シロ産業 Product Lineup

■Features The non-contact temperature can be adjusted to match the measured object with an emissivity range of 0.01 to 1.00. The distance coefficient is 11:1 to ensure accurate measurements of distant objects. The MI1RA-TEM can display the maximum temperature, minimum temperature, deviation between maximum and minimum temperatures, and average temperature during measurement. It also has a function to sound an alarm when the specified maximum and minimum temperatures are reached. In infrared radiation thermometer mode, the device will automatically stop after 60 seconds of inactivity, but it also includes a lock mode to disable the automatic stop for continuous surface temperature measurements. For the food industry, the MI1RA-TEM can be delivered as a set with a piercing temperature sensor and probe sterilization wipes (70 sheets) in a hard case.

• Radiation thermometer

● Dual display of kilograms and newtons is possible ● Bright and easy-to-read red LED display (brightness can be adjusted in 5 levels) ● Basic operations such as tare can be performed via remote control

• Scale

K thermocouple Auto power off Data hold Burnout indication

• Thermometer

■Easy-to-use automatic mode ● The alarm automatically activates when the heat stroke index reaches 28°C or 31°C. ● Displays the danger level rank of the heat stroke index (4 ranks: Caution, Warning, Severe Warning, Danger) ■Setting mode where alarm values can be changed ● Allows arbitrary setting of the heat stroke index alarm value (setting range: 21°C to 60°C) ● Timer function to manage work and break times (setting range: 1 minute to 4 hours)

• Other environmental analysis equipment

■Features ●Easy Operation Simply point the sensor towards the direction you want to measure and press the switch for 2 to 3 seconds to easily measure the distance to the target. *Measurement may not be possible if the target is sludge or seaweed.

• Distance measuring device

● The real-time oxygen concentration can be monitored on a large LCD. ● Compact and easy to hold design. There is a soft case available as an option. ● Alarm concentration settings can be configured in two stages, with options for upper and lower limits. ● The alarm features an easily identifiable electronic buzzer sound. ● Two red LEDs indicate the alarm. ● You can choose between alarm hold or automatic reset. ● Using external alarm output, control of rotating lights and solenoid valves is possible. ● An analog output of 0-1V can be used to extract oxygen concentration externally.

• Other environmental analysis equipment

Low-cost binocular stereo microscope with upper and lower LED lighting.

• Other microscopes

■Features ●Fully automatic operating environment All complex operations of the X-ray equipment, from initial adjustments (calibration) to inspection and power off, are performed automatically. ●High-precision sensor Using a high-precision X-ray line sensor, it can capture foreign objects as small as 300μm (micrometers). (Note: The standard is based on SUS balls, and depending on the material, clear images may not be obtained.) ●Ultra-fast processor Equipped with a 64-bit ultra-fast CPU (Core i7) and a large 8GB memory to process large-capacity X-ray images at high speed, achieving more than double the processing capability (compared to our company). Specifications may change without notice for performance improvement. ●Dual monitor Standard dual monitors allow for simultaneous inspection while displaying a total of six screens, including different screen settings and point magnification. ●Full-color display The full-color inspection screen makes it easier to detect foreign objects. ●Variable speed shooting Depending on the target product, shooting can be selected at three speed levels: high speed, standard, and low speed (high precision).

• X-ray inspection equipment

■Installation example of the illuminance transmitter MC8D2021T series for monitoring the intensity of lighting. Generally, for this type of application, the MC8D2021T series should be installed on the ceiling close to the area where illuminance monitoring is needed. If necessary, measure the installation position of the transmitter with a reference illuminance meter and use this as a basis to fine-tune the output values of the MC8D2021T series.

• Other measurement, recording and measuring instruments

■Features ● Newly developed MLSS detector with reference light A high-performance MLSS detector equipped with a reference light sensor that constantly monitors the brightness of the LED, automatically compensating for light fluctuations due to LED degradation and temperature changes, which can lead to measurement errors. ● High-sensitivity MLSS detector for near-infrared light that is unaffected by external light ● Shock-absorbing rubber for the detector ● Selectable measurement modes for different applications Based on 30 years of accumulated technology and rich data, measurement modes that are linearized for specific applications can be selected, and on-site zero and span four-point calibration is also possible. Examples: - Dairy and food sludge mode - Food sludge mode - Combined sewage treatment tank mode - Sewage treatment sludge mode - Excreta treatment sludge mode - Sedimentation concentration sludge mode ● Ergonomic design with anti-slip structure ● Measurement range: 0 to 20000 mg/L, with a maximum display of up to 30000 mg/L ● Waterproof according to IP67 standards ● Economy type, popular model, high-sensitivity MLSS meter dedicated to MLSS measurement. While it does not have a water depth measurement function, it offers high performance equivalent to the SS-5Z at an economical price.

• Water quality testing

● Newly developed MLSS detector with reference light Equipped with a reference light sensor that constantly monitors the brightness of the LED, this high-performance MLSS detector automatically corrects measurement errors due to variations in light intensity caused by LED degradation or temperature changes. ● Near-infrared high-sensitivity MLSS detector unaffected by external light ● Shock-absorbing rubber for the detector ● Simultaneous measurement of MLSS and water depth (interface) with a single unit MLSS and water depth (interface) are displayed simultaneously, and near the set sludge concentration, the display's "ALM" and "mg/l" indicators blink to signal the sludge interface. ● Selectable measurement modes for different applications Based on 30 years of accumulated technology and rich data, measurement modes that are linearized for specific applications can be selected, and zero and span four-point calibration can also be performed on-site. ● Examples: - Dairy and food sludge mode - Food sludge mode - Combined sewage treatment tank mode - Sewage treatment sludge mode - Excreta treatment sludge mode - Settled concentrated sludge mode

• Water quality testing

■mV Mode In mV mode, it is possible to measure the electrode's activation force and determine its quality. ■Handling of Ion Electrodes When measuring the concentration of sample water using chloride ion electrodes or fluoride ion electrodes, it is necessary to add an ionic strength adjuster during calibration and measurement to ensure that the measurement is not affected by the ionic activity strength or pH of the sample water.

• Water quality testing

■Overview The fluoride ion electrode uses a single crystal of lanthanum fluoride (LaF3) as the sensing membrane to measure the concentration of free fluoride ions in aqueous solutions. It cannot measure the total fluoride concentration of complexed fluoride compounds. It is used in fields such as process control in semiconductor manufacturing plants, glass factories, and fluoropolymer manufacturing plants, as well as in water quality management for factory wastewater and drinking water. ■Fluoride Ion Electrode with Automatic Temperature Compensation The semiconductor temperature element automatically corrects errors due to temperature changes. ■High-Performance Fluoride Ion Electrode A fluoride ion electrode capable of measuring from low to high concentrations. It can measure with a linear characteristic from 0.1 to 1999 mg/L. As with the chloride ion electrode, it is necessary to add an ionic strength adjusting agent (ISAB) during calibration and measurement to maintain constant pH and ionic strength. ■mV Mode In mV mode, it is possible to measure the electrode's activation force and determine its condition. ■Automatic Measurement Range Switching Function In the measurement range of 100 to 2000 mg/L, it automatically switches to a resolution of 1 mg/L, and below 99.9 mg/L, it switches to a resolution of 0.1 mg/L.

• Water quality testing

■Waterproof structure (equivalent to IP67) ● Waterproof / drip-proof plug / connector, waterproof gasket adopted It can be safely used even in outdoor conditions during rain or in case of emergencies, as the instrument is waterproof. ■Backlight function ● With a backlight function, it can be read in dark places. During measurement mode, press the backlight switch → LED lights up → automatically turns off after 3 seconds. ■Measurement value memory function ● Pressing the MEMO. key will store the measurement value. You can recall the memory data using the ▲▼ keys. It can store and recall up to 30 measurement values.

• Water quality testing

●Low residual current galvanic type ●Cartridge-type diaphragm replacement unit ●Water quality meter with anti-slip and drop prevention features, IP65 compliant waterproof structure ●Standard included dirt-resistant vinyl cover ●Seawater/freshwater switching measurement function ●With backlight function ●With memory function

• Water quality testing

● Large weighing platform of 1100mm × 1100mm Cable length to the display unit: approximately 5m, pallet material: polypropylene (PP), weighing frame material: steel (SS400) ● Sorting weighing function ● Cutting weighing function For weighing bulk bags, etc. ● Counting function Ideal for managing the count of large parts. Equipped with digital tare function. ● Memory function Four types of memory convenient for counting. ● Display stand included as standard, built-in printer available separately.

• Scale

●Memory Function Four types of memory convenient for counting devices. ●Standard display stand included, with an optional built-in printer available for purchase.

• Scale

● Handheld digital torque gauge that can be used with an integrated display. When the display is separated, it becomes a stationary digital torque gauge. By separating the display and using a table attachment (sold separately), it transforms into a professional micro digital torque meter. ● Available in four series, compatible with 0.1 to 5 cN·m (1 to 50 mN·m). ● Ideal for torque measurement of electronic components such as small motors, encoders, and potentiometers. ● Accuracy ±2% + 1 digit, CE marked. Compliant with RoHS directive. ● Can store 999 data points. Equipped with USB output. ● Measurement can be performed using an external AC power supply via a USB power adapter (sold separately: MD31A-5T) and connection cable (sold separately: MD31384T). ● When connected to a computer, it can draw power from the computer for measurement. Data communication is also possible. ● Data acquisition software "Excel Receiver" can be downloaded for free from the website, allowing for data collection, analysis, graphing, and printing. * "Excel Receiver" is a data input tool. Please prepare a PC with Excel installed separately.

• Torque Meter

The digital viscometer MG1C-10 can measure a wide viscosity range from 1 mPa·s to 800 Pa·s. (The low viscosity CC type is a dedicated model.) ● It uses a coaxial double cylinder rotational viscometer and a spiral pump structure to measure highly thixotropic materials with good reproducibility, allowing for continuous measurement of viscous substances that change viscosity due to stirring. (Shear rate and shear time are constant.) ● High-precision measurements can be performed for LED materials and general electronic materials. ● By exchanging three types of rotors (A, B, C), a wide measurement range can be achieved. ● Automatic measurement and data analysis can be performed with a dedicated program via USB communication. (Optional) ● A special specification AA type that supports up to 2000 Pa·s is also available in the lineup.

• Viscometer

■Fast Measures in just 2 seconds, 1/5 the speed of thermistor thermometers ■Clean Washable structure that can be rinsed with water ■Clear Large LCD display that is easy to read ■Durable Resistant to drops and not easily broken Functions normally after falling from a height of 1 meter ■Long-lasting Product lifespan of over 2 years with 3 hours of use per day (over 2500 hours) *Battery replacement is not possible to maintain waterproof structure. ■Reliable High-quality Japanese manufacturing Issuance of inspection reports and traceability certificates available (sold separately)

• Thermometer

● The handheld refractometer allows anyone to easily measure sugar content by simply placing juice or other samples on the sample plate and pressing the measurement button. ● The handheld refractometer has a wide measurement range of 0-85% and achieves high accuracy with a precision of ±0.2%. It covers almost all food samples with this one device. Its compact design allows for a firm grip, making it easy to operate with one hand, whether left or right. ● The handheld refractometer features a newly designed measurement section that is resistant to external light, allowing measurements to be taken outdoors in environments where direct sunlight does not hit, such as under the shade of fruit trees or eaves of work sheds. ● The handheld refractometer is waterproof (IP65). After measurement, cleaning is simple—just rinse the sample with tap water to easily clean it. After that, just wipe off any moisture and store it, and you can use it for a long time. Additionally, the handheld refractometer floats on water, so you can be assured if it falls into the water.

• Other measurement, recording and measuring instruments

Weighing only 150g, it can brightly capture targets and approach up to 35cm. It is completely waterproof and filled with argon gas, ensuring it won't fog up.

• Optical microscope

The Becquerel meter, certified by ISO 9001, is designed so that even those without specialized knowledge can easily check for gamma radiation contamination in various foods, vegetables, water, milk, fish, meat, soil, powders, and solid materials. It uses cutting-edge technology with CsI scintillators and silicon photodiodes, allowing measurement results to be obtained in a few minutes to 45 minutes. For example, if a vegetable contains 3000 Bq (Becquerel) of radioactive material per kg, good test results can be obtained in about 10 minutes. The Becquerel meter can perform zero calibration for background radiation in the atmosphere, ensuring high-accuracy measurements. Gamma radiation activity measurement is displayed in Bq/L or Bq/kg, with a measurement error of ±10% or less (for cesium-137), covering a wide range from approximately 25 Bq/kg to 10 MBq/kg.

• Radiation detector

●Large lenses that are easy to see with both eyes ●Includes a protective cover for the lens ●White glass lens that does not change the color of what you see ●Uses an inverter system that eliminates flickering when the switch is turned on

• Optical microscope

■ It can switch between combustible gas and refrigerant gas detection with one unit. By replacing the sensor at the probe tip, it is possible to switch between combustible gas detection and refrigerant gas detection. ● The level is displayed with an LED. ● It can provide audio alerts (with mute function). ● The probe tip lights up according to the gas level. ● It performs automatic zero calibration, eliminating the need for regular calibration. ● It is an automatic suction type.

• Other measurement, recording and measuring instruments
• Odor Testing
• Other inspection equipment and devices

● Large LCD display ● Temperature and humidity readings automatically switch every 14 seconds ● Simple design

• Thermo-hygrometer

● Environmentally friendly solar-powered thermometer ● Large digital display, character height 45mm ● Convenient three mode switching A: Current temperature display B: Alternating display of current temperature and current time C: Alternating display of current temperature, maximum temperature, minimum temperature, and current time

• Thermometer

■Features ●Wide measurement temperature range: -40 to 200℃ ●High accuracy: ±0.5℃ ●Includes calibration certificate ●Meets IP54 waterproof structure ●Maximum/Minimum/Hold function ●One-handed operation possible with sensor holder ●Complies with EN13485

• Thermometer

- For wind speed detection, magnetic pulses are used, and for wind direction detection, a light encoder is adopted. The signal extraction is designed with a brushless structure, which excels in resistance to aging and ambient temperature effects. - The adoption of a brushless structure and the use of plastic for the propeller and body result in a low starting wind speed of 0.3 m/s, allowing measurements from light winds (0.4 m/s) to strong winds (70 m/s). - The responsiveness to wind speed fluctuations has dramatically improved, with a time constant of less than 4.0 m (compared to the conventional 8.0 m). - The transmitter outputs a linearized analog signal, allowing for direct connection to data loggers and recorders. - The main body weighs 3.2 kg, making it compact and lightweight (compared to the conventional model at 5.9 kg), and the mounting method is a plug-in type, which allows for easy attachment and detachment from steel pipe supports at high locations. (The traditional flange mounting method is also available as an option.)

• Wind Speed/Volume Meter

● Although it is a mechanical scale, it is characterized by high precision and a wide variety of weights that can measure from 10kg to 3t. ● There are also models with wheels for easy mobility ("with wheels") and models that prevent the spring from stretching by putting the scale in a resting state ("resting model"). ● The MD10T-79-*ST type is suitable for use in fisheries and food processing environments.

• Scale

● No power supply needed ● Husband ● Easy to read load transition ● Advanced styling that fits in the hand ● Durable body made of lightweight aluminum alloy ● Maintains high precision for a long time with special material springs and unique indicators ● Peak hold (stop needle) function ● Pointer zero point adjustment mechanism ● Easy-to-read scale design ● Comes with various attachments and storage case ● Long-term warranty (12 months)

• Other measurement, recording and measuring instruments

Light source Semiconductor laser (wavelength 780nm, rated output 35mW) Rated flow rate 2.83 L/min

• Other measurement, recording and measuring instruments

■Features ●Improved measurement accuracy. Peak values can be measured at a high speed of 1000 times per second. Normal measurements can also be selected at a maximum of 20 times per second. Display cycle: 1 time/second, 2 times/second, 3 times/second, 5 times/second, 10 times/second, 20 times/second ●Adopts a reverse display method that allows the displayed value and unit to be inverted with one touch ●Unit switching between N, kg (g) can be done with one touch ●Peak value measurement is possible

• Other measurement, recording and measuring instruments

The M829T-7200FHN/M829T-7400FHN is a portable measuring device that can accurately measure thicknesses up to 10mm. Due to its compact and portable design, it can be used in manufacturing plants and quality inspection laboratories. The M829T-7200FHN/M829T-7400FHN can easily and accurately measure the thickness of non-magnetic materials, regardless of size, shape, or material, without causing damage. It is ideal for applications that require precise measurements of sharp corners, small radii, or complex shapes.

• Other measurement, recording and measuring instruments

When not in use, the probe can be folded, so there is no worry about the probe breaking or damaging something with the probe. Simply opening the probe to a 30° angle turns on the power and allows you to measure the center temperature of food. HACCP International certification, compliant with EN13485 standards. The MD34TE-103T is protected with an IP55 rating, safeguarding it from splashes of water. The MD34TE-104T has an IP65 rating, allowing it to be washed under running water after measurement.

• Thermometer

Easy-to-read display for simple visual confirmation of the type of buried objects and their thickness. Easy operation with few buttons.

• Other measurement, recording and measuring instruments

● You can see the necessary information at a glance with the dual LCD. ● Equipped with a data hold function (maximum/minimum/average).

• Wind Speed/Volume Meter

● You can select any two of humidity, temperature, or dew point temperature to display simultaneously. ● IP54 (Dust protection level 5 for operational safety, dust prevention, and water protection level 4 for splashing water).

• Thermo-hygrometer

● It supports K-type thermocouple sensors, allowing for various sensor variations to be used. ● It is a thermometer with a bright display that is easy to read. ● Available in single-point detection type (MF6K-100SF) and two-point detection type (MF6K-102SF). ● It has a battery level indicator, so you can use it with peace of mind. ● It has a sturdy ABS body that is IP-54 compliant. ● It can also be made splash-proof with an optional feature (MF6EP-100F).

• Thermometer

<MD34T-176T4S> This is a USB temperature data logger that can simultaneously measure temperatures at up to four different locations. It can connect external thermocouple type T, type K, and type J temperature sensors. You can easily check whether the temperature indoors or within a facility is within the specified range. <MD34T-176H1S> You can connect up to two temperature or temperature/humidity probes, allowing for installation in indoor environments or constant temperature and humidity chambers according to individual requirements. The display shows not only the current temperature and humidity values but also the dew point (when a temperature/humidity probe is connected). The large display shows the limit values set by the program, minimum/maximum values, limit exceedances, and battery level, making it easy to get an overview of the temperature and humidity logger's data without needing to read it on a PC. <MD34T-176P1S> This is a temperature and humidity data logger with a built-in barometric pressure sensor. It is an ideal product for accurately recording environmental conditions in laboratories and research facilities. It is a 5-channel data logger that can connect up to two temperature and humidity probes for high-precision measurements, and it also includes a barometric pressure sensor that accurately measures absolute pressure from 600 to 1,100 hPa.

• Data Logger

<MD34T-176T1S> This is a USB temperature data logger with a robust body that incorporates a Pt100 temperature sensor, capable of monitoring temperature with high precision even under harsh conditions. <MD34T-176T2S> This is a USB temperature data logger that can connect two external Pt100 probes to simultaneously record the temperature at two measurement points. <MD34T-176T3S> This device supports the connection of up to four thermocouple probes (K/T/J thermocouple temperature probes), allowing for simultaneous measurement at up to four locations. <MD34T-176H2S> This data logger can connect two external cable-type temperature and humidity probes, enabling simultaneous measurement of temperature and humidity at two different locations.

• Data Logger

● Depending on the application, a wide variety of thermocouples can be selected from standard specifications. You can choose an external thermocouple probe that suits your application, allowing for flexible adaptation to user needs. Probes are available for surface temperature, gas, immersion core temperature, etc., and while the measurement range and accuracy vary depending on the selected thermocouple probe, they can measure temperatures from -50 to +1,000°C. ● The display shows important information such as the current measurement value, threshold, points exceeding the threshold, minimum/maximum values, and battery level. All these values can be read directly from the display, so there is no need to start a PC. ● It features a large-capacity memory that can store up to 1 million measurement results and a long battery life of up to 3 years. It uses three AA batteries for power. Additionally, the stored data is protected from loss during battery depletion or replacement, ensuring high safety. ● You can choose from three versions of software that allow you to configure the logger, read data, and analyze the acquired measurement data on a PC.

• Data Logger

■Data can be imported to a computer via USB or SD card. Not only has functionality improved, but security has also been enhanced, allowing for safe and reliable use. It is equipped with a built-in pressure sensor that records not only temperature and humidity but also atmospheric pressure. The data logger features a mini USB port and an SD card slot, making it easy to transfer data recorded on the data logger to a computer using a commercially available USB cable or SD card. Additionally, the adoption of large-capacity memory and compatibility with commercially available batteries have improved convenience.

• Data Logger

●Easy to operate, and troublesome calibration work can be done easily. ●It has high performance with an accuracy of ±0.2℃. ●Compact and portable, it can be taken anywhere. ●NIST certified calibration certificate.

• Radiation thermometer

● Widely compatible with existing refrigerants such as R134a, R404A, R407C, R410A, and R22. ● Supports detection of small leaks with a maximum sensitivity of 0.5g/year (with R410A, H5). ● Achieves a fast response time (within 0.5 seconds, in H5 range). ● Equipped with a zero reset button on the probe (only for MF6ER-100HBF). ● Can be easily attached to the main unit with a one-touch connection to the separately sold refrigerant gas calibrator MF6LS-150F. ● Built-in automatic alarm function that alerts with a buzzer sound and LED when the sensor is disconnected. ● Standard equipped with a flow meter in the main panel, allowing constant monitoring of the suction state. ● Clear detection judgment with a buzzer sound that has a scale and a speaker located on the front of the main unit. ● Standard equipped with external outputs for analog voltage output and alarm contact output. ● Designed for low running costs with a long sensor lifespan and fewer consumables.

• Odor Testing
• Other environmental analysis equipment