Comprehensive catalog of air nozzles from Silvent, dedicated to research and development for improving the working environment!
Free demo machine rental. Prevents dirt on workpieces and jigs caused by excess grease after dispensing! Even rice grain-sized cuts are perfect! Solves grease contamination.
A gas belt nozzle that can be installed on existing injection molding machines!
Supports security measures with a design that considers the operating environment, including overflow prevention features.
Nozzle used for combustion in oil water heaters. Stable particles are obtained, and a wide range of flow rates can be adjusted.
Drinking water and industrial water are available! It sprays mist to minimize dust generation.
Uniform watering in all directions! We offer a variety of options from low flow to high flow.
By synchronizing with the tap's stroke, it allows for direct contact with the tap through pinpoint lubrication, enabling intermittent point lubrication of the minimum necessary amount.
This spray nozzle enables ultra-low flow fine mist spraying, making it ideal for releasing agent spraying and coating.
A simple structure airless nozzle that instantly turns liquid into fog using commercially available disposable syringes!
An air nozzle that sucks in and discharges air from the surroundings at 10 to 24 times the supply volume.
Silver tungsten alloy contact tips with excellent high heat resistance and high wear resistance.
A nozzle for industrial applications that allows for continuous operation without clogging, even when spraying high-viscosity liquids.
Especially effective for wash-off cleaning.
Responding to diversifying and advancing user needs! Introducing fan-shaped nozzles, fine mist generation nozzles, and more.
Contributing to the improvement of customer productivity, enhancement of product quality, and reduction of production costs!
[Demo OK!] Reduce chemicals and sludge with coagulation sedimentation and pressurized flotation treatment, cutting water treatment costs by over 50%! Cost recovery possible in just a few months.
Sonic Corporation's blower and air knife use high-speed air of up to 25.4 m/sec for water removal and drying! Energy-saving blower! Demo units available for loan!
A collaborative product of Rehila's nozzle technology and Sonosys's ultrasonic technology.
[Patent] Instant complete water removal of workpieces with air blow = complete drying!
Seamless uniform air discharge nozzle. Length can be freely adjusted in millimeter increments.
There are spray nozzles, dual hoses, and dual blocks, among others.
【Exhibition Participation】Powerful air blow across a wide area. Efficient water drainage, oil separation, and dust removal. Moreover, energy-saving.
Eliminate the problem of clogged nozzles! Pressure shower nozzle "Nozzle-less" with no clogging.
Bubble flow injection nozzle that is effective for liquid and immersion cleaning with fine bubble jet streams.
For cooling, cleaning, and surface treatment of steel materials, steel plates, etc.! It sprays water over a super wide-angle circular area at 120° with a pressure of 0.2 MPa.
Super wide-angle drencher flat spray type! It sprays water stably over a wide pressure range.
With the Atomax nozzle, fuel is burned in fine particles, resulting in high thermal energy and reduced fuel consumption!
Spiral full cone nozzle with minimal clogging and a variety of materials available.
Unique and high-quality, also proposing energy-saving solutions! Comprehensive catalog for kitchen facilities.
Maximum water-saving rate of 95%. A revolutionary water-saving nozzle that achieves excellent water-saving effects and high cleaning performance. It allows for stress-free reduction of water bills.
Production of suction nozzles for parts with special shapes. Consistent production from design to manufacturing. If you have any issues with nozzles, please use the Tokyo factory.
A wide variety of hoses and fittings for civil engineering and industrial products!
A nozzle that can lower the perceived temperature just by attaching it to the end of spot air conditioning! No construction work is required, and it can be easily installed!
Certified by the Japan Electrical Safety & Environment Technology Laboratory (JET)! Achieved a reduction in water volume and water pressure within 5% through dual technology.
It is possible to reduce the purchase cost of the medication and the replacement cost of the RO membrane! We will introduce case studies from dialysis hospitals.
Even after six months, there has been no decrease in water quantity or quality! Achieved a significant delay in the replacement period compared to usual.
Simultaneously achieving the prevention of biofilm detachment and reattachment in circulation lines! Case study of a super sento (Japanese public bath).
By installing it on the water supply pipe at the outlet of the water tank, all the water in the clinic will be UFB water!
The nozzle diameter can be changed! Both water pressure and water flow are kept within 5%, allowing for stress-free use.
Successful water quality improvement (removal of blue-green algae and musty odor) at the intake of the water supply for the Ogawa River estuary dam reservoir water quality conservation project using the YJ nozzle micro-nano bubble generation device.
The new type of nozzle is characterized by its high vacuum level. (Currently, it has a maximum vacuum level of -0.094 MPa.)
The Lehira company's fine mist cooling spray nozzle is effective with ultra-fine mist spraying.
Eliminate color unevenness and temperature unevenness! Achieve quality improvement and cost reduction for resin molded products.
Complete water drainage is possible! An air knife nozzle with amazing uniformity across the full width of the spray!
A spray nozzle capable of fine-tuning flow rates of 0.5mL/min and intermittent spraying. Equipped with a flow adjustment mechanism and an ON/OFF valve.
Long air nozzle compatible with blower air, ideal for wide curtains, drainage, drying, and dust removal.
It allows for a wide range of flow control and supports flexible intermittent spraying with a cylinder integrated into the nozzle.
It can uniformly apply viscous liquids such as press oil, rust inhibitors, lubricants, and release agents. With a flow meter, it can measure a small spray amount starting from 0.1 mL/min!
Introducing a flowchart on how to select nozzles for spraying very small flow rates, which is a topic of particular interest!
The Exaier® series air amplifiers make it easy to connect during piping!
Various high-pressure washers (maximum pressure resistance of 60 MPa), underwater shower cleaners that can remove oil and chips, and parts washers ideal for small components are featured.
Integrated flat air nozzle and hot air generating heater!
A dista nozzle that can secure a linear jet of air.
For air blow powder transport and more! It demonstrates strong air blowing power with a small amount of air.
The "VNP" and "DSP" series have powerful cleaning capabilities and are suitable for cleaning filter presses, removing dirt from conveyors, and cleaning equipment and parts.
Achieve cost reduction and quality improvement with precision cleaning suitable two-fluid nozzles, optimized single-fluid nozzles for nozzle usage, and uniform slit nozzles.
The "JJRP/INJJX-Y/JJXP/BBXP" series achieves etching quality and reduced maintenance with a chemical-resistant spray nozzle.
Over 35,000 successful cases with lost-wax casting. We provide optimal proposals based on the required performance and size from a variety of manufacturing methods.
One-touch attachment and detachment of the nozzle, securely fixed with a click. Reduces time.
Powerful and uniform cleaning of the interiors of pipes, drainage pipes, ducts, etc., by swirling and spraying high-pressure water.
A steel mill saves 11.2 million yen with a new nozzle! Here’s an example of process improvement.
Intense turbulence generates a large number of fine bubbles! Used for biological activation effects and cleaning-related applications.
For air blowing work in narrow or recessed areas. Made of ultra-lightweight PP resin.
Why not change the nozzle to eliminate time loss?
Top brand of spray nozzles: Niikura Industry
The structure is simple and easy to handle! Our unique internal design without blades allows for water distribution across the entire circular area.
Watering over a wide rectangular area! Introducing a spray nozzle suitable for watering in low-pressure zones.
Self-rotating mechanism driven by cleaning liquid pressure! Ideal for labor-saving in cleaning operations and cleanup.
Maximum water-saving rate of 95%! Equipped with a clog prevention flush function, no maintenance required.
It removes a wide range of static electricity and impurities, dust, etc., from small objects.
A two-fluid nozzle that precisely sprays a very small amount to obtain ultrafine particles with an average particle diameter of about 5 μm.
It can spray ultra-fine particles (5μm). No need to worry about clogging even with high-viscosity liquids! This spray nozzle has only two parts, making maintenance easy.
A nozzle suitable for cleaning operations. It maintains cleaning power while also providing a gentle spray flow rate.
By supplying multiple liquid agents through separate pipes and ejecting them from nozzles, a mixed mist is generated.
A spray nozzle with a wide working range that is resistant to clogging and can efficiently spray fine particles, made of SUS316L and high-strength brass.
The spray nozzle has a very large discharge diameter ranging from 3.5 mm to 5.6 mm, allowing for atomization of high-viscosity liquids without clogging, dripping, or droplet fall.
Simple disinfection with micro mist (a quick spray for clean hands)
Sample available! Send the rectifying processing liquid vigorously to the processing point! A high-performance nozzle that is easy to attach!
Ideal for cooling and humidifying with fine particles. Basic type of hollow cone spray.
Full cone type nozzle that sprays in the same direction as the installation piping.
A fine mist with a large flow rate (1L/min) can be obtained at a water pressure of approximately 0.2MPa.
Maximum water-saving rate of 95%! A revolutionary water-saving device that achieves excellent water-saving effects and high cleaning performance. Available for evaluation loan.
Introducing the parts division of Watanabe Manufacturing, achieving long life with corrosion-resistant and wear-resistant materials!
Watanabe Manufacturing's unique know-how solves problems with long lifespan and low cost!
Lightweight and compact! Amplifies compressed air for efficient air blowing.
Nozzle with a 45°/90° angle for application into gaps.
Creating useful products! We deliver added value that connects to our customers' benefits.
Stabilization of coating amount is possible! Introducing "Non-Stick Coating (TS Coat)" and "Inner Diameter Polished Pipes."
It is used in a wide range of fields such as chemistry, food, and cosmetics! A compact and lightweight cleaning nozzle that provides precise and stable 3D and 2D rotational spraying.