A wide variety of battery terminals, automotive wires, battery cables, and more are available!
Non-contact rotary sensor, excellent durability with a metal case.
Timing cam, up to 3 sets of sensors can be installed! Standardization of 8 models with a shaft spacing of 70 to 450 mm.
From the sale and processing of automotive repair parts and recycled parts to the replacement of friction materials for industrial machinery.
We reduce the process load for our customers with deep hole, keyway motor shafts produced by cold forging.
Stanyl is a PFAS-free material option that offers excellent wear resistance, very low friction, and outstanding flowability — all in a high-heat-resistant polyamide.
Using boron steel for the material! High durability, toughness, and high-quality cutting edge.
The "CD-100" from Japan McDermid is a non-chromate conversion coating for aluminum that does not use hexavalent chromium and has excellent corrosion resistance.
The high-speed, high-performance FA type is complete! The pick-and-place unit has further enhanced usability.
It features a user-friendly and very easy-to-use interface.
Explaining the autonomous driving technology of AMRs and service robots. In-wheel motors that allow for low-profile designs and quiet operation are under consideration.
A type of point that is inserted by screwing in! We have a diverse lineup available.
Experience in supplying major automobile manufacturers; design, manufacturing, and guarantees (precision inspection, actual measurement confirmation).
A rich lineup to accommodate all types of trucks and trailers.
Keep the network clean and save energy! 100% continuous power regeneration is possible.
Uniform resin content, high heat resistance, high toughness! Capable of molding high-quality CFRP and GFRP.
Acquired international standard IATF16949 certification! We offer automotive wire harnesses at low prices with reliable quality.
Half the price of domestic equivalents! This is a next-generation in-wheel motor that reduces the cost of AGV development.
A quick-drying surface stabilizer spray that combines the best of mold coating and surface stabilizers! It achieves both anti-seizing effects and improved surface strength of molds.
Laser microprocessing: carbide chip breaker (groove) processing
Measuring horsepower over 1000 kW! A meter capable of measuring up to 300 km/h.
In 2020, South Korea successfully developed its first domestically produced electronic shift actuator (Shift By Wire).
Multifunctional diagnostic tester compatible with the world standard ECU diagnostic standards ODX and OTX, based on various standard diagnostic protocols (such as UDS and OBD).
High-quality, high-performance components of the planetary mechanism, such as internal structural parts of transmission devices.
Compatible with all drive components!
Processing of bar materials up to φ51 is now possible! Leave precision parts processing to us.
Is it really possible to do this with forging? We have successfully shaped the teeth of the final gear, which were traditionally formed by hob machining, using hot forging.
It greatly contributes to achieving comfortable and safe driving!
Beyond imagination, the future of electronics! Check out our servo-driven valve gate system.
Providing customers with an unprecedented level of compatibility and flexibility, regardless of industry or application!
A clear explanation of typical materials such as engine parts and handles, easy for beginners to understand.
Since a round shaft is used, it easily accommodates long strokes!
Prototype of engine assembly, piston, crankshaft, connecting rod, camshaft, durability testing of engine parts, machining using a composite processing machine.
A compact transmission device integrated with a hydraulic pump and hydraulic motor. It can be applied to various passenger vehicles.
We support gear grinding for sudden machine troubles and mass production startups (limited to the period until equipment installation is completed!).
As a Tier 1 automotive engine parts supplier, we propose the creation of high-quality products.
We respond to a variety of advanced needs, from machining to assembly and painting.
Because it's a specialty store for rebuilt parts, it's fast, cost-effective, and reliable.
Maintenance-free with grease sealing! Easy control with a proven cam-type index and stable drive.
Achieving the world's thinnest specification of "160mm" with a cam mechanism scrap cutter!
Software for the design and manufacturing support of planetary gears
A list of specifications for the Rini Power Jack, product specifications, selection and technical materials are available!
A device for trimming (deburring) products for aluminum die casting machines.
Non-contact high durability and high precision position sensor!
Introducing the reinforced liquid deep cycle battery 105A (with hose)!
For those struggling with prototype delays and high costs due to design changes! We solve challenges with unique designs and fully automated lines, achieving stable quality and significantly shorter delivery times.
Intermediate shafts, input/output shafts, and others that contribute to weight reduction and cost savings.
![[YURATECH]多機能レゾルバ.png](https://image.mono.ipros.com/public/product/image/086/2001514315/IPROS6232403227159441661.png?w=280&h=280)
Ignition coil, ignition plug, glow plug, EGTS, EGRTS, temperature sensor
Achieve cost reduction and short delivery times without molds! We provide high-precision products.
This is a dimension table and performance table for coupling by drive source. Please make use of it.
This is a proposal for a 3D lock structure. By adding a locking mechanism to the ball joint, it enables position fixation in three dimensions. (PAT. PENDING)
Ideal for batteries and high-speed motors! A permanent, strong, and metallurgically pure bond with excellent physical properties is achieved in an instant!
Continuous production of both large and small parts is possible through mold internal cooling control!
Protects tires from wear due to cuts and shocks. For quarries and tunnel work.
Flat bar with tungsten thermal spray coating! Suitable for bucket reinforcement.
Rubber properties suitable for the usage environment! It demonstrates excellent traction even on slippery, snow-covered ground.
By controlling pressure and preventing the intrusion of water and contaminants, we protect the powertrain system and achieve durability that manufacturers can trust!
VICIVISION measures cylindrical workpieces non-contactly with high speed and high precision.
Hydraulic servo-type vibration testing machine used for fatigue and durability testing of metal and mechanical parts.
We will produce prototype parts made of aluminum and metal with a short lead time.
Over 10 million units produced annually, including spur gears and gear shafts!
It is ideal for parts that require high transparency made from polycarbonate machining! This is an introduction to a case study of machined parts that visualize the interior of a car pump.
A wide range of products that include elements internally composed of transmission devices, steering devices, and power lines.
We offer high-quality products at low prices! We have a wide range of standard products available and also accept custom orders.
A professional company specializing in powder coating for automotive parts and construction materials, as well as the production of one-off parts.
From parts procurement to inspection! Leave the harness business to Ishizaka Electric!
We provide metal fasteners to the global automotive industry!
Achieved hollow shapes that are typically difficult to manufacture with molds using MIM (Metal Injection Molding). Mass production is also possible due to having one of the top-class production equipment holdings in the industry!
Punching up to 13mm is possible! We can process a wide range of steel types such as stainless steel and aluminum, including large press plates and laser processing. Sales of blank materials are also available.
A company that adapts to changes over time, from automotive parts to mobile phone business.
Putting customers first, we have introduced new equipment! Over a long history, we have accumulated a wealth of know-how.
It is a drive system widely used in forklifts.
Inverter for motor control for hybrid and large electric vehicles, compatible with high voltages up to 750V, has a proven track record in European city buses for many years.
With 4 units, it can move in any direction! No need for power sources like electricity, hydraulics, or air, making it easy to operate.
Kyowa Kogyo Co., Ltd. responds to a wide range of customer needs, including the design and manufacturing of conveyors, automation dedicated machinery, special processes, material sales, and machining.
ACQ580, 0.75 to 500 kW! Compatible with a wide range of fieldbus protocols.
The current status of fuel cell vehicle development, which is close to practical application, and the latest information on the trends of entering manufacturers.
Always maintain the tension of belts and chains at an appropriate level to reduce noise and improve lifespan!
From concept examination to detailed design, drawing creation, and preparation of production arrangement lists!
40W motor without a heat sink! Brushless motor driver for weighing conveyors.
Rapid charging of up to 4.5MW! The rated current is up to 3000A, and the rated voltage is a DC 1500V charging connector!
In addition to working on ensuring safety and reliability, we are also engaged in the development of new materials.
A compact transmission unit that integrates a hydraulic pump and hydraulic motor. It can be applied to various passenger vehicles.
A lightweight, compact transmission with a continuously variable transmission (CVT) equipped with HST. Ideal for walking snow removal machines, etc.
A compact transmission device integrated with a hydraulic pump and hydraulic motor. It is ideal for crawler-type snow removal machines.
We are engaged in the development of magnesium alloys and die casting of magnesium alloys using the cold chamber method.
We are engaged in the development of magnesium alloys and die casting of magnesium alloys using the cold chamber method.
We are engaged in die casting of zinc alloys using the cold chamber method.
We are engaged in die casting of zinc alloys using the cold chamber method.
We accept die casting of pure aluminum, various aluminum alloys, as well as zinc and magnesium.
Manufacturing bearing components for railway vehicles with outer diameter and inner diameter grinding finish, and diagonal hole oil groove processing for SCM440, SF440A, SC450A, etc.