Turn your dreams into reality! We provide a comprehensive service from design and planning of resin products to prototyping, management, and quality assurance.
[Test molding with demo machine for small diameter balls Φ1.0 to Φ15.0, small lot sample support available]
Newly introduced with a compact and lightweight design! Perfect for mold training.
120ppm high concentration compatible" "Generates 6 liters per minute" "Low running cost" "Super compact" "No installation required" "Subsidy available" "Leasing OK
Leave any color to us! Small quantity, short delivery time color matching service.
Proposal of recommended design through fluid analysis and structural analysis! Accepting orders from 1 piece (prototype) to mass production.
With mold processing equipment, cavity machining, aspheric machining, and freeform surface machining are all possible!
By rotating the processing surface, there are no uneven areas, and the processing time is reduced to a maximum of one-tenth! Surface roughness (Ra) of 1 to 3 nm, and free-form processing is possible up to a maximum diameter of 700 mm.
Even in small quantities, achieve stable performance as targeted. Introducing the support technology developed through in-house production!
Over 50,000 rework achievements for BGA with a pitch of 0.35 to 1.27mm! Even for just one piece, you can trust us with circuit boards that have underfill applied!
With light shaping, fine details can be expressed with precision.
Turbine blades for steam turbines and gas turbines
We propose a series of thin film coating equipment that can meet customer needs, utilizing our long-standing thin film coating technology, expertise in film formation, and database.
High-quality prototyping technology that supports manufacturing in this country! Equipped with high-performance facilities, we achieve short delivery times.
Reviving the SH series CPU on FPGA without ending it at EOL.
Are you having trouble with the delivery time for your cast metal prototypes? "Casting Prototype Service!" for cast iron, aluminum castings, and stainless steel castings (lost wax casting)!
Highly transparent and resistant to yellowing urethane gel!
High-temperature ion implantation suitable for the fabrication of devices such as SiC, as well as high-temperature annealing processes for dopant activation, are available!
Are you having trouble with various metal processing and diffusion bonding?
Proposing the development and prototyping of functional thin film coatings. (It is possible to develop and prototype thin film formation even from small lots of rare liquid agents without purchasing coating equipment.)
Design and processing focused on 3D CAD/CAM! We can provide molded products that meet cost, quality, and short delivery time requirements.
Would you like to try making titanium mugs? Our company has a track record of OEM production for outdoor and food manufacturers at low prices and short delivery times!
If you have any issues with prototyping or mass production, leave it to us! We produce tens of millions of high-precision lenses every month. Please make use of our expertise.
Good news for plastic molding! We have developed our own production equipment and are now operating a new production system.
Integrated production from mold making to parts, assembly, and traceability!
We will utilize all available technologies and know-how to support the development.
We have a track record of completing sand-cast aluminum products in just 19 days! We respond to requests for urgent prototype production!
High-Quality, Made-to-Order Mockups for Exhibitions, Evaluation, and Decision-Making
Explanation of autoclave molding of CFRP (carbon composite)!
Are you having trouble with the delivery time for your cast metal prototypes? "Casting Prototype Service!" for cast iron, aluminum castings, and stainless steel castings (lost wax casting)!
Are you having trouble with the delivery time for your cast metal prototypes? "Casting Prototype Service!" for cast iron, aluminum castings, and stainless steel castings (lost-wax casting)!
Are you having trouble with the delivery time for your cast metal prototypes? "Casting Prototype Service!" for cast iron, aluminum castings, and stainless steel castings (lost wax casting)!
We propose a system solution that combines analog high-frequency technology, optical technology, and digital and software technology.
Our company, which manufactures ultraviolet sterilization devices, will design and produce sterilization and infection control devices for your company.
We will perform resin processing tailored to your product specifications.
We value conceptual and visual design and will accurately realize your wishes as requested. Please leave any additional proposals to us.
As long as there is a 2D drawing, it is possible to go from small-scale production to prototyping!
![logo[1] - コピー.png](https://image.mono.ipros.com/public/company/image/be7/316125/IPROS48149032805932300832.jpeg?w=280&h=280)
Gypsum casting offers dimensional accuracy at CT4-5 level without the need for molds. Please make use of it for prototyping die-cast products.
Application-specific support | High-precision shaft processing | Iron, stainless steel, aluminum | From prototype to mass production OK
Mainly responding to requests for prototype samples of stators for EV motors! Progressing prototypes in the best possible way for various sizes and wire shapes.
We provide one-stop manufacturing services from hard and soft contract design in Eastern Europe and Belarus to prototype production and mass production in Japan.
An aerial display like in sci-fi. I made it experimentally.
Improved damage during the tightening process of the nut section! Due to being made of resin, it is lightweight and has increased work efficiency.
Shapes and materials that can be created using unique technology, such as SUS430 and a plate thickness of 0.2mm. This expands the range of applications for 3D printers.
High-precision machining supported by precision mold processing technology!
Assistance tailored to your company's needs! We can accommodate your specifications and also provide suggestions for materials and formulations from our side.
It is possible to create an appearance model for design evaluation and a movable model that realizes motion/function!
Are you not assembling radial parts and axial parts by hand?
The period until production starts is very smooth! We will reflect the VA/VE design from the development stage in the mass-produced products.
Assistance in development by one of the world's largest automotive parts manufacturers! Mass production quality and advanced technology cultivated on the road. Also compatible with relative position identification of detected objects!
We propose metal materials tailored to our customers, and we also offer 3D printing prototypes (from resin to casting and metal 3D).
Equipped with alignment features, continuous printing is also possible.
Casting × 3D Printer "Mold" and "Core" 'SCM Series' capable of supporting everything from prototype development to mass production! Supported by equipment, materials, and software.
Easily shape even difficult forms! We respond to a wide range of needs, starting with the production of prototypes and trial products.
Attention concrete product manufacturers: Would you like to try "3D printing"?
Fully automatic vacuum casting machine for producing a large number of prototype molded products in a short period.
Speed up mass production! We can reduce the number of prototypes and smoothly transition to mass production.
Acrylic resin, polycarbonate resin, and ABS resin adhesives have many proven results! Many proven results as an alternative to methylene chloride (dichloromethane)!
Leave the prototyping and mass production of industrial precision machinery and parts (plastic and metal) to us.
At Cross Effect, we can consistently handle planning, design, prototyping, and small-scale production in product development.
Even small lots can be MIM-processed for small parts!!
This is a proposal for a resin extrusion test using a single-screw extruder.
Utilizing processing technology that enables short delivery times and low prices, we have a track record of shipping titanium pots with a thickness of 3mm! We support OEM products that enhance brand value!
One-stop service for low cost and short delivery time! 3D modeling of metals and resins, as well as 3D data creation from physical objects, is possible!
【Quality UP】Improving durability by avoiding welding at stress concentration points.
Technical document featuring an explanation and case studies on the production of transfer mold peripheral equipment "Finger."
We are engaged in a prototype business for wire mesh that realizes low cost and short delivery times.
We solve your problems with handheld fiber laser welding technology!
Comprehensive support from prototyping to mass production! We provide appropriate solutions.
We are determined to strive towards becoming a 100-year company with "LUC (Luck) Quality" even 100 years from now.
Contributing to improved fuel efficiency! Introducing a case study on the development of the Smart Vortex Generator.
Introducing our strengths! Please feel free to consult us about prototypes, original molds, or anything else.
Please take a look at the tensile test data for "ADC12," which can produce prototypes with components almost identical to mass-produced products.
A proposal for flywheel energy storage that resolves all weaknesses. Energy storage facilities that stabilize solar and wind power, and EV fast charging stations that are not affected by outside temperatures!
We will introduce case studies of problem-solving by SYS Corporation!
A professional group specializing in special metal materials! We meet all customer requests with small lots and short delivery times.
Creating a future with advanced technology that is kind to the Earth.
A consistent system from prototype molds to metal processing! Achieving high quality with short delivery times and low costs.
Reliability testing! It is possible to conduct temperature and humidity cycle tests in accordance with JIS, NDS (Ministry of Defense standards), and others.
Creative ideas from experienced mold technology professionals, produced quickly and with short lead times!
We will continue to provide the necessary technical services with innovative ideas and flexible thinking!
3D implementation services (implementation services using TSV technology, etc.)
We will support you with a consistent system from design to prototype creation and mass production.
150 welding robots! Introducing the equipment owned by Shinba Iron Works.
We can accommodate various prototypes and offer proposals with an eye toward mass production! We perform sand casting and gypsum casting.
Solving the "troubles" related to press molds and manufacturing! This is a diagnostic service by the "mold doctor." Molds and manufacturing processes can be restructured!
The wireless signal processing device base kit is a product that includes an FPGA board and RF module necessary for developing wireless devices using FPGA.
Providing suitable solutions for manufacturing needs, such as the equipmentization of production technology!
We solder components on the circuit board, from tiny chips to large connectors and BGA parts.
The 3-liquid polyurethane elastomer enables the reproduction of rubber-like shapes! Please use it for prototype elastomer products where hardness specifications can be set!
We accept various patterns such as 'from design to production,' 'from procurement to production,' and 'design and prototyping only.'
Rapid production of prototype development products with short lead times and low costs! Sand mold production using a rapid sand mold printing and layering device.
We produce low-cost, high-quality pressed parts in a timely manner!
Professional in lathe machining! Responding to VA/VE and cost reduction needs.