Achieving both heat dissipation and lightweight design! Plastic molded products for space environments with a focus on reliability.
Cable blades manufactured by AC Tasarim. We offer a wide range of products, including cable blades with easy-to-install tubes!
Using nanocrystalline alloy (nanocrystal) with high magnetic permeability as the core. For communication base station power supplies, in-vehicle chargers, and industrial equipment where miniaturization is required.
If you're struggling with 5G/L5G OTA testing environments, why not find a solution together?
No grounding required - zero leakage current! For inverter noise countermeasures.
A groundbreaking two-layer structure gasket provides noise shielding performance! Introducing a balloon-shaped product.
EMC shielded general-purpose aluminum case. A total of 387 sizes!
A noise suppression sheet that effectively suppresses high-frequency noise generated by electronic devices! It achieves high noise suppression effectiveness even though it is thin!
The SCF-X three-phase series is a toroidal coil designed using a nanocrystal core.
The corresponding frequency range is 30MHz to 1.5GHz/3GHz! PCB emission near-field probe type.
A panel-assembled shield room with double mesh on all sides to protect confidential communication.
It is a film with an ultra-thin special conductive layer.
40GHz wave compatible shielded tent! It can be considered for more specialized applications.
What is an EMC test? What is noise? A beginner's guide to perfectly resolving these questions!
Consistent production of die design, precision press processing, and plating.
This is an SMT clip with excellent elasticity, compressive strength, and conductivity.
It is a common mode choke coil with a wide range of characteristics.
It is a material that absorbs electromagnetic waves. It has excellent processability and is used for EMC/EMI countermeasures and improving sensitivity for RFID, etc. Free samples are available.
RF shielding tent compatible with up to 30GHz! A development environment for communication equipment aimed at the full-scale operation of next-generation communication 5G.
Supports 30GHz! Contributes to electromagnetic noise countermeasures in research and development.
It is a sample kit for RJ45 with a built-in LAN transformer.
Insulation sheets made of mica material, which has been used as an electrical insulating material for a long time. They exhibit excellent flexibility at room temperature and can be deformed as needed for use.
Ultra-lightweight cable blade "AeroBraid" that combines overwhelming lightweight design and high strength.
A rich lineup tailored for high heat resistance and electromagnetic environments.
Information on services for inspection and maintenance of high-frequency electromagnetic wave shielding products.
Achieve high electromagnetic wave absorption performance! We propose the optimal coating!
High water-repellent ability derived from fluorine! Strongly protects substrates and electronic components from water droplets, condensation, and humidity!
[New Technology] Non-silicone release film compatible with wide-width clean applications
【New Development】This type contains no silicone at all, yet achieves a light release of 250 mN/25 mm. It is also gaining attention as an alternative to fluorosilicone.
The test will be completed with one CDN.
Stick it onto the LCD for use. It has high transparency, so the screen doesn't get dark easily!
When the communication distance is shortened due to proximity to metal and it does not operate, it is used on the NFC reader side such as smartphones, digital health devices, home appliances, and in-vehicle devices.
Securely fix the wire! It is possible to ground conductive noise to the enclosure simultaneously.
It is a distant field resonance-type electromagnetic wave absorber (reflection attenuation type).
It is flexible and easy to handle! It can reduce the reflection of unnecessary signals.
★Packaging of embossed carrier tape for small components
【In Stock, Immediate Delivery Available】EMI Countermeasure Product ★ This is an EMI shield product made of beryllium copper.
This is an SMT clip with excellent elasticity, compressive strength, and conductivity.
A noise suppression sheet that effectively suppresses high-frequency noise generated by electronic devices! It achieves high noise suppression effectiveness even though it is thin!
The tape-type "FLEX SUPPRESSOR" NST/EST series, effective for countering radiation noise from cables, is now newly available!
The SC series is a toroidal coil designed using a uniquely developed ferrite core.
The SCF series is a toroidal coil designed using a nanocrystal core.
The SCR series is a toroidal coil designed using a uniquely developed high permeability ferrite S15H core.
The SCR-H series is a toroidal coil designed using a uniquely developed high permeability ferrite S18H core.
The SU series is a gear-type coil designed using a uniquely developed ferrite UU core.
The SSRH series is a gear-type coil designed using a uniquely developed high-permeability ferrite S18H core.
The SNG series uses a uniquely developed ferrite core. It is useful for noise reduction in ground wires and other applications.
It is a common mode choke coil with a wide range of characteristics.
Investigate and implement measures for causes that may lead to malfunction on the circuit board, such as SI analysis.
Frequency range: up to 40GHz! PCB emission near-field probe type.
The corresponding frequency range is up to 40GHz! It is possible to identify the location of the electric field source.
The frequency range is 10MHz to 10GHz! The gain is 30dB, and the input/output connectors are SMA(f)/SMA(m).
Identifying the source of noise is very important for EMC countermeasures and design!
Can be connected to a 50Ω input spectrum analyzer or oscilloscope!
Using high-resolution probes such as LF-B 3, LF-U 5, and LF-U 2.5 to detect interference sources more accurately!
The probe includes a current attenuator and has a built-in 50Ω impedance matching network!
Same basic structure as the "XF-R 100-1" and "XF-R 3-2" probes!
Low cost, high noise (150 < @1MHz)
It is a thin sheet-type electromagnetic wave absorption panel that is easy to process and attach!
[920MHz compatible] Lightweight and easy to cut and process on-site! It's the 'UHF radio wave shielding mesh'!
UHF-RFID null point, countermeasures against ghost reads with "UHF radio wave absorption panel"
It is a thin sheet-type electromagnetic wave absorption panel that is easy to process and attach!
Ideal for common mode noise removal and preventing malfunctions in system equipment.
A consistent performance management system! Responding to customer needs with innovation, tradition, and cutting-edge technology!
The high shielding effectiveness of aluminum foil reduces EMI noise. It is a shielding material that prevents malfunctions in automated equipment and electronic devices, supporting stable operation.
As a comprehensive manufacturer of thermal management and EMI/EMC materials, we produce high-quality products tailored to our customers' needs. Let's maximize the benefits for our customers.
Domestic production compatible products! Waterproof + EMC measures with two mountains! Introducing conductive, heat-resistant, waterproof gaskets!
Strongly compressing a D-shaped gasket from the side! Introducing a spearhead-shaped tube.
Introducing a square gasket with a two-layer structure consisting of a highly conductive surface layer and a non-conductive core layer!
Custom support available! If you need die-cut products for connectors, leave it to us.
Introducing a clip-type gasket that creates a high level of adhesion!
Domestic production compatible conductive, heat-resistant, and waterproof gaskets. Unique shape with two peaks for waterproofing and EMC measures! Proven track record in CATV equipment.
This is an introduction to a case where a round tube type was adopted for inspection equipment for communication devices!
No mercury used! We offer a combined solution for communication, signals, and power. Contact us now!
This is a connector for noise filters (EMI filters) and electromagnetic pulse filters (EMP filters).
Noise reduction for all electronic devices! Can be added later and can be customized to your preferred shape!
The core material is silicone sponge with excellent elasticity and resilience! Through two-layer extrusion molding, it enhances the adhesion to the casing while maintaining the sponge characteristics.
It is an adhesive tape coated on both sides with an acrylic-based adhesive on soft aluminum foil.
Top grade metal foil tape
Single-sided tape for protective film PET substrate.
This is a composite tape that combines a non-flammable aluminum foil as the base material with a film that has been treated to provide tearability.
We will exhibit at the International Medical Imaging Exhibition (ITEM2026) with MRI room-compatible LED Magluminas, emergency lighting, high-brightness LED Cathex, and more.
By simply sticking it to the source of electromagnetic waves and noise, you can counteract electromagnetic waves and noise.