A sheet primarily composed of alkali Earth Silicate fiber (AES fiber/biocompatible soluble fiber), that possesses heat resistance up to approximately 1100°C to 1300°C.
After adding the necessary moisture and mixing thoroughly, it will become a slip! Properties almost identical to the bonded refractory material can be obtained.
It is a highly adhesive film that can withstand a certain degree of deformation and forms a gray, hard coating.
New proposal for CUI prevention. Insulation and cooling material exterior using adhesive sheet/tape method with multilayer film substrate. (5-layer type)
Ideal for waste liquid incineration!
High insulation ceramics that can be used up to approximately 1500℃. For thermocouple protection tubes and insulation tubes.
Stable particle size distribution and air permeability, high fire resistance! Japanese-made artificial ceramic sand.
Key devices for optical communication technology! Capable of development and mass production through processing from raw materials!
All-rounder "This is Pax" fireproof (heat-resistant) repair material "ELPAX" for repairs in high-temperature environments, equipped with both offensive and defensive capabilities!
It is used to strengthen the surface of high-temperature insulating wool products with a liquid inorganic hardener that disperses ultra-fine particles of anhydrous silica in water.
A cermet material that combines the hardness of ceramics and the toughness of metals!
Please consider the zircon sand from South Africa and Australia as a BCP. It can be crushed in-house in Vietnam and supplied as flour.
This is a fibrous mineral utilized in various binders and thickeners, taking advantage of its excellent adhesive properties. Please consider it as a source for reducing reliance on China.
A binder specialized for dry press molding with water-soluble acrylic.
Microhole ceramics produced by extrusion molding.
Production is possible from just one piece! We provide comprehensive support from material formulation to molding, firing, processing, and inspection.
The definitive version of a high-performance, ultra-short delivery, industry-leading, ultra-low-priced small electric furnace!!
High performance! Insulation and heat dissipation sheet with excellent high-temperature characteristics!
Laser light does not reflect, making it safe! Ceramic honeycomb suitable for processing heat-sensitive workpieces.
Ultra-high temperature application "Yttria Crucible"
Outer diameter φ0.3mm to φ8mm, minimum hole diameter φ0.02mm, capable of producing fine ceramics.
This is a high-performance multi-seal cover tape!! Conductive type, multi-seal (PS, PC, A-PET), transparency.
A crucial part for upgrading the overall performance of the device, where ceramic thermal spraying demonstrates its true value!
Excellent insulation effect, ideal for CUI measures, helps with energy saving and space saving.
Water-resistant, chemical-resistant, and oil-resistant. Ideal for cost reduction with low specific gravity! Polyethylene sheets with excellent cushioning and smoothness.
Inorganic foam made from industrial by-products.
Dielectric resonator (TE, TM modes)
Isolite Industries' original fireproof insulation technology: biocompatible dissolvable fiber (AES wool) board, compliant with RCF regulations.
FiberMax (Alumina Fiber) - High heat-resistant lightweight insulation board that utilizes the properties of PCW (Polycrystalline Fiber).
Developed a 3mm PCW (polycrystalline fiber) blanket with excellent heat resistance and the ability to maintain high fiber strength even at high temperatures.
Cuttable ceramics. Selling shaped plates with high thermal conductivity and high insulation.
Machinable ceramics that allow for various precision processing with short lead times.
It can be used as a substitute for petalite!
Si3N4 AMB substrates have a maximum thermal conductivity of 130 W/m·K. AlN AMB and DBC substrates are also available. Samples can be provided in as little as 2 weeks from an order of 5 pieces.
This is detailed information about the category of micro-sized fused silica fillers.
It is possible to manufacture fine-pore ceramics with a minimum aperture of φ0.02mm and dimensional accuracy of ±5%, making it suitable for miniaturized sensor holders and flow control components.
A high-performance, compact electric furnace capable of rapid heating to 1,500°C in just 30 minutes, featuring a front-loading door for easy sample extraction.
Enable usage in environments up to 1600°C
Introducing our processing examples of materials such as quartz glass, zirconia, and silicon carbide!
Various impregnation support, mass production press support, short delivery time possible with domestic processing, special materials (composite materials & ceramics) support.
Utilizing high heat resistance and Mohs hardness, it can be used in a wide range of applications such as refractory materials and friction materials!
Non-halogenated sulfonic acid-based flame retardant specialized for polycarbonate.
High thermal conductivity × electrical insulation × low Dk/Df. Surface-modified products with low viscosity and high dispersion, suitable for CCL and TIM.
Used in 40 countries worldwide! A ceramic filter effective for the purification of molten metal.
We handle various adhesives, processing materials, civil engineering and construction materials, etc.!
[Nanotech2026 December Exhibition] A new heat dissipation filler that combines high thermal conductivity and chemical stability, featuring a rounded shape that excels in fillability and fluidity.
This is a high-performance multi-seal cover tape!! Conductive type, specifically for PS and PC carrier tapes, with high transparency.
This is a high-performance multi-seal cover tape!! Conductive type, specifically for PS and PC carrier tapes, with ultra transparency.
One solution for heat, cold, noise, and odor prevention! Insulation, heat shielding, soundproofing, and deodorizing paint.
We can comprehensively support the SiC chain, not only for SiC wafers but also for raw materials, product design, and SiC power devices.
High purity with extremely low silica content! It has thermal properties close to metals and is also excellent as a refractory material.
Specific gravity and water absorption are completely adjustable! It can also be effectively used for rainwater utilization.
Aluminum nitride filler, a thermally conductive filler developed by applying technology cultivated in ceramic substrates.
Antenna block, circuit board
A new insulation module that can withstand temperatures above 1000°C, featuring high durability, energy efficiency, ease of use, and convenience. It has high density and excellent insulation properties, optimizing the temperature inside the furnace.
We offer high quality at low prices. Leave it to us for all your ceramic fiber needs.
Pursuing customer convenience through consistent production, processing of various types and one-of-a-kind items, and prototype processing.
Light as aluminum, strong as steel! Comprehensive catalog of composite materials "MMC" now available.
Japan Fine Ceramics offers optimal solutions from a rich lineup of various ceramics to composite materials.
We will introduce the achievements of ceramicizing molds and their benefits.
A wide variety of ceramic products, including dense products such as alumina and zirconia, as well as 99.8% high-purity fused silica molded products, are featured! We also accommodate small lot contract processing.
The raw material SiC is carefully selected and strictly classified by particle size during production.
Isowool BSSR blanket is a product made from biocompatible dissolvable fibers (AES wool) that is not subject to RCF regulations, formed into a blanket shape.
Bulk (cotton-like) products
This is a joint filling material for ALC panels made from IsoLite Industrial's IsoWool BSSR, which excels in fire resistance and workability. It is not subject to RCF regulations.
High-temperature wet-type amorphous refractory insulation material from IsoLite Industries, specializing in insulation technology. Not subject to RCF regulations.
New addition to the ultra-low thermal conductivity material LTC series: the flexible LTC-FL.
Insulation blanket that achieves ultra-low thermal conductivity and shot reduction.
Cuttable ceramics. Selling shaped round bars with high thermal conductivity and high insulation.
Blending technology, grinding processing, quality control, product development! Proposals for unique technologies and manufacturing methods.
Canceling the thermal expansion of resin! A material developed in academia that solves dimensional deviations, warping, and characteristic changes in precision assembly products.
It is characterized by having few impurities!
We use high-purity silica sand sourced from Australia as the raw material, standardized to a purity of 99.3% or higher.
Ideal for industrial use! High-purity niobium pentoxide from Brazil (99.7%) with stable supply available | Electronic components, catalysts, ceramics, metallurgy, optical glass
This is detailed information about the category of crystalline silica filler, wet ground products.
Adding a small amount of MgO suppresses abnormal crystal growth! It exhibits excellent volumetric stability at high temperatures.
Achieving stable high strength in the Fran process!
Finally, high-strength ceramic beads that correspond to inorganic processes have arrived!
The new possibilities of silicon carbide where imagination takes shape.
Ceramic Label for Sanitary Ware 【Cerala LabelⓇ Green】
Strength, hardness, thermal stability, chemical resistance, and more! Essential materials that support innovation.
Explaining the material characteristics of GaN and how they relate to its practical performance advantages in power electronics!
Can be heated up to 2800°C in a vacuum or inert gas atmosphere! Customization available!
Achieving small flat gears through fine ceramics extrusion technology.
Microporous ceramics: Capable of producing pores with a minimum diameter of φ0.02mm. New possibilities opened up by pilot microporous ceramics.
Fine-pore ceramics usable for sensor insulators and microflow control.
A ceramic tube suitable for the molding of thin-walled tubes and pipes with fine holes. It is also compatible with the molding of multi-hole tubes and lattice-shaped cross-sections (honeycomb structures).