The lineup includes the digital temperature display type "DMSD series" and the simple temperature control type "MSD series"!
Nitrogen does not have a reducing effect like flux! There is a risk of an unbalanced state occurring.
Achieve increased exhaust power and reduced wave impact! The preheating four zones allow for individual temperature control!
We deliver the greatest economic value through technology that realizes a positive cycle between the economy and the environment.
Heating settings up to 450℃, compatible with formic acid reduction processes, standard equipped with substrate cooling function.
The selective soldering machine has undergone a model change! Managing the device, which has been cumbersome until now, can be done easily.
A cutting-edge machine that performs various functions in one unit! The transport and jet flow motors are inverter-controlled, allowing for diverse adjustments.
Over 50,000 rework achievements for BGA with a pitch of 0.35 to 1.27mm! Even for just one piece, you can trust us with circuit boards that have underfill applied!
[Parts Repair/Repair/Reimplementation] Stable and safe rework operations, standard solder and lead-free solder, compatible with large and small circuit boards, large and small devices!
The temperature control status is visually indicated by the blinking of a neon lamp! Specifications for both 2-wire and 3-wire types are available.
Focusing on the 'optimal timing'! Also able to handle back fillets for through holes without any issues.
No teaching required! You can create a "soldering program" on your PC screen.
Zero waste solder + CO2 reduction for environmental measures!
Soldering with a robot! It can accurately position lead wires and perform soldering.
Equipped with laser-type jet wave height detection function! Introducing the production equipment of VEMS Corporation.
High-efficiency spray flux applicators! We will also introduce the specifications of each device.
A station-type function built into a single soldering iron! A smart soldering iron with a digital display.
By using a dedicated heater to burn the ceramic sleeve, we incinerate the adhered dross and perform cleaning.
A solder pot made of cast iron with surface treatment, improving erosion resistance.
The "Demo Now Available" partial soldering device, also known as point dip or selective flow, solves the problems of flow soldering!
It solves the issues of conventional soldering with soldering irons and point jet soldering!
Compatible with ultra-small components of size 0201. A substrate suitable for advanced packaging such as sub-modules and SiP, surface mount machines, and mounters!
【Parts Repair/Repair/Reimplementation】A network that leaps into the world! We will make new proposals with new technology.
Low-cost temperature controller with digital display and auto-tuning function!
The tip is finished with a Teflon coating! We also have suitable support tools for stable resin crimping.
Shortest half-day estimate / Wire discharge processed product / SUS304
I am a specialist in soldering robots. I bring hope to challenging implementations that had given up on labor-saving and automation!
Rapidly heating a narrow spot to 300℃! Compliant with various regulations such as ICNRP and the Radio Law.
It is very inexpensive because it only requires heating. Since the soldering material and flux are supplied in advance with the paste, soldering can be done with just heating.
Compared to the previous soldering tank, it has been miniaturized!
Work anytime, anywhere! The soldering iron powered by a lithium-ion battery enables endless work.
A 3-axis control robot equipped with high-precision positioning and scalability.
A station ideal for research and development as well as light work.
Support your hands and relax to reduce fatigue! Optimize precision soldering work.
Free shipping nationwide in Japan, all products of the JBC brand are available for purchase! From the latest model compact stations to consumables.
Specialized in soldering technology. We handle proposal, development, manufacturing, and maintenance in-house.
Preheating, soldering, and solder withdrawal speed can be controlled!
Unifying coating and area laser soldering. Achieve space-saving and time-saving with this one machine!
Reduce pattern erosion at low flow rates! It can also accommodate soldering of long lead PCBs.
Achieving high quality and high stability through patented technology.
Achieve a stable temperature process! Capable of 3D implementation and accommodating three-dimensional structures!
Demonstrating capabilities in high-precision solder supply.
A separator that stirs and separates solder dross generated by an automatic soldering device.
Since ERSA, a German company, developed the world's first electric soldering iron, it has been loved in manufacturing sites around the world for its advanced technology and performance!
With technical data included, significantly reduces void ratio under a maximum pressure of 0.4 MPa. Improves process efficiency with rapid cooling. Compatible with fluxless soldering.
Improving productivity of pallet dips! Enhancing through-hole ups of "low Ag solder."
The pursuit of customer satisfaction leads to new technological innovations! Hiroki Tech products are born from a accumulation of cutting-edge technology.
High precision design with a printing accuracy of ±10μm supports narrow and narrow-pitch printing! By realizing 'hybrid squeegeeing,' we challenge the limits of screen printing.
Continuous inline transport suitable for mass production! High-performance vacuum reflow device with excellent usability.
A rich lineup is available! Detailed information about the features of Weller soldering irons is also included!
Device equipped with solder balls using vibration technology! Capable of mounting balls as small as φ80μm! For research and development, and small quantity sample production!
It is a high-frequency induction heating device for brazing the chip part and shank part of a gun drill.
This is a brazing heating device that allows anyone to perform brazing using high-frequency heating.
Nitrogen gas generation device using a permeable membrane.
It is an all-in-one selective flow system for small-batch production that performs "prefluxing," "preheating," and "soldering" all in one machine.
By adopting a cartridge heater in a lightweight and compact head, it is possible to insert the sleeve into narrow spaces of high-density mounted components.
We can accommodate a wide range from various prototype boards to mass production boards!
For those using a soldering device for the first time. Achieves an oxygen concentration specification of below 100 ppm and high stability. Improves thermal conductivity and realizes energy savings.
Achieving reduced cycle time and high productivity in an inline manner! A flexible, high-quality, low-cost soldering device.
Maximum processing capacity of 3,000 pieces per hour! Soldering processing capability has been accelerated, increasing by 25% compared to our conventional machines!
SMT printing machines (surface mount technology, board mounting, and mounters) capable of mask design and production to printing tooling for various printing applications.
High-performance stencil frame solution. Achieves excellent solder transfer efficiency in fine printing due to the long lifespan and stable tension of the stencil.
Clip Bonder - Die bonder for power semiconductors, chip and clip bonding, with optional appearance inspection and NG product punching unit support.
Super compact design at a low price! A function-oriented product developed with the user's feelings in mind.
A tabletop type selective flow suitable for a variety of products in small to medium quantities! A wide range of options available.
The solder diameter used is 0.4 to 1.6 mm, and the solder feed speed is 0 to 40 mm/sec!
We are engaged in environmentally friendly manufacturing using equipment and processes that minimize the use of CO2, solder, and VOCs.
Introducing all our equipment at once! We provide comprehensive services from prototyping to mass production for medical devices, hardware, and more.
We have over 10,000 types of components! From large-sized L dimension boards to the manufacturing of water-related (waterproof/drip-proof/dust-proof) product boards, we can accommodate your needs.
Flexible support from prototype to mass production with a 4-line jet DIP tank!
A breakthrough in the difficult implementation that had given up on reducing manpower and automation! Development of a soldering robot. Achieving both tact and quality!
All-in-One Type Rework Machine for Component Repair/Repair/Re-implementation - All SMT components with this one machine.
For those struggling with soldering in parts repair/repair/reimplementation! Compact and lightweight! A soldering device that thoroughly pursues performance, standards, ease of use, and stability.
[Parts Repair/Repair/Reimplementation] Rework System Capable of Supporting SMT Components with Underfill! Compatible with QFN and others. *Catalog available.
Rework visit demo ★ Underfill compatible SMT components can also be set up! All-in-one rework system *Catalog available.
This is a document that clearly explains "rework of printed circuit boards," which every engineer should know about.
Instant inclination without clamping! It is also used in three-dimensional measuring machines and microscopes!
From conventional large equipment to compact! Shortened time for solder melting!
Achieve astonishingly low prices! Soldering can be done on different materials such as glass and ceramics.
Even in outdoor work with cold air and strong winds, there is little change in chip temperature, allowing for a variety of heating operations!
Improved work efficiency with quick temperature recovery! A soldering iron that allows for precise temperature control during soldering.
Equipped with auto power down and auto power off features! The alarm setting temperature can be freely changed.
Introducing a controller with an alarm function! It features an adjustable recovery speed function!
Compatible with the BJ5 series soldering tips! The LA type soldering iron can be used even among densely packed electronic components.
Introducing a compact high-power soldering iron that achieves operability not found in conventional high-output types!
Compatible with terminals with large heat capacity! The LA-type soldering iron makes continuous work effortless.
Leakage voltage is below 2.0mV! The LA type soldering iron with high power model features excellent versatility and thermal tracking.
Introducing the LA-style soldering iron that allows for one-touch tip replacement and is capable of continuous operation!
The tip replacement is a one-touch exchange that simply involves inserting and removing the tip! It can also accommodate continuous work.
The tip replacement involves removing the heat dissipation nut and connecting the connector! It is compatible with all controllers.
You can turn the power ON and OFF while it is plugged into the outlet! The digital display allows you to easily check the set temperature.
Specifications for 2-wire and 3-wire systems are available! The temperature control status can be visually checked by the blinking of the neon lamp.
L-shaped grips can also be specially manufactured! By connecting the power plug of the soldering iron, you can achieve 10 levels of simple temperature control.
Introducing a compact and lightweight soldering iron with a simple temperature controller, ideal for attaching very small components!
Working on lamps and boxes is easy with the L-shaped grip! You can work at a suitable temperature anywhere, and it's also energy-efficient.