Supports high-frequency bands up to 145GHz in a board-mounted state with a 0.8mm connector! High-performance end-launch type connector.
We will organize the differences in heating methods between microwave and high-frequency dielectric heating, and introduce specific practical examples of processes where these technologies are applied!
Introduction of case studies for equipment using high frequency.
This is a series of coaxial attenuators (attenuators) and terminations (terminators) that support frequencies up to 6GHz and power levels of 25W, 50W, 100W, and 200W.
High-performance microcontroller equipped with RISC-V, strong in image and audio processing" - "A license-free choice that will change your company's future.
Obtained waterproof and dustproof specification IP66 GPS radome antenna
Energy-saving! Low-temperature drying! No material alteration! A microwave vacuum drying device that enables rapid drying and concentration at low temperatures.
3700 Passive Hydrogen Maser: A highly precise frequency oscillator utilizing the maser radiation of hydrogen gas.
Widely adopted in various radar, electronic warfare, communication equipment, security devices, and defense equipment.
It is designed to minimize the loss of transmitter output and receiver input.
We utilize thin-film processes for the design and manufacturing of high-performance passive electronic components. Excellent return loss characteristics in RF signals.
Our original high-sensitivity dual-frequency receiver.
Substrate mounting (pin), lead wire, low-profile type, and various types available for custom design.
RF high power coaxial switch (Coaxial Switch) DPDT/Transfer type
The workpiece hardening quality is stabilized by the workpiece self-driving prevention mechanism! The stroke can be adjusted according to the workpiece.
For replacing coaxial cables! Easily convert all types of radio waves such as TV/radio broadcasts, mobile, GPS, and satellite signals into light right under the antenna for simple optical transmission!
Engineering plastic with excellent stable dielectric properties over a wide frequency range.
Safety mechanism linked to temperature and pressure sensors! Introduction to the microwave synthesis device.
Introduction of case studies for equipment using high frequency.
Introducing 5G experimental solutions using Mini-Circuits products.
By directly providing vias on the pitch pad, we contribute to the high-density implementation of FPC.
ND Satcom has over 30 years of experience in ground station applications for satellite communications and has delivered to more than 150 customers worldwide.
Enables long-distance communication, eliminates the need for EMI filters, RFI filters, and EMP from the design, achieving weight reduction.
This is a compact and portable electromagnetic wave measuring device (gauss meter).
Introduction to fixed attenuators for level adjustment of high-frequency signals and improvement of transmission system characteristics!
Custom production is also possible! Introducing an impedance transformer with good high-frequency characteristics over a wide bandwidth.
●Fine circuit pattern Line/Space: 30μm/30μm ●Pattern dimension accuracy: ±10μm
We will provide you with the best products. We look forward to your inquiries.
Ultra-small (13 x 15 mm), low power consumption
Started selling MMIC Evaluation Boards that can be designed with the fastest and shortest delivery times.
Design strong against condensation and dust environments! Can be used for surface modification of printed circuit boards and semiconductor wafers.
It is possible to continuously heat and dry granular materials and powders while stirring.
What is the difference between dielectric heating and induction heating?
Millimeter wave component compatible! Introducing high-frequency components handled by TSS Japan.
Save implementation area and reduce costs during mass production!
A size that fits comfortably in your hand and is easy to use! Effectively removes dust and dirt even with dry wiping.
A phase adjustment fixture that combines two conventional line stretchers into a componentized form.
A series of coaxial attenuators compatible with a wide range of microwave to millimeter wave standards.
Two-layer silicone gasket. Achieves high noise shielding effect due to the adhesion properties of its hollow shape. *Samples and a glossary for the electronics industry are currently available!
Even when compressed repeatedly, it does not lose its shape! It is a two-layer extruded product that integrates the outer layer and the sponge core material.
Introducing a clip-type gasket that creates a high level of adhesion!
Pin type, compact, lead wire, low profile, vertical custom design available.
Pin type, compact, lead wire, low profile, vertical type, custom design available.
You can safely use 5G communication with products that have been certified for radio wave technical standards in Japan and have been certified for IoT by major telecommunications carriers!
A substrate for millimeter-wave radar that suppresses transmission loss and prevents collisions.
Conversion to the required frequency band is possible. Custom solutions are available. Domestic processing can be accommodated, even for small quantities!
A/D 12-bit x 2 channels at 1 ms, A/D 12-bit x 8 channels at 2 ms, wireless transmission.
Predicting EMC behavior in the early design stage to comply with standards!
Domestic technical compliance + compact + easy, and we also have a wide range of new products with built-in RISC-V!
Advanced cryptographic communication technology. Uses pseudo-random noise codes that no one knows, enhancing security for both wired and wireless communications. It's the optimal choice!
Maintaining high reliability with gold-plated contacts.
Compact and compatible with high-frequency signals, high-frequency compatible DC up to 1.0GHz.
【Waterproof (IPX7)】Made in Japan compatible product! Waterproof with two mountains + EMC measures! Conductive, heat-resistant, waterproof silicone gasket!
We offer a variety of products including RF fixed coaxial attenuators, digital attenuators, voltage attenuators, and waveguide attenuators.
Non-hygroscopic substrate with a high dielectric strength of 200V/m! Optional FlexSorb coating available!
￥45,000 (excluding tax) 400–6000MHz 150W -160dBc low PIM (passive IM) termination
New product ¥45,500 excluding tax unit price DC-67GHz 1.0mm coaxial adapter
[In Development] This is a manufacturing method that reduces materials, processes, energy, and waste in conventional construction methods, contributing to environmental protection through decarbonization.
Protection level is IP65! Introducing a microwave powder flow detector!
A state-of-the-art device for high-precision, fully automated measurement of the frequency characteristics of high-speed transmission boards.
Leave it to us for original high-frequency components, oscillation coils, and high-frequency measuring instruments.
High quality at a lower price than market value! Instant delivery sales of fixed dampers / Online shop launched.
Significant cost reduction compared to market prices through improvements in the manufacturing process! Introducing high-quality fixed dampers.
Cable with armor clamp specifications, considering stability against bending for microwave and millimeter wave compatibility!
50W (DC) ~ 8GHz N-type coaxial attenuator 3/6/10/20/30dB
Low Profile Low PIM Coaxial Connectors Suitable for Compact and Space-Saving Applications
Forming an outer conductor that does not develop wrinkles even when bent! A flexible waveguide incorporating traditional braiding techniques.
We provide total engineering for the development, design, and manufacturing of FA products and systems.
Introducing new energy in industries such as food processing, electronics, advanced medical care, and pharmaceuticals!
The thinning of flexible substrates is effective for assembly in narrow spaces! Required in areas where low spring back and high bending flexibility are needed.
Tailoring for customers, high-quality and reasonably priced precision micro products.
Explaining key points to keep in mind when renovating or newly installing heat treatment equipment! Detailed explanations on heat treatment plans, pre-production trials, utilities, and more.
Adopted in civil machinery, automobiles, and the military field! The keywords are "high output," "broadband," and "low power consumption."
Industry first! RF power amplifier with 750W output from 1GHz to 6GHz. "High output," "broadband," "low power consumption."
![nacc_logo[1].jpg](https://image.mono.ipros.com/public/product/image/2be/2000438965/IPROS20601913614149527208.jpeg?w=280&h=280)
Comprehensive Guide to Japan Automatic Control
We handle a wide range of products including various boards for aerospace and space applications, SSDs, electronic components, mechanical parts, microwave products, aviation-related items, and network products.
We handle a wide range of products including various boards, SSDs, electronic components, mechanical parts, microwave items, aerospace-related products, and network products.