Kistler Japan G.K. List of Products and Services

A handheld pressure sensor equipped with three crystal piezoelectric thin-film force sensors. The central part of the sensor is significantly recessed, resulting in a small distance between the electrodes, and it is insulated, so it will not be damaged even when powered. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Minimum electrode distance: 3.0 mm • Replaceable electrodes compatible with various shapes • The sensor unit can be handled flexibly, allowing for safe operation • Calibrated measurement ranges (5 kN, 10 kN, 45 kN) • Excellent repeatability achieved through electrode centering

• Other processing machines
• Other industrial robots
• Other measurement, recording and measuring instruments

Using this multi-component force sensor kit, you can easily create a multi-component force plate. The size of the force plate to be assembled can be freely selected from a wide range of options. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊ ・For the production of multi-component force plates ・Easy to install ・High reliability ・No recalibration required

• Other measurement, recording and measuring instruments

This strain sensor can measure dynamic and quasi-static forces generated by fixed or moving machinery. It is highly sensitive and features acceleration compensation, making it suitable for process monitoring of rapidly moving machinery (e.g., press machines, automatic assembly machines). －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・Extremely high sensitivity ・Very low acceleration sensitivity, ideal for measurements on moving parts ・Compatible with tension and compression force measurements ・Excellent overload capacity ・Protection rating IP65 (when using dedicated cables)

• Other processing machines
• Other measurement, recording and measuring instruments

The Mini Smart Torque Converter Model 4502A uses strain gauge technology to transmit analog output data of 0 to ±5VDC non-contact. It also has built-in output for rotational angle and speed. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Built-in measurement circuit • Accurate output signal ±5VDC (Electrical insulation from power supply and measurement signal) • Non-contact data transmission • Single-pole power supply • Standard connection methods: - 1/4” hex socket (DIN3216) - Square socket (size depends on rated torque) - Round shaft • Rotational angle measurement (optional)

• Torque Meter

The torque converter model 4503B is a strain gauge type torque converter equipped with a built-in rotation angle sensor. It features digital signal processing for measurement and can output both analog and digital signals. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • High response 10kHz (frequency response) • Maximum rotation speed 50,000 rpm • Accuracy grade: First range: 0.05, Second range: 0.1 • Dual range (second range): 20% or 10% of FS • Up to 8,192 pulses per rotation • Torque signal is output serially via RS-232C ＋Advantages of Dual Range＋ • Protection from overload • Two calibration points with one sensor

• Torque Meter
• Other measurement, recording and measuring instruments

The Basic Line Torque Converter Model 4520A uses strain gauge technology to transmit analog output data of 0 to ±10VDC non-contact. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Rated torque 1 to 1,000 N·m • Maximum rotational speed 10,000 rpm • High frequency response • Maintenance-free (non-contact) • Round shaft at both ends • Includes rotational speed measurement • Cost-effective (compared to our same series)

• Torque Meter

The CoMo Torque 4700B, a dedicated indicator for torque converters, is ideal for industrial and research and development applications. It can be directly connected to voltage output or frequency output type strain gauge torque converters with built-in amplifiers. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Accurately displays measurements such as torque, speed, rotation angle, force, and output • 4x20 character display • Operation via menu screen • High measurement accuracy < 0.05% • High-speed sampling frequency up to 10 kHz • Low-pass filter (cut-off frequency 0.1 to 1 kHz) • Can store up to 5,000 measurements per channel • Maximum/minimum memory and limit value monitoring available • Operable from a PC via USB or RS-232C • Analog output

• Torque Meter
• Other measurement, recording and measuring instruments

The crystal piezoelectric reaction torque sensor is easy to install and measures dynamically changing torque on a non-rotating axis. Five sizes are available, with measurement ranges of ±1N·m, ±10N·m, ±25N·m, ±200N·m, and ±1,000N·m. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Two calibration ranges (100%, 10%) • Compact and easy to install • Flexible mounting using screws on flanges at both ends • Optimal torque measurement enabled by centering ring • Through-type structure for shaft passage • Can also be used as a calibration sensor

• Torque Meter
• Other measurement, recording and measuring instruments

This piezoelectric two-component torque sensor is easy to install and simultaneously measures tensile/compressive force (Fz) and torque (Mz). Its high resolution allows it to capture slight dynamic changes. It is ideal for measuring tensile/compressive forces and torque on non-rotating axes. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • High rigidity and high natural frequency • Compact • Easy installation with various connections possible via upper and lower flanges • Accurate torque measurement through coaxial connection with centering rings • Hollow structure allows for shaft penetration

• Torque Meter
• Other measurement, recording and measuring instruments

maXYmos TL is a unit that displays two interrelated measurements as waveforms on an X-Y diagram and monitors the manufacturing process based on those waveforms. It is also capable of displaying sensor signals as waveforms over time and monitoring based on those waveforms. maXYmos TL comes with numerous criteria (thresholds) for judgment, enabling in-process monitoring that caters to various manufacturing processes. 【Features】 - Built-in amplifiers for piezoelectric and strain gauge sensors - Supports encoder signals - Display and operation via a 10.4-inch touch panel color display - Offers many criteria (thresholds) for pass/fail judgment - Allows setting of up to 10 pass/fail criteria - Can connect up to 8 monitoring modules to a single display module - Compatible with CC-Link

• Other assembly machines

maXYmos NC is a system that uses Kistler's servo press to control, monitor, evaluate, and digitize the joining and pressing processes. It displays the relationship between displacement values and load values as waveforms. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Up to 128 independent judgment programs can be created • Each program can accommodate up to 10 different types of judgment criteria for online/offline use • Equipped with sequence control functions (sequencer) to ensure maximum flexibility • Achieves high-speed real-time communication with servo drives via the SERCOS III communication standard • Equipped with a rich variety of fieldbus interfaces for system control (PROFIBUS, PROFINET, EtherCAT, EtherNet/IP) • Historical data for analyzing the causes of NG judgments for the last 500 cycles • Statistical processing and digitization of measurement results (Q-DAS, CSV, PDF, XML)

• Process Control System
• Other process controls
• Other assembly machines

The multi-component small power meter model 9119AA1 measures three orthogonal components of force and enables the measurement of extremely small forces due to its high resolution and sensitivity. ◇ Measurement range: ±4kN, Top plate: 39x80mm (9119AA1) / 55x80mm (9119AA2) －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Compact design • High sensitivity and natural frequency • Minimal temperature influence • Titanium top plate • Cutting force measurement in ultra-precision machining • Multi-component force measurement

• Other measurement, recording and measuring instruments

A fixed cutting dynamometer capable of calculating three-component forces and three-component moments during cutting and grinding processes. Its compact design and large measurement range make it suitable for installation in spaces with limited room. ◇ Measurement range: ±10kN, Top plate: 90x105mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・ Compact design ・ Large measurement range ・ Minimal temperature influence ・ Ideal for cutting force measurement ・ Suitable for multi-component measurement

• Other measurement, recording and measuring instruments

The multi-component dynamometer model 9139AA measures three orthogonal components of force. Its robust and high-rigidity design allows for a wide measurement range, making it capable of high-load measurements. ◇ Measurement range: ±30kN, Top plate: 140x190mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Wide measurement range • Temperature compensation design (patented) • Compact and sturdy design • High natural frequency

• Other measurement, recording and measuring instruments

This quartz piezoelectric three-component dynamometer can measure the three orthogonal components of force. It features a high-stiffness structure with a high natural frequency. Additionally, due to its high resolution, it can measure even slight dynamic changes in large forces. ◇ Measurement range: -10 to 60 kN, Top plate: 260x260 mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Wide measurement range • Suitable for high-durability applications

• Other measurement, recording and measuring instruments

A fixed cutting dynamometer that can measure orthogonal three-component forces during cutting and grinding processes. It is ideal for optimizing cutting conditions and monitoring cutting states. Despite its wide measurement range (Fx, Fy, Fz: ±5 kN), it has excellent dynamic resolution (0.01 N), allowing for the measurement of very small dynamic changes in force even when large forces are acting. ◇ Measurement range: ±5 kN, top plate: 100x170 mm

• Other measurement, recording and measuring instruments

This 4-component dynamometer can measure the orthogonal three components of torque and force generated around the axis of the dynamometer. It features a high-rigidity structure with a high natural frequency. Additionally, due to its high resolution, it can measure even slight dynamic changes in large forces or torques. ◇ Measurement range: ±5kN/±200Nm, Top plate: Φ100 －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・Compact, robust multi-component force measurement device ・Versatile ・For measuring cutting forces and grinding forces during drilling, milling, turning, and grinding operations.

• Other measurement, recording and measuring instruments
• Torque Meter

This DAQ system is versatile and serves as a data acquisition system for controlling interfaces and charge amplifiers. It is suitable for force measurement using single-component or multi-component force sensors, in addition to cutting power meters. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Easy installation using USB 2.0 port • Remote control of charge amplifiers • Powerful data acquisition system • High sampling rate • Trigger function

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

Kistler DynoWare is software specialized in measuring cutting resistance and grinding resistance. In addition to its simple operability, it excels in creating visual reports with its diverse graphic functions. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Easy operation • Easy setup and control of Kistler measuring instruments • Signal evaluation and calculation functions • The A/D converter can process up to 28 channels (DynoWare software supports up to 8 channel charge amplifiers) • Diverse graph display functions

• Other measurement, recording and measuring instruments

The low-pressure sensor measures dynamic pressure and short-term static pressure from vacuum up to 10 bar. It is characterized by a high resonance frequency and high resolution. The charge signal generated by the sensor is converted into an output voltage proportional to the charge by a charge amplifier. The output voltage is not affected by the length of the cable connecting the sensor and the charge amplifier. The output of the charge amplifier is ±10V. The output of sensor 7261 reaches a maximum sensitivity of 0.001 bar/V.

• Pressure

The 601C series piezoelectric pressure sensor is compact and highly sensitive, making it suitable for measuring very small pressure fluctuations. Additionally, its diaphragm structure ensures accurate dynamic pressure measurements even when exposed to high temperatures. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Pressure measurement range: 0 to 250 bar (3,626 psi) • High sensitivity • Optimization of thermal transients via diaphragm • Compact size • High responsiveness and high natural frequency • Very wide operating temperature range • Charge (PE) or voltage (IEPE) output

• Pressure

The pressure sensor 603C can measure dynamic pressure in a range of up to 1,000 bar. It is characterized by its very small size and high natural frequency. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・Ultra-compact ・Usable up to 200℃

• Pressure

This high-pressure pressure sensor uses a front seal method and can measure explosion pressure and hydraulic pressure up to a maximum of 10,000 bar. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Extremely long lifespan • Good long-term stability • Excellent linearity

• Pressure

This high-pressure pressure sensor is suitable for measuring explosion pressures up to 6,000 bar with a front seal design. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • NATO standard sensor • Extremely long lifespan • Long-term stability

• Pressure

This piezoelectric high-pressure pressure sensor is suitable for pressure measurements up to 2,000 bar with a front seal design. It performs highly accurate measurements in harsh environments such as high-impact combustion particles and high-temperature gases. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • High sensitivity –13 pC/bar • Front seal design • Long-term stability • Extremely long lifespan • Acceleration compensation • Connector (standard): Kistler KIAG 10-32 • Connector (optional): BNC and TNC

• Pressure

The piezoresistive absolute pressure sensor 4007D...DS with M5x0.5 mounting screws is a sensor that can measure up to 200°C and can be installed in small spaces. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Compact (M5×0.5), lightweight • Low acceleration sensitivity and high natural frequency • Small thermal shock error due to digital temperature compensation

• Pressure
• Other measurement, recording and measuring instruments

This is a quartz piezoelectric sensor that measures quasi-static and dynamic compressive forces in the mega-newton range, developed for measuring the compressive force of large industrial press machines. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • A very wide measurement range capable of measuring compressive forces from kilonewtons to mega-newtons • Calibration at 10% intervals of the measurement range (FS) as standard • High overload capacity • Manual operation is also possible • A variety of options for optimal installation and accurate loading

• Press Dies
• Calibration and repair
• Sensors

This sensor is designed for precise measurement of static and dynamic pressure vibrations, suitable for absolute pressure measurement from 0 to 2 bar and from 0 to 500 bar. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Temperature compensated measurement range: ‒20 to 50 °C / 20 to 120 °C • Option to choose between standard type and PiezoSmart type with TEDS functionality • Ideal for gas exchange analysis in internal combustion engines • Isolated from the medium by a steel diaphragm, providing excellent compatibility • High overload capacity • High natural frequency

• Pressure
• Other measurement, recording and measuring instruments