ローデ・シュワルツ・ジャパン Product Lineup

The "R&S Scope Rider RTH" is a high-performance yet robust and portable design, serving as a versatile measurement tool for development and field use. It exhibits performance and capabilities equivalent to an oscilloscope for development purposes, while also offering the convenience and durability of a battery-operated handheld device. Additionally, it is equipped with up to four CAT IV 600 V rated isolated input channels, allowing for safe measurement of high-voltage electronics. 【Features】 ■ 7-inch, 800×480 pixel capacitive touch display ■ Over 4 hours of battery life ■ Measurement mode switching ■ One-touch report generation: Easily save screenshots/measurements ■ Robust dust and water resistance ■ Large buttons operable while wearing gloves *For more details, please download the PDF or feel free to contact us.

• oscilloscope

The "R&S RTB 2 Series" is an oscilloscope that combines advanced operational concepts with the Power of Ten, making it an ideal general-purpose tool for students, enthusiasts, technicians, and engineers. Equipped with our customized 10-bit A/D converter, it offers four times the resolution compared to traditional 8-bit A/D converters. The improved resolution allows for sharper waveforms, revealing the details of signals. 【Features】 ■ 10-bit ADC ■ 10M points of memory ■ 10.1-inch capacitive touchscreen ■ Startup time of just 10 seconds ■ A single device serving ten functions *For more details, please download the PDF or feel free to contact us.

• oscilloscope

The "R&S RTM3000" is an oscilloscope designed as a tool for everyday problem-solving. It features the Power of Ten (10-bit ADC, 10 times the memory, 10.1-inch touchscreen) and is compatible with all Rohde & Schwarz probes through the Rohde & Schwarz probe interface. Additionally, it is offered at a very attractive price, meeting important conditions for investment protection. 【Features】 ■ 100 MHz to 1 GHz ■ 10-bit ADC ■ 80 M samples of standard memory ■ 10.1-inch capacitive touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

It features class-leading signal integrity and ultra-large memory. With the addition of class-leading noise characteristics and memory capacity to the 10-bit ADC designed by Rohde & Schwarz, it provides sharp waveforms, highly accurate measurements, and reliability even when faced with unexpected measurement challenges.

• oscilloscope

The "MXO 3 Series" is a product that combines advanced hardware and software technology to achieve fast and highly accurate measurements in a compact form. It provides the freedom and versatility required for business without compromising on results. It boasts top-class accuracy in its category and is equipped with a high-sensitivity digital trigger that can detect even the slightest changes in minute signals. Due to its small footprint and lightweight design, it can be easily installed on crowded benches, and moving it to different measurement locations is also straightforward. 【Features】 ■ Industry-leading update speed (4.5 million times/second) ■ Top-class real-time signal capture (up to 99%) ■ High-performance and highly flexible digital trigger ■ 125M points of large-capacity standard memory ■ All models feature a space-saving design that fits neatly on a bench *For more details, please download the PDF or feel free to contact us.

• oscilloscope

The "MXO 4 Series" is a product that achieves high-speed analysis with rapid insights through groundbreaking technological innovation. It features a 13.3-inch full HD capacitive touchscreen and an intuitive user interface, allowing users to master the operation in just 15 minutes. It achieves an update speed exceeding 4.5 million waveforms per second and is equipped with one of the industry's largest standard memory capacities of 400 million points per channel. 【Features】 ■ Achieves an update speed exceeding 4.5 million waveforms per second ■ 12-bit ADC available at all sampling rates ■ Fastest in its class with highly accurate spectrum analysis ■ Equipped with one of the industry's largest standard memory capacities of 400 million points per channel ■ Industry-leading trigger rearming time of 21 ns ■ Class-leading trigger jitter of less than 1 ps *For more details, please download the PDF or feel free to contact us.

• oscilloscope

The "R&S MXO 5 Series" is a high-speed, accurate signal analysis oscilloscope with a maximum of 8 channels, achieving an update rate of 4.5 million waveforms per second. Each channel is equipped with a digital trigger system with a minimum vertical axis of 0.0001 div. The system architecture, which realizes 18-bit vertical axis resolution, ensures reliable triggering even for minute waveforms. 【Features】 ■ Performs 45,000 FFTs per second, capable of simultaneous analysis of up to 4 spectra ■ Standard memory of 500M points is parallelly equipped for each channel ■ Equipped with a 15.6-inch full HD capacitive touchscreen ■ Available in 8-channel and 4-channel models ■ Bandwidth: 8 channels: 100MHz to 2GHz, 4 channels: 350MHz to 2GHz A live demo showcasing the clear performance differences from conventional models is currently available on our website. *For more details, please check our website. Feel free to contact us with any inquiries.

• Other machine elements

The "wideband passive probe," which achieves low noise and high linearity, is a low-cost solution for measuring controlled impedance lines. Its compact design makes it easy to measure on densely populated printed circuit boards. It can be used as a low-cost and powerful measurement tool instead of an active probe when measuring high-speed signals on low-impedance lines. 【Features】 ■ Nearly constant across the entire frequency range ■ Extremely low input capacitance and low noise ■ High linearity, suitable for spectrum analysis applications ■ Standard accessories - Soldering pins, rigid chips, soldering ground pins, spring-loaded ground chips, pin connector adapters, etc. *For more details, please download the PDF or feel free to contact us.

• probe

The "Passive Probe" is our standard oscilloscope accessory. Equipped with a BNC connector, it can be used with almost any oscilloscope. When a passive probe with lead-out pins is connected to our oscilloscope, the attenuation ratio is automatically detected. The built-in spring chip allows for reliable contact with the DUT. 【Features】 ■ Precision measurement with individual adjustments ■ Abundant accessories - Spare spring-loaded chips, rigid chips, ground contact springs, ground leads, color-coded rings *For more details, please download the PDF or feel free to contact us.

• probe

We offer a variety of "active wideband probes." These feature a high input impedance of 1 MΩ, a low input capacitance of less than 1 pF, and a wide dynamic range. They also include beneficial features such as offset correction, a high-precision built-in voltmeter, and convenient micro buttons for oscilloscope control. Please feel free to consult us when you need assistance. 【Features】 ■ Wideband design ■ Minimization of impact on measurement signals ■ Wide dynamic range and high linearity ■ Convenient measurement instrument control via built-in micro buttons ■ R&S ProbeMeter: built-in high-precision voltmeter ■ Built-in memory and future-proof probe interface *For more details, please download the PDF or feel free to contact us.

• probe

The "Modular Wideband Probe" is an easy-to-use solution that employs advanced technology to meet the requirements of current probing. It features a unique multi-mode capability, allowing users to switch between differential mode, common mode, and single-ended mode. The system includes probe chip modules to accommodate various measurements and conditions, and the built-in R&S ProbeMeter function enables high-precision DC voltage measurements to be performed simultaneously. 【Features】 ■ Amplifier modules with bandwidths ranging from 1.5GHz to 16GHz are available ■ Automatic detection and setup of the probe with our oscilloscopes ■ Equipped with a unique multi-mode function ■ Highly flexible, allowing setups for various measurements ■ Access to multiple probe points with a single probe chip *For more details, please download the PDF or feel free to contact us.

• probe

Our "Current Probe" is a product that allows for accurate measurement of DC and AC current levels without affecting the circuit. By using this product, you can precisely measure DC/AC current without disconnecting the power circuit during measurement. Additionally, it features a robust design that is easy to operate. Demagnetization and offset correction can be performed directly at the probe connector. 【Features】 ■ DC/AC measurement without interrupting the circuit ■ Reliable design and easy operation ■ Easy skew correction for simultaneous current/voltage measurement ■ External power supply supporting up to 4 current probes *For more details, please download the PDF or feel free to contact us.

• probe

The "Power Rail Probe" is a product that allows for instant measurement of DC voltage using a built-in high-precision DC voltmeter. With its wide bandwidth, high sensitivity, ultra-low noise, and very large offset correction, it is well-suited for evaluating power rail characteristics. It enables accurate ripple measurements with a bandwidth of up to 4.0 GHz, and its 1:1 attenuation ratio and low noise achieve excellent sensitivity. 【Features】 ■ Bandwidth of up to 4.0 GHz with extremely low added noise ■ Measurement of small voltages on large DC offsets ■ R&S ProbeMeter: Built-in high-precision DC voltmeter ■ Comprehensive accessory package *For more details, please download the PDF or feel free to contact us.

• probe

We would like to introduce our "Multi-Channel Power Probe." With up to four voltage channels and four current channels featuring 18-bit resolution, it supports current/voltage measurements over a wide dynamic range. By attaching two R&S RT-ZVC probes to an R&S RTO6 or R&S RTP oscilloscope, you can analyze eight voltage signals and eight current signals in parallel using the signals captured by the oscilloscope. 【Features】 ■ Extremely wide dynamic range due to 18-bit ADC resolution ■ Switchable sensitivity for internal/external shunt current measurements ■ Noise reduction through wide bandwidth and flexible filtering ■ Simultaneous accurate measurement of up to eight power rails ■ Ultra-low noise front end for sensor signal measurements ■ Flexible connection options to accommodate various applications *For more details, please download the PDF or feel free to contact us.

• probe

Our "High Voltage Probes" portfolio includes passive single-ended probes and active differential probes that can handle voltages up to 6000V (peak). The differential models can be used for measurements in CAT IV environments. The differential probes provide excellent common mode rejection ratio (CMRR) over a wide frequency range. With a bandwidth of up to 200 MHz and excellent CMRR across a wide frequency range, they are ideal for measuring high-speed switching semiconductors. 【Features】 ■ 200 MHz bandwidth and excellent CMRR ■ Measurements with top-class accuracy ■ Offset capability of up to 2000V with top-class vertical axis sensitivity ■ Ease of use and complete integration with Rohde & Schwarz oscilloscopes ■ Measurement of voltages up to 1000V (RMS) with a bandwidth of 500 MHz *For more details, please download the PDF or feel free to contact us.

• probe

We would like to introduce the "Optical Isolation Probe" that we handle. By adding the R&S RT-ZISO isolation probing system, we have expanded our portfolio for high-voltage and high-speed common mode signals. This enables us to support test applications for WBG and high-speed IGBT switch nodes. Various models allow measurements of up to 3000V in CAT III environments. 【Features】 ■ Eliminates the possibility of an electrical return path for common mode signals by using laser communication between the probe head and receiver. ■ Detailed signal measurements with 18-bit vertical resolution. ■ Detailed waveform analysis is also possible with features such as zone triggering and high-speed spectrum measurement. *For more details, please download the PDF or feel free to contact us.

• probe

The "EMC Near-Field Probe" is a product that analyzes EMC issues in electronic circuits and identifies their causes. We offer several types of near-field probe sets. These include electric field probes and magnetic field probes, which can be used with oscilloscopes, signal/spectrum analyzers, and EMI test receivers. 【Features】 ■ A cost-effective solution for the development team to perform EMI debugging directly on the lab bench ■ The ability to display unwanted EMI simultaneously in both time domain and frequency domain, improving debugging efficiency ■ A versatile near-field probe set *For more details, please download the PDF or feel free to contact us.

• probe

We would like to introduce the "Probe-related Accessories" that we handle. We offer a lineup that includes the "Probe Interface Adapter," which allows specific Tektronix TekProbe Interface Level II probes to be used with our oscilloscopes, and the "Probe Positioner," which enables precise and flexible positioning of probes for advanced electronic measurements. Additionally, we have external front ends that achieve the highest signal quality. 【Partial Lineup】 ■R&S RT-Z2T ■R&S RT-ZA29 ■R&S RT-ZAP ■R&S FE44S ■R&S FE50DTR ■R&S FE110SR *For more details, please download the PDF or feel free to contact us.

• probe

The "R&S SMBV100B" is a vector signal generator that is suitable for various types of applications due to its extremely high output power and user-friendly touchscreen operation. With a frequency range of 8 kHz to 6 GHz, it covers all important RF bands in digital wireless communication. Additionally, its wide RF modulation bandwidth of up to 500 MHz meets the challenging requirements of 4G (5G) mobile communication standards. For aerospace and defense applications, its wide bandwidth allows for the generation of complex pulsed signals. 【Features】 ■ Frequency range of 8 kHz to 3 GHz/6 GHz ■ Extremely high output power of up to +34 dBm ■ 500 MHz modulation bandwidth and excellent accuracy ■ Outstanding EVM/ACPR performance even at high power levels ■ Upgrade of the measuring instrument within the facility is possible with software key codes *For more details, please refer to the PDF document or feel free to contact us.

• Signal Generator

■Intuitive operability with a capacitive touch panel ■Large hard keys, hard keys with backlighting, and a low-reflection display enable safe operation whether wearing gloves or at any time of day ■Equipped with a battery that lasts for 8 hours ■Weighs only 2.5 kg (including battery) ■Frequency can be easily expanded with optional additions. No calibration is required after expansion (limited to within the calibration period) 【Application Examples】 ■EMI debugging ■RF design and debugging ■Education and training ■Spectrum monitoring ■Electric field strength measurement ■Signal location ■Testing and maintenance of RF transmitters *For more details, please contact us.

• Other electronic measuring instruments
• Other electric meters

The "R&S FPC" is a spectrum analyzer that offers performance exceeding expectations at a low price. It is designed in Germany to the same quality standards as high-end equipment. With features such as investment protection, high resolution, and easy control, this product is well-suited for use in university laboratories, research institutions, and manufacturing/services. 【Features】 ■ RF performance designed in Germany ■ Bandwidth settings with resolution down to 1 Hz ■ Tracking generator and independent CW signal generator ■ Built-in VSWR bridge ■ 3-year standard warranty *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

The "R&S FPL1000 Signal Spectrum Analyzer" allows for quick and easy measurements. It features excellent RF performance, is lightweight and compact, combining the functionality of a benchtop device with the portability of a handheld unit. In addition to spectrum analysis, it supports accurate power measurements through a power sensor and is capable of analyzing both analog and digital modulation signals. 【Features】 ■ Supports multiple applications with a single instrument ■ Reliable RF performance ■ Intuitive user interface ■ Fully portable ■ Low power consumption *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

The "R&S Cable Rider ZPH" is a cable and antenna analyzer equipped with all the essential measurement functions required for the installation and maintenance of antenna systems in the field. With its unique features, it can perform cable/antenna measurements and spectrum analysis quickly and efficiently. The analyzer is equipped with a touchscreen and a large keypad designed for field use, ensuring excellent operability. 【Features】 ■ High speed ■ Efficiency ■ Standard measurement mode ■ Optional measurement modes ■ Model-specific measurement modes *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

The new R&S SMB100B RF signal generator features uncompromising performance and versatility in a space-saving chassis. In addition to excellent signal purity and high output power, the R&S SMB100B is characterized by a wealth of features and extremely simple operation. It can be used in various applications in research and development, manufacturing, service, and maintenance, making it particularly suitable for applications where cost performance is emphasized. 【Features】 ■ Frequency range of 8 kHz to 1 GHz, 3 GHz, or 6 GHz ■ Excellent SSB phase noise: -134 dBc (measured value) (1 GHz, offset 20 kHz) ■ Extremely low wideband noise: -153 dBc (typical value) (15 MHz < f ≤ 6 GHz, offset 30 MHz) ■ Ultra-high output power: 34 dBm (measured value) (1 GHz) ■ Compact design: 2 HU, ¾ 19-inch width ■ State-of-the-art large 5-inch touchscreen GUI *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Signal Generator

The "R&S RTP" is a high-performance oscilloscope that, thanks to its customized front-end ASIC and real-time processing hardware, can perform extremely accurate measurements at unprecedented speeds while maintaining a compact form factor. This product achieves high-class signal integrity and high capture rates. With front-end components designed by Rohde & Schwarz, it realizes an expandable oscilloscope platform ranging from 4GHz to 8GHz. 【Features】 ■ Real-time signal integrity ■ Functions of multiple measuring instruments ■ Compact and flexible setup ■ Comprehensive probe portfolio *For more details, please refer to the PDF materials or feel free to contact us.

• oscilloscope

The "R&S ZNL" is a highly versatile universal measuring instrument that condenses vector network analysis measurements, spectrum analysis measurements, and power meter measurements into a single compact unit. It offers a frequency range of 5 kHz to 3 GHz or 6 GHz, making it suitable for various RF component measurement applications in industrial electronics and wireless communications. 【Features】 ■ Excellent RF performance ■ A variety of functions for production and laboratory use, including support for calibration units ■ Improved operability with an easy-to-understand menu structure ■ User-friendly 10.1-inch large display ■ Portable for use anywhere *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

The R&S ZNLE is an economy-class network analyzer equipped with a standard 2-port S-parameter test set. This model achieves remarkable RF performance, boasting a dynamic range of 120 dB and a trace noise of 0.001 dB, reaching class-leading levels. Furthermore, it offers measurement speeds that are approximately 10 times faster compared to models in the same class.

• Logic Analyzer

The "R&S ZNA Vector Network Analyzer" is equipped with excellent RF characteristics and a unique hardware architecture, making it easier than ever to perform demanding measurements. A DUT-oriented operating concept has been newly introduced, allowing for quick and easy execution of the necessary measurement setups. Additionally, the two independent touch screens enhance flexibility, enabling smooth and efficient operation. 【Features】 ■ Four phase-coherent built-in signal sources ■ Two built-in local oscillators for the receiver ■ Eight truly parallel measurement receivers ■ Four built-in pulse modulators ■ Mixer phase measurement that does not require a reference mixer *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

The "R&S NRP Power Meter Series" enables highly reliable power measurements. The components of this series, including the R&S NRX base unit, R&S NRPV virtual power meter PC software, and a comprehensive portfolio of USB and LAN power sensors, all possess these characteristics. They are suitable not only for use in manufacturing, research and development, and calibration labs but also for installation and maintenance tasks. 【Features】 ■ High cost performance and compact design ■ A comprehensive portfolio for power measurements from DC to 110 GHz, -70 dBm to +45 dBm ■ Achieves a dynamic range of up to 93 dB with 3-path diode power sensors ■ Accurate analysis of envelope power using wideband power sensors ■ High precision with thermal power sensors *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

The "R&S NRQ6" is a frequency-selective power sensor that combines the accuracy of a power meter with the dynamic range of a spectrum analyzer. It performs extremely accurate and fast power measurements down to -130 dBm. In addition to conventional continuous average measurements, it features a trace display function and can also perform ACLR measurements, which are common in mobile communication applications. 【Features】 ■ Frequency-selective power measurement ■ Frequency range: 50 MHz to 6 GHz ■ Power measurement range: -130 dBm to +20 dBm ■ Automatic frequency/bandwidth detection ■ Measurement bandwidth of 100 MHz *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The excellent measurement accuracy and speed of the R&S NRP power sensors have been widely recognized over many years. The R&S NRPxxS(N), R&S NRPxxT(N), and R&S NRPxxA(N) power sensors take power measurement to the next level. This device supports USB and can also be controlled via LAN. As a result, the R&S NRP power meter portfolio is unique in the industry. Key Features ❙❙ Maximum dynamic range: -70 dBm to +45 dBm ❙❙ Frequency range: DC to 110 GHz ❙❙ Readings: over 50,000 times per second ❙❙ Flexible operation with R&S NRP main unit, laptop/PC, and numerous devices from Rohde & Schwarz ❙❙ Control and monitoring via LAN and USB ❙❙ Easy LAN operation via web browser ❙❙ R&S NRPxxS(N) with the widest dynamic range ❙❙ R&S NRPxxT(N) with the highest accuracy ❙❙ R&S NRPxxA(N) suitable for EMC applications

• Sensors

The R&S NGU Source Measure Unit (SMU), with extremely high accuracy and short transient response times, is ideal for tackling challenging applications. Its specialized current meter design allows for accurate measurement of current drains from nA to A in a single sweep, eliminating the need for multiple measurement sweeps. With a short recovery time, it can handle fast load variations that occur, for example, when mobile communication devices switch from sleep mode to transmission mode. High-speed data collection detects every detail with a minimum resolution of 2 μs. The R&S NGU Source Measure Unit can function as both a source and a sink when simulating batteries and loads, thanks to its adoption of 2-quadrant or 4-quadrant architecture.

• Power Supplies

The R&S NGM200 power supply, with high precision and short recovery time under load, is ideal for challenging applications. By adopting a two-quadrant architecture, it can function as both a source and a sink when simulating batteries and loads. Its short response time allows it to handle rapid load changes that occur, for example, when mobile communication devices switch from sleep mode to transmit mode. High-speed data capture and useful battery simulation capabilities expand the range of applications.

• Power Supplies

The R&S NGP800 DC power supply series includes five models of 400 W or 800 W, providing maximum power at various operating points. Two or four 200 W outputs can supply up to 64 V or up to 20 A per output. Electrically equivalent, galvanically isolated outputs can be connected in series or parallel to supply up to 250 V or 80 A.

• Power Supplies

R&S ESW offers three models that cover frequency ranges from 2 Hz to 8 GHz / 26.5 GHz / 44 GHz. It also comes standard with high-speed FFT time-domain scanning that fully complies with CISPR16-1-1. By using time-domain scanning, parallel measurements with two types of CISPR detectors are possible. Additionally, various measurement modes such as spectrogram function, real-time spectrum analysis, and IF analysis can be utilized. The spectrogram function continuously displays the analyzed spectrum against time, allowing for the visualization of rapidly changing interference signals. Furthermore, the real-time spectrum analysis has an 80 MHz real-time bandwidth, and by combining it with afterglow display mode and frequency mask trigger functions, it becomes easy to capture noise signals hidden beneath major signals.

• EMC Testing

The R&S SMA100B from Rohde & Schwarz Japan is an RF/microwave signal generator equipped with the necessary features for high-frequency design testing environments. It allows you to select signal quality according to your application and offers three types of output level ranges. Furthermore, it meets advanced testing needs with features such as a clock synthesizer, digital ALC, SCPI recorder, and emulation mode. 【Features】 ■ Ability to select signal quality according to application ■ Offers three types of output level ranges ■ Standard equipped with a harmonic filter that balances high output and harmonic suppression ■ All models come with an electronic attenuator ■ Meets advanced testing needs *For more details, please refer to the PDF document or feel free to contact us.

• Signal Generator
• Other electronic measuring instruments

The "R&S NGL200 DC Power Supply Series" is suitable for challenging applications due to its high accuracy and short transient response time. By adopting a two-quadrant architecture, it can function as both a source and a sink when simulating batteries and loads. With a short transient response time, it can handle rapid load changes that occur, for example, when mobile communication devices switch from sleep mode to transmission mode. 【Features】 ■ High accuracy source/sink ■ Technology for very challenging tasks ■ Easy operation ■ Suitable for use in labs and test systems *For more details, please refer to the PDF document or feel free to contact us.

• power supply

During the development of new products, valuable time is lost due to sporadic errors. In the oscilloscope's memory, the memory length for analyzing errors or error history is typically limited to a few milliseconds. This issue can be resolved with large-capacity segment memory and dedicated trigger conditions, allowing for the capture of relevant sequences without long pauses. 【Electronic Measurement Solutions】 ■ Single Shot ■ Limit collection to active signal elements ■ History and Segment Memory ■ Easy to set up, with results obtainable in a short time *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• oscilloscope

Verification of True Jitter Performance of Clocks in High-Speed Digital Design The "R&S FSWP" provides the necessary features for testing low-jitter clocks in both SSC OFF and SSC ON modes. In addition to very high AM suppression in phase noise measurements, it offers excellent phase noise sensitivity required for accurate jitter measurements in low-jitter clocks for high-speed digital designs. 【Electronic Measurement Solutions】 ■ Measurement of phase noise ■ Weighted phase noise based on the corresponding system transfer function ■ Integration of weighted phase noise over the defined jitter integration range *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Signal Generator

The R&S RT-ZPR20 active power rail probe is designed to measure the characteristics of small AC signals on DC rails. With the increasing demands on power distribution circuits, DC rails are becoming more compact, and rails that ensure clean power delivery to IC pins are starting to become widespread. 【Electronic Measurement Solution (R&S RT-ZPR20)】 ■ The probe has a 1:1 attenuation ratio, resulting in only a 10% increase in noise. ■ By effectively utilizing the ADC bit count of the oscilloscope, it is possible to increase measurement accuracy. ■ Capable of capturing high-frequency transient signals and coupled signals up to 2.4 GHz. ■ Minimizes the impact on the rail signals being measured. ■ Simultaneously displays the DC values of each power rail with a DC accuracy of 0.05%. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• oscilloscope
• probe

The R&S Cable Rider ZPH is a simple one-port cable and antenna analyzer that allows for quick and easy reflection measurements and other tasks. By reducing time and errors in the field, it helps save operational costs and minimize downtime. 【Electronic Measurement Solutions】 <R&S Cable Rider> ■ Designed for fast and efficient measurement of antenna systems ■ Provides accurate results in one go ■ Supports essential measurements for the deployment/maintenance of wireless transmission links in the field ■ Enables quick initiation of measurements ■ Prevents incorrect measurements and wrong parameter inputs in the field *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Due to signal defects or abnormalities, malfunctions may occur in electrical/electronic systems. Especially in the field, these errors can lead to system downtime and increased costs. Therefore, it is important to quickly and efficiently identify errors and determine their causes. The R&S Scope Rider is a handheld oscilloscope that combines excellent performance based on high safety standards with the debugging capabilities of a benchtop oscilloscope. 【Applications】 ■ Rapid detection of low-frequency signal defects ■ Accurate defect detection through a powerful triggering system ■ History function: Analyze by going back in time ■ Mask test to clarify signal deviations ■ Data logger: Long-term debugging power *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• oscilloscope

This application note explains how to use a harmonic mixer in conjunction with Rohde & Schwarz signal/spectrum analyzers. It also focuses on the use of the conversion loss tables that come with each Rohde & Schwarz analyzer. Additionally, it includes tools for converting the format of the conversion loss tables. [Contents (Excerpt)] ■ Use of harmonic mixers for frequency range extension - Operation of harmonic mixers and spectrum analyzers - Local oscillator and IF frequencies of various spectrum analyzer families - Support for 3-port and 2-port mixers - Signal identification (image suppression), etc. *For more details, please refer to the PDF document or feel free to contact us.

• Signal Generator

The debugging measurement device must be equipped with insulated input channels to perform dangerous high-voltage measurements. Additionally, the optional digital channels support digital signal analysis, and the trigger and decode functions are suitable solutions for monitoring the time correlation of communication interfaces based on serial protocols. 【Applications】 ■Embedded power supplies ■Evaluation of embedded AC/DC power supplies ■Configuration of R&S Scope Rider *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• oscilloscope

The R&S SMW200A vector signal generator allows for easy import of scattering parameters of active/passive 2-port interconnection networks via s2p files. Combined with excellent real-time baseband performance, it is an ideal product for high-precision RF and microwave testing that requires de-embedding of the device under test (DUT). 【Features】 <R&S SMW200A vector signal generator equipped with the R&S SMW-K544 option> ■ Vector-modulated RF and microwave signals with excellent frequency response flatness ■ Import of s2p files characterizing 2-port interconnection networks ■ Real-time DUT de-embedding using optional absolute RF level correction *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Signal Generator