Low price, short delivery time, connectors frequently used in amateur radio.
One-touch secure locking! Ideal for a wide range of embedded applications! Compact and requires no power or air!
Coaxial connector relay adapter, both sides BNC female, insulated panel mount type (impedance 75Ω)
Anyone can achieve the same tightening force! A connector with very high contact pressure.
Available for immediate delivery for trial evaluations! Compact and lightweight, yet maintains high reliability up to high frequencies with SMA connectors.
Adapter for connection and conversion between high-frequency/microwave coaxial connectors - Domestic processing available, even for small quantities!
This item is helpful for organizing the often complicated wiring between devices inside and outside of racks!
We always have beryllium copper alloy (bars and plates) manufactured by NGK Insulators, Ltd. in stock. We can accommodate small lot orders, offer short delivery times, and provide free samples.
High conductivity material with high strength and high hardness, beryllium copper. New material for semiconductor test probe pins and connectors.
10W 20W (DC) up to 8GHz N-type coaxial attenuator 3/4/5/6/7/10/20/30dB
This is a panel mount type connector for coaxial connectors.
Millimeter wave band 74GHz to 110GHz compatible. Easy to integrate into measurement systems with a straight structure type End-launcher.
It is approximately 30% smaller than SMPM Connectors. It is compatible with G3PO (Corning).
Supports high-frequency bands up to 145GHz in a board-mounted state with a 0.8mm connector! High-performance end-launch type connector.
SMA plug for relay use, panel jack, 3D white cable
SMA dual-end plug 1.5D white cable for relay use
Picking up products for mobile carrier's mobile base station construction.
Ideal for building and replenishing sulfamic acid nickel plating solution.
We have achieved burr-free pipe slitting processing by switching from cutting processing methods!
Environmentally friendly trivalent chrome plating can be done in barrels. For small parts, it can lead to cost reduction. First, please try a prototype and evaluate it.
End connections for stranded wire (compression) and solid wire (insertion) can be made in a space-saving manner.
We have also organized a series of 50Ω and 75Ω types, offering a variety of options.
BNC type connector plug! It supports a characteristic impedance of 75Ω and is compatible with 12GHz!
An easy-to-install and user-friendly locking mechanism with limitless applications!
The introduction of fixed mechanisms that can be remotely operated by various control devices such as PLCs. Ideal for integration into machinery, with limitless applications!
During the campaign, we are selling two types of SMA connectors at a special price. Please take this opportunity to try them out.
To fully realize the true value of beryllium copper, aging heat treatment is necessary. The products purchased from us will undergo heat treatment.
Perfect for aerospace applications! High strength and excellent wear resistance beryllium copper alloy.
High strength and high reliability. An ideal beryllium copper alloy for semiconductor manufacturing fixtures.
Achieving both high conductivity and high strength! Ideal for connector and probe pin applications. Lead-free and environmentally friendly.
Bio-net lock system! It is used for the transmission of video-related content such as surveillance cameras and inspection lines.
Next-generation compact coaxial connector with low PIM support - Standard connector for mobile base stations in Europe and the United States.
Independent SPINNER Corporation 1W to 50KW High Power Dummy Load
Coaxial connector conversion adapter BNC male - 4mm banana socket terminal x 2 (impedance unadjusted)
Coaxial connector adapter BNC female - SMA female (impedance 50Ω)
Coaxial connector conversion adapter SMA female - N-type female (impedance 50Ω)
Coaxial connector relay adapter N-type male to N-type female × 2 T-type branch (impedance 50Ω)
Multi-core coaxial connector for analog signals
PAVE-made hermetic pressure-resistant D-sub connectors. Micro D-sub and Nano D-sub options are also available, with a maximum of 200 pins.
Compliant with the RoHS directive! A wide variety of coaxial connectors with a proven track record in the EU region!
We can provide a solution that balances noise countermeasures within the device and compatibility with high-speed transmission standards.
A lineup of connectors, cables, and introduction terminals for each coaxial standard.
Formable and easy-to-handle test cable with minimal phase change.
A 3mm pitch coaxial connector capable of simultaneous connection for 8 poles. Compatible with microwave and millimeter wave (DC to 50GHz)!
60GHz to 92GHz band, easy to integrate with a linear structure type.
Simple control with only ON/OFF drive voltage for long lifespan.
Mounted on the circuit board only by screw fastening. Frequency range supported: DC to 110 GHz.
A soft and easy-to-handle cable that supports millimeter wave frequencies (DC to 65GHz).
Achieves stable characteristics with a side-launcher type in the 33-50GHz band.
A series covering the frequency ranges of the Q band, U band, V band, E band, and W band.
Cable assembly products covering the millimeter wave band (DC to 145GHz) frequency.
DC to 145GHz wideband 0.8mm to 0.8mm conversion adapter
Design and assembly of high-frequency coaxial connectors! Various custom products such as coaxial arresters and conversion adapters are also available! Example photo: Conversion adapter BFX20D-NJ.
In-house integrated production of design, machining, plating, various types of joining, and assembly. We offer total quality for mechanical components!
An electronic component manufacturer that conducts design and manufacturing with the keywords "high performance, high reliability, high quality."
SMA dual-end plug 3D cable for broadcasting
SMA dual-end plug 1.5DQEV cable for relay transmission
SMA plug for relay use, panel jack 3.5D cable
3DVW1 cable with SMA plug and jack for relay use
SMA plug for relay use, panel jack RO3D cable
SMA plug for relay use, panel jack 1.5D cable
SMA type coaxial connector waterproof coaxial adapter
Passed 10,000 mating cycle tests! Guarantees high reliability and quality throughout the product's life.
The conversion connector is a coaxial connector used to join coaxial connectors together.
This is a coaxial SMA cable for high-frequency measurements that supports a frequency range of 18 to 26.5 GHz.
Toconé BNC 50Ω connectors are available for immediate shipping, one piece at a time!
Toconé BNC 75Ω connectors are available for immediate shipment, one piece at a time!
Toconé N75Ω connectors are available for immediate shipment from just one piece!
This is a connector for triaxial cables, also known as triple coaxial cables. It is used for noise reduction in microcurrent measurement instruments.
Reliable coupling is possible with a screw coupling method! The opposite side of the fitting connects to a coaxial cable.
To everyone looking for harness processing for thin coaxial connectors! We can process 21 different types.
A flexible microwave cable assembly that can provide excellent electrical and mechanical performance.
Supports frequency bands up to 18GHz, offering lightweight and dustproof, waterproof performance.
Lightweight low-loss flexible microwave cable assembly for spaceflight systems and aerospace systems (aircraft, helicopters, missiles).
ABB's Shield-Kon is a patented, simple, quick, and safe solution for noise interference.
Consistent production of die design, precision press processing, and plating.
SMA type magnet base, cable length and connector selectable.
Among practical metals, silver (Ag), which ranks first in electrical conductivity and thermal conductivity, is used for plating.
Q. Can silver plating be done in a barrel? A. Yes, it can. With barrel plating, it is possible to achieve silver plating on shapes that are prone to overlapping or bending.
Excellent solder wetting properties, with no worries about whisker formation! ~The appeal of this product revealed through comparisons with tin plating and tin alloy plating~
High durability BNC connector, high quality, made in Japan, priced at international rates.
High durability BNC connector, high quality, domestically produced, price is at overseas levels.
BNC connector receptacle, made in Japan at overseas prices.
BNC connector receptacle, high quality, made in Japan, price is overseas price.
We can accommodate a wide range of variations to meet all needs.
This is a screw-in type connector suitable for medium coaxial cables.
This is a connector that has been made screw-fit type for BNC connectors.