Leave the production of prototype press parts and the design and manufacturing of various jigs to us.
Introduction of a simple core break test jig that is resistant to scratches! i-TOOL "SHINSUKE" "DAISUKE"
【Authorized retailers provide after-sales support】Results can be read 30 minutes after the start of testing! Early detection with a plant pathogen testing kit.
Perfect for distortion removal!
A probe card that excels at simultaneously measuring a large number of microchips created on a semiconductor wafer.
The bending angle can be measured easily and quickly.
A specialized tool for processing natural nails born from on-site needs! It significantly reduces setup time and time until molding, as there is no need to search for suitable dummies!
Visual inspection of tablets
Sensor sensitivity increased by 400%! A leak detector that achieves excellent workability through miniaturization and lightweight design.
Instant flow meter that allows for accurate measurements with just one touch!
"Pioneer of carbon jigs" - This is an example of a lead alignment jig made from aluminum by Akebono Seiki Kogyo.
One-touch reliable sealing!! The BC series compatible with helium and hydrogen achieves high-precision leak testing.
The number of test specimens to be installed is 1 to 6! It is a type that allows multiple specimens to be installed simultaneously.
Simultaneous inspection of screws and depth measurement! By inspecting the screw tolerances while measuring the length of the screws, efficient work can be performed.
This is a high-precision plug gauge (internal diameter measuring instrument) from Germany's Daiatest Corporation.
No training required! Hammer-type quantitative vibration device that does not depend on location or direction.
There must be more ways to be helpful and things to strive for.
For non-destructive testing and contamination checks! A fixed LED black light that does not require troublesome wiring.
Automatic full inspection, zero inspection omissions! The inspection time is significantly reduced to about 2 seconds per hole.
Just place it, and you're all set! Portable automatic centering roller table jig.
Proposal for cost reduction through collaboration with overseas (China) factories! Prototyping support in the virtual world is also possible.
It is a super precision master block that exceeds conventional right angle accuracy with a right angle precision of within 0.0005mm/100mm!
We will challenge the limits of processing with precision and delivery time. Please feel free to consult with us.
Achieved a minimum pitch of 30μm matrix! Semiconductor test fixtures capable of narrow pitch probe settings.
It is possible to test mold shapes without attaching them to the molding machine.
Experience in supplying major automobile manufacturers; design, manufacturing, and guarantees (precision inspection, actual measurement confirmation).
Graphing of measurement data is also possible! A data logger equipped with a water hammer measurement function.
Easy to use! Just press a button! Automatically detects water leak sounds.
We are currently offering a guide that clearly explains the method for selecting probes with illustrations.
It can be used for assembly and inspection of machining centers, etc., for 3-axis measurement!
It is possible to check the continuity of the code! We will introduce examples of jig design and manufacturing.
It is perfect for checking the finish condition of internal welds in tubes and piping!
Significant cost reduction for AI appearance inspection systems!! A starter set that can be introduced more easily, more simply, and in a short period of time.
Significant cost reduction for AI appearance inspection systems! Start distortion inspection immediately.
"Pioneer of carbon jigs" - This is an example of a soldering jig (movable) for lead frames aimed at semiconductor manufacturers by Akebono Seiki Kogyo.
"Pioneer of carbon jigs" - This is a case study of Akebono Seiki Kogyo's aluminum + urethane rubber in-crawl.
"Pioneer of carbon jigs" - Examples of carbon jigs for sealing from Akebono Seiki Kogyo and carbon processing products.
"Pioneer of carbon jigs" - This is a lead cassette case study from Akebono Seiki Kogyo.
Automobile testing compatible with TWC testing method!
It is a fixture that allows for easy and quick connection to BtoB connectors and enables inspection.
Rich experience in manufacturing small and precise jigs. Leave it to us from the conceptual stage!
We would like to introduce the features of ceramic pin gauges that are not found in carbide or steel pin gauges.
Further trust and peace of mind in inspections. Designed with a new mechanism for complete freedom.
Reliable quality... That is the pride of Kumamoto Seiken Industry.
This is a small precision vice for measuring instruments that maintains accuracy even when rolled 90 degrees, thanks to its six-sided structure that eliminates the need for set changes and ensures right angles.
This is a spline gauge that allows you to check the shape and size of a spline simultaneously with numerical values.
Mechanism design that meets customer requests! Also compatible with various measurement device interlocking control.
The material used is SUS304! Improvements have been made, such as integrating the base into a single piece.
The weight is approximately 2kg! The gaps between the bands have been widened for easier observation.
Equipped with a holding plate to prevent the test pieces from floating! Multiple test pieces can be installed simultaneously.
If you have any issues regarding the hopper, please consult "Hopper.COM."
Online sales of standard screws, bolts, washers, and nuts.
Using a thin XY rotation stage. Here is an example where centering can be done in a short time.
We will introduce a case where the usability of position movement has improved by using a long stage!
From jig manufacturing and tool production to design, we provide comprehensive support. For high-precision custom jigs, trust us. If you are looking for a jig manufacturing company, choose BRICS.
From the chassis to the harness and FCT production! Our dedicated staff will assist you based on your specifications.
A fixture for fixing various types of LEDs (RGB, LAMP, COB, SIDE VIEW, CSP, etc.) to measure optical and electrical characteristics using an external power supply.
It has a built-in probe for detecting open and close states, allowing for electrical verification of the current open and close status.
We will create inspection jigs tailored to your needs, such as those for inspecting injection molded products.
We guarantee improved productivity and stable quality through jigs designed and manufactured in-house.
It suppresses fever and achieves stable measurements!
We provide a fixture package to test all ten items of ISO11040-4!
Dramatically reduce the "drawing burden" of jig design! We will explain the secrets to strategically utilizing designers' resources.
We are using a wide range of items such as inspection jigs, displays, aquariums, and showcases!
Compliant with ISO 815! We accept custom orders for items such as distance plates.
A 3D welding table that reduces welding distortion and enhances the quality and efficiency of welding work. A clamp system that offers strong fixation and flexible handling with simple operation.
Custom product estimates can also be handled with hand-drawn sketches! Please print the PDF and contact us via fax.
This is a high-precision digital gauge (digital measuring instrument) from the German company Daiatest, which has achieved a minimum display value of 0.1 microns. "Diatron 1000"
Achieve high load with air press operation! An air press machine for board inspection with increased pin count and compatible board size!
Improvement in positioning accuracy, increased holding power during transport, and compatibility with inversion operations are also possible! This may significantly enhance work efficiency.
![8[photo].jpg](https://image.mono.ipros.com/public/product/image/a13/2000269778/IPROS07026825131247450720.jpeg?w=280&h=280)
Custom One-Touch Multi Coupler
Contact probe, pitch 0.45mm and above, long lifespan, high quality, available for purchase from Misumi starting from one piece.
Make contact by bringing one side of the plunger into contact with the electrodes or relay pins of the relay board! L=20mm to 1.5mm, φ1mm to φ0.1mm.
Design, processing, inspection of printed circuit boards in the Chubu and Tokai regions, design/manufacturing of board inspection jigs, and assembly contracting.
Supports a wide range of audio frequencies with a volume approximately 1.5 times greater than before! A sound listening rod used for leak detection.
A specialized manufacturer of tools! We conduct design and production, as well as research and development that matches the needs of the times.
For those troubled by the deterioration or aging of cast iron plates!!
A thorough explanation of "Leak Seal," which means leak prevention! Introducing the "Leak Seal Service" that can be widely used for various leakage troubles.
With the unique technological capabilities of Ark Industries, we respond to all customer needs regarding "specifications, cost, high precision, and weight reduction"!
We support reliable manufacturing with our uniquely designed "jigs" and "inspection measurement jigs."
This is a inspection jig made using a special material called Invar.
Design optimized for testing MEMS sensors! Inertial sensor system testing equipment.
Precision measurement with CNC three-dimensional measuring machines and 3D scanners. We handle everything from drawing verification to shape validation and issuing certificates!
Since it can be installed with hand tightening, no tools are required! It enables valve inspection offshore.