Here is an example of wrapping a roll brush around a pipe!
An example of a corner section with a double structure to compensate for the often insufficient amount of hair! The balance between the amount of hair and the straight sections is well maintained.
Cleaning hard-to-reach metal parts too! Example of a brush for round-bottom flasks.
Pest control measures based on IPM that consider the environment! Chosen for many years.
Introducing various products such as racks for storing, organizing, and managing hygiene management brushes, as well as maintenance brushes!
The warmth of wood lingers in the heart. A special feature on eco-friendly novelties.
Successfully achieved micro-spraying of hair oil! The spraying amount of the liquid decreases as the viscosity increases.
This is a wheel brush made by Takashima Sangyo, a long-established brush manufacturer. We also accept custom orders starting from one piece.
The key is to choose the right type of hair material for your purpose! You can choose from four commonly used patterns.
Even with a small brush, using #13 creates an amazing volume! Here’s an introduction to the application of the channel straight brush.
Bend and install. Introducing the application of R-shaped (bending process) brushes.
Manufactured to function as a component with a brush! Introducing examples of brush components in machinery.
Adjust according to the purpose and shape of the fittings. Here are examples of brush parts for machines.
Introducing an advanced technique for the cup brush that allows you to achieve a substantial amount of hair volume!
We use the largest #13 in our product lineup! Here are some examples related to straight brushes.
Introducing examples of production techniques to maximize hair volume in relation to a specified size!
By extending the tip, it firmly reaches the areas where you want to apply the brush! Here is an example that focuses on the cutting method of the bristles.
It is a material called ultra heat-resistant fiber, which is also used in firefighters' uniforms!
The width varies even when brushes are made with the same gauge channel using different types of materials, wire diameters, and wave processing!
An idea product installed on both sides! Here is an example focusing on the method of attachment to the hardware.
Introducing an application of a ring brush that has undergone bending processing on a channel brush made in a straight line!
Focusing on "width"! Introducing a case where five brushes were arranged side by side and attached using welding processing.
Install the straight brush facing each other! Introducing the advanced applications of the straight brush.
Focusing on bending processing! Here is a case study created because the brush does not make proper contact in a straight state.
Introducing an example of a potted brush with polypropylene bristles on a wooden base!
Introducing a green brush that makes it easier to detect hair loss!
Tapered shapes are also possible! There are restrictions on the material and dimensions, so please contact us.
A brush with PPS (a material excellent in heat resistance and chemical resistance) wrapped around a segmented shaft in a channel!
Introducing examples of roll brushes with pitch winding, leaving gaps!
We can deliver with installation brackets included! An example of an embedded brush used in precision machinery manufacturing equipment.
Introducing an example of a brush planted by making a hole in a round PVC base!
An example of inserting a helicoil on the backside of the platform to ensure it can be securely screwed in!
An example of a brush with a spiral cone and a universal joint that allows the tip to bend, featuring a swivel design!
Here is an example of a roll brush with a dome-shaped tip!
Introducing examples of brushes attached radially to a channel-type brush!
An example of a brush made with a channel brush attached radially to the axis!
An example of welding a straight brush to an axis to be used as a rotating brush!
An example of a radial brush that adopts a pipe-shaped shaft structure with a φ40 shaft passing through it!
Introducing examples of "R-shaped brushes" with part of the straight brush bent!
Introducing an example of a brush with R bends of different hair lengths combined into one!
Example of a brush with a radius of 500mm! Brushes of various sizes can be manufactured, not limited to a radius of 500mm.
Introducing examples of brushes bent in a "kuno" shape! Channel brushes are customizable.
An example of a straight brush bent into an L shape! It is used for various corners.
I took a close-up shot of a small twisting brush!
Introducing examples of brushes made with thin brass wire with a diameter of 0.1mm!
By installing a shank (pipe), weaknesses can be resolved! It can also be attached to the device.
An example of a twisted brush bent into a "U" shape! We can also handle bending processing.
Green nylon is often used in food factories! Here is an example of a twisted brush.
Introducing an example of a twisted brush with a smaller diameter along the way!
An example of a brush with shanks on both sides for attachment to a device!
We will take the bottle and conduct a test! We also accommodate the shoulders of bottles that are difficult to clean.
Easy to use! Introducing examples of twisted brushes with a T-shaped handle.
Introducing examples of twisting brushes suitable for small hole diameters! Used for deburring after hole processing.
An example of a brush with a tuft resembling a pen at the tip! It can also be used for brushing at the end.
Removing small debris attracted by static electricity! Example of Thunderon’s straight brush.
Easy fixation with bolts! A case of a linear brush integrated with a perforated fitting.
Attach to the fittings divided into three rows and one row! An example of a straight brush with varying hair lengths.
Achieving a structure that moves like a noren! An example of welding a straight brush to a round rod.
U-shaped metal fittings with inverted V-channel! Examples of custom-made brushes that accommodate various shapes.
Design complex shapes freely! A case study of producing hardware with laser processing using a straight brush.
Palm-sized at 20mm × 30mm! Example of a small linear brush.
In workplaces related to paper where static electricity is likely to occur! A case of a straight brush made with horsehair.
Trimming the ends on the sides! An example of a straight brush that addresses unnecessary hair during installation.
Thickness of hair 1.5mm! An example of a straight brush made with thick nylon hair.
Channel #13 is our largest size! Case study of the large channel straight brush.
Ideal for cleaning around water areas with PP0.2 material! Example of a straight brush for water-related use.
For dusting too! An example of a brush made with fluffy goat hair.
Compatible with narrow mounting areas! Examples of wire straight brushes.
Explanation of the bristle spread of metal brushes! Case study of wire brushes.
Supports installation on devices! A case of a wire straight brush integrated with a metal fitting.
Even uniquely shaped items like those in the photo can be produced from just one piece. Ideal for cleaning narrow spaces inside equipment.
Products of trust and stability continuously made by a long-established company in the United States.
Perfect for washing mesh items and small parts like strainers and cutting boards!
