. (Internal tests are ongoing with over 100,000 hours)

- Achieves high vacuum with excellent exhaust speed - Robust design - Low vibration and low noise design N952KNDC-B Basic flow rate: 11 - 36 l/min Exhaust speed: 0.66 - 2.16 m³/h Achievable vacuum level: 1.5 mbar abs Maximum allowable discharge pressure: 1 bar (0.1 MPa) N952KTE-W Basic flow rate: 32 l/min Exhaust speed: 1.92 m³/h Achievable vacuum level: 2 mbar abs Maximum allowable discharge pressure: 1 bar (0.1 MPa) N952KT.29E-W Basic flow rate: 9 - 32 l/min Exhaust speed: 0.54 - 1.92 m³/h Achievable vacuum level: 2 mbar abs Maximum allowable discharge pressure: 1 bar (0.1 MPa)

In a decarbonized society and the development of new energy, there are many technical challenges that conventional gas pumps cannot address. We believe that the KNF process pump, with its features listed below, can assist in solving your technical challenges. Main features of the KNF process pump: - Contamination-free - A wide range of gas contact materials - Pressure-specific design with a maximum allowable discharge pressure of 1.2 MPa - Vacuum-specific design - Leak-tight design - Long lifespan design - Explosion-proof specifications (optional IECEx / ATEX) - Heat-resistant specifications with gas temperatures up to 240°C (optional) - Weather-resistant coating (optional)

- It can be used for the transfer of wet gas and condensate gas. - It can be restarted from a reduced pressure state or a positive pressure state without releasing to the atmosphere. - The brushless DC motor allows for flow rate adjustment via PWM control. - It can be used at ambient temperatures up to 50°C and gas temperatures up to 70°C. - Leak-tight design: 6 x 10^-3 mbar x l/s - A multi-voltage compatible AC converter specification is also available. Basic flow rate: 7 l/min and above Achievable vacuum level: < 100 mbar abs and above Maximum allowable discharge pressure: 2.5 bar (0.25 MPa)

Main Content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transferring rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications) - Stationary gas pumps - Portable gas pumps

Mainly content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transfer of rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications)

- Maximum allowable discharge pressure 12 bar (1.2 MPa) - Basic flow rate 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification SUS / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10^-3 mbar x l/s

- Basic flow rate N922 8L: 7.5 l/min / N922 16L: 16 l/min - Achievable vacuum level 200-350 mbar abs - Maximum allowable discharge pressure 1.5 bar (0.15 MPa) - Corrosion-resistant specification PTFE - Robust design that withstands tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

- Basic flow rate 7.5 l/min - Achievable vacuum level 140 mbar abs - Maximum allowable discharge pressure 1.5 bar (0.15 MPa) - Corrosion-resistant specification PVDF / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

- Can be used for the transport of wet gases and condensate gases. - Can be restarted from a reduced pressure state or a positive pressure state (brushless DC motor). - The brushless DC motor allows for flow adjustment via PWM control. Basic flow rate: 4.2 - 5 l/min ~ Achievable vacuum level: < 30 mbar abs ~ Maximum allowable discharge pressure: 0.1 - 0.3 bar (0.01 - 0.03 MPa)

- Process pump - Corrosion-resistant specification Basic flow rate: 33 l/min to 39 l/min (varies depending on diaphragm material) Achievable vacuum level: < 100 mbar abs Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available for Japanese voltage AC single-phase 100V 50/60Hz.

- Process pump - Corrosion-resistant specification Basic flow rate: 31 l/min to 39 l/min (varies depending on diaphragm material) Maximum allowable discharge pressure: 2 bar (0.2 MPa) Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available in Japanese voltage AC single-phase 100V 50/60Hz.

- Process pump - Corrosion-resistant specification Basic flow rate: 18 l/min to 22 l/min (varies depending on diaphragm material) Achievable vacuum level: < 20 mbar abs Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available for Japanese voltage AC single phase 100V 50/60Hz.

- Maximum allowable discharge pressure 12 bar (1.2 MPa) - Basic flow rate 110 l/min (50Hz) to 140 l/min (60Hz) - Corrosion-resistant specification SUS / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

- Maximum allowable discharge pressure: 7 bar (0.7 MPa) *The double diaphragm .12 specification is 3 bar - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specification: .9 specification: 6 x 10-3 mbar x l/s .13 specification / .12 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used up to a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Maximum allowable discharge pressure: 7 bar (0.7 MPa) - Basic flow rate: 58 l/min (50Hz) / 68 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10^-3 mbar x l/s, .13 specification / .12 specification: 6 x 10^-5 mbar x l/s - By using water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Maximum allowable discharge pressure: 0.5 bar (0.05 MPa) - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10-3 mbar x l/s, .13 specification / .12 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Maximum allowable discharge pressure: 12 bar (1.2 MPa) - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10-3 mbar x l/s, .13 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

- Can be used for the transport of wet gases and condensate gases. - Can be restarted from a reduced pressure state or a positive pressure state (brushless DC motor). - The brushless DC motor allows for flow rate adjustment via PWM control. Basic flow rate: 5.5 - 6.5 l/min ~ Achievable vacuum level: 100 - 160 mbar abs ~ Maximum allowable discharge pressure: 2.4 - 2.5 bar (0.24 - 0.25 MPa)

N86.0 KNDC Basic flow rate: 6 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KTDC Basic flow rate: 5.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KNDC-B Basic flow rate: 5 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KN.29DC-B Basic flow rate: 3.8 - 5 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KTDC-B Basic flow rate: 4.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KT.29DC-B Basic flow rate: 2.8 - 4.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar

- Process pump - Corrosion-resistant specification Basic flow rate: 27 l/min to 30 l/min (varies depending on diaphragm material) Maximum allowable discharge pressure: 2 - 4 bar (0.2 - 0.4 MPa) Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available in Japanese voltage AC single-phase 100V 50/60Hz.