Industry's smallest finger size
Features of HPH-12 1) It is ultra-compact and can heat a point of φ1.5 to 750–800°C. The control of heating temperature can be done through irradiation time control or voltage control. The lamp life will be reduced to one-third, but high-frequency flashing operation will decrease the lifespan. Slow ramp-up and ramp-down of voltage can improve lifespan. 2) It achieves perfect clean heating and can also heat in clean rooms or vacuum environments. Note that when placed in a vacuum chamber, there will be some gas release from inorganic adhesives initially, so pre-vacuum treatment is necessary. Additionally, heat dissipation decreases in a vacuum, so a water cooling unit must be installed in the main body. 3) It has made it possible to heat in narrow spaces that could only be addressed by optical fibers or lasers in the past. Compared to fiber optic heating and laser heating methods, it offers overwhelming efficiency of over 10 times, lower cost, energy savings, and safety. 4) There are no restrictions on the direction of lighting, allowing for use while moving. It consists of a high-efficiency condenser lens with a front protective glass and a lamp unit, both of which can be replaced. For continuous lighting, please install the air cooling unit ACU-8.
Inquire About This Product
basic information
Outer diameter Φ12 Focal length 6mm Focal diameter Φ1.5 Voltage DC12V Power 20W
Price range
Delivery Time
Applications/Examples of results
Drying of printed matter Precision inspection of solar panels Synthesis of CFRP within the nozzle Heating processing of dual-arm robots
Detailed information
-
Drying of Printing Summary: Drying of printed circuit board printing using the Halogen Point Heater HPH-12 Product Name: Halogen Point Heater HPH-12 Industry/Process: Electronic components, printed circuit board manufacturing Application Category: Drying of printing On-site Issue: If drying is insufficient and the process moves to the next step, ink may adhere to transport rollers and inspection jigs, causing contamination in other areas. Why It Occurs: The drying speed and fixation state of the ink fluctuate slightly. Problems with Conventional Methods: When the solvent of the ink fills the drying oven, drying efficiency decreases, leading to unpleasant odors and resin adhesion to the oven walls. Solution: Use the Halogen Point Heater HPH-12 to efficiently heat the ink areas of the board in a short time. Reason for Product Suitability: Prevents "ink transfer and peeling due to insufficient drying." Implementation Effect: Eliminated ink transfer, smudging, board warping, and deterioration of electronic components. Comparison: In locations where heat-sensitive precision parts are gathered, the ability to spot-dry moisture and solvents in just a few seconds makes it the top-class solution that covers all conventional weaknesses. Link to Product Site: https://www.heat-tech.biz/products-hph/hph-ss/16494.html
-
Precision Inspection of Solar Panels (Photovoltaic Modules) Precision inspection of solar panels (photovoltaic modules) using the Halogen Point Heater HPH-12 Halogen Point Heater HPH-12 Solar Panels (Photovoltaic Modules) Evaluation of Photovoltaic Cells and Photocatalysts High-quality performance was required to increase power generation efficiency. Microcracks, cold solder joints, voids EL inspection cannot detect variations in power generation Defects in solar panels could be inspected with pinpoint accuracy. Non-contact high-speed inspection was possible due to the use of halogen light. Moreover, a simple mechanism could be used because a DC 12V power supply was utilized. Absolute numerical values indicating the percentage decrease in conversion efficiency can be extracted. Link to product description site: https://www.heat-tech.biz/products-hph/hph-ss/16494.html
-
Synthesis of CFRP inside the nozzle Using the Halogen Point Heater HPH-18 to synthesize CFRP inside the nozzle Halogen Point Heater HPH-18 3D printer industry Additive manufacturing, injection molding There was no small high-temperature heating device To perform additive manufacturing with a 3D printer The heating device was large Using the Halogen Point Heater HPH-18 to synthesize CFRP inside the nozzle It can be heated to high temperatures at pinpoint accuracy, allowing synthesis inside the nozzle Being compact, the installation of the equipment was flexible. Furthermore, since it uses non-contact heating, maintenance is easy Outer diameter dimension is φ12 Link to product description site: https://www.heat-tech.biz/products-hph/hph-ss/16494.html
-
Heating Processing of Dual-Arm Robots Using the Halogen Point Heater HPH-12 for heating processing on dual-arm robots Halogen Point Heater HPH-12 Robot Engineering Pinpoint Heating Heating processing on dual-arm robots Physical AI Integration There were no compact heaters available for installation on dual-arm robots. Using the Halogen Point Heater HPH-12 for heating processing on dual-arm robots With a total length of 95mm, it is finger-sized and can be handled easily There is no risk of decreased judgment or mistakes due to fatigue Operable 24 hours a day, 365 days a year Link to product description site: https://www.heat-tech.biz/products-hph/hph-ss/16494.html
catalog（1）
Download All Catalogs
Company information
5 reasons that HEATTECH is selected 1. The rich selection of 5 principles and 71 types. Air Blow heater , Near-infrared, Middle-infrared, Far-infrared, and UV heater From the 71 types of products based on the 5 principles of heating system, we will propose the best heater. 2. 9 series 88 types of heater controllers． Manual, Automatic, Speed proportional, Remote control, IOT compliant, Noncontact heating control, One-shot heating, Multistage heating, etc. We propose the optimal heater controller from the multifunctional products. 3. Construction method study materials We have published a number of technical documentation online seminars. 4. Sense of security of verification before introduction. Test piece, test laboratory, in user can verify before introduction. 5. Low-budget one-stop introduction To introduce in testing way, the laboratory kit which gathered something necessary was prepared. : Member of the Kobe Chamber of Commerce and Industry : Member of the Society of Material Science Japan : Member of the Society of Thermophysical Properties Japan : Member of the Japan External Trade Organization Trade Tie-up Promotion Program
