High reliability, compact, and lightweight! 5-phase AC power micro-stepping motor driver.
Compliant with RoHS directive! 2-phase microstep driver that has obtained safety standard CE.
A stepping motor driver equipped with a smooth function that eliminates vibrations in the low-speed range.
The astonishing specifications that overturn the common knowledge of stepping motors.
This is a commonly used size 4 stepper motor. Please feel free to use the free sample.
Supports 25 types of high division numbers from 1/1 to a maximum of 1/100! Usable within a wide power supply voltage range of DC 15 to 36V.
Wide power supply voltage range of DC12 to 40V, compatible with 5-wire motors! Equipped with excitation timing signal strength.
Continuous forward and reverse rotation is possible! It achieves smooth direct drive from ultra-low speed to high speed.
The weight is approximately 100g! Introducing the 2-phase micro-stepping stepper motor driver.
Equipped with an automatic power-down function when stopped! It uses a bipolar constant current method for the two-phase motor.
Adopts a unipolar constant current method for a 4-phase motor! The step angle can be switched via a switch.
We offer a variety of profiles including straight lines, cycloid curves, cam curves, and CP!
Achieves smooth motor movement even during rapid speed changes and overloads! Additionally, it improves operational efficiency with performance suitable for the equipment.
Next-generation standard compatible with Raspberry Pi! It can achieve both reduced prototyping costs and shortened development time.
Reduce power consumption by 80%! An electric gripper that balances the "delicacy" of a fingertip with the "precision" of a machine, easily grasping semiconductors and glass.
RS-485 serial communication model. Due to its simple communication format, software development is possible without special knowledge of networks.
CE compliant and RoHS compatible 5-phase stepping motor driver with DC 24V input, 1.2A/phase, 1.8A/phase, 2.4A/phase.
Unipolar/bipolar drive and single-axis/dual-axis types, with a rich lineup!
Custom design and development of compact, high-torque small motors with low-cost production!
Reduction of startup and debugging time! Achieving optimal performance of the equipment and increasing operational efficiency.
Catalog featuring only gearboxes for PM-type and hybrid-type stepping motors.
Introduction of "Catalog Standard Stock Items" for small lots, individual packaging, and short delivery times! Includes a proposal document for recommended application examples.
User-friendly standard stepping motors of 20, 25, 28, and 35 mm! CAD available for download!
Hybrid stepping motor with optical encoder! CAD download available!
Aren't you choosing a stepping motor based only on size?
A systematic explanation comparing the differences between stepping motors and servo motors!
Over 80 products of PM type stepping motors are lined up! You will find the perfect one!
We present materials comparing closed-loop control and open-loop control using optical stepping motors and anti-stall control!
Presenting the hybrid stepping motor 'lineup chart' from MinebeaMitsumi! The catalog is also available for bulk download!
Hybrid stepping motor with optical encoder (SZ series)!
We present the hybrid stepping motor "Catalog Utilization Manual: How to Choose a Motor - Beginner Level"! You can also download the comprehensive catalog and others in bulk.
Aren't you choosing them somewhat randomly? An explanation of the differentiation of stepping motors with encoders from the perspectives of "history," "advantages," and "comparisons."
Ideal for devices equipped with a microscope and low-floor space! XY axis stage that can also accommodate transmitted illumination.
Reduction of drivers is possible with decentralized control! An integrated servo system that achieves slimming down.
It is a DC motor brand from Germany and Switzerland. We provide pioneering, high-performance, and highly reliable micro drive systems worldwide.
Connector type geared stepping motor with easy lead assembly and compact size.
Small φ20, high thrust 900g with precise position control (25 μm/1 step is possible).
It is a compact and high-performance stepping motor driver. Maximum output: 4A, high resolution: 100,000 pul/rev.
A hollow motor optimized for high-precision positioning, incorporating a high-resolution encoder that utilizes the hollow shaft.
Significantly reduces motor heat generation and low vibration. Available in two types of drivers: line driver type and open collector type.
The FPGA adopts a fully digital control multi-axis driver. It achieves cost reduction without compromising performance. It maximizes the capabilities of the motor.
FPGA adopts AE-LINK compatible fully digital control multi-axis driver. Since it has a built-in driver in the controller, positioning units and other components are unnecessary.
Slim and compact. It will now be possible to use it in small spaces where electrification has been difficult until now.
A comprehensive catalog featuring a wide variety of two-phase microstepping drivers with pulse input types available from various manufacturers.
Even more compact and lightweight than before! Custom design tailored to your needs is also possible!
Compliance with overseas safety standards (UL certification) / CE compliance
Adopts a low heat generation circuit to suppress driver heating! Compact driver with a maximum driving current of 2.8A per phase.
It is a high-performance product that incorporates functions such as a self-test circuit and an automatic current down circuit.
It is a 5-phase stepping motor driver with an input of AC100V to 115V and a drive current of 0.35A/phase to 1.4A/phase.
It is a 5-phase stepping motor driver with an input of AC100V to 230V and a drive current of 0.35A to 1.4A per phase.
DC 5V single power supply, constant voltage drive! Up to 250 divisions (125,000 pulses per revolution) of microstepping is possible.
It is a 5-phase stepping motor driver with an input of AC100V to 115V and a drive current of 0.5A to 1.4A per phase.
It is a 5-phase stepping motor driver with an input of AC100V to 115V and a maximum drive current of 2.8A per phase.
It is a 5-phase stepping motor driver with an input of AC200V to 230V and a maximum drive current of 2.8A per phase.
The standard model of the S series, which has achieved a 40% reduction in size due to the new design.
Compact! Low price! Low vibration, multi-axis one-board type 5-phase stepping motor driver "S Series"
Achieved a 40% (area ratio) resize with the new design!
Incredible low vibration! It is suitable for embedding in small, lightweight devices that dislike vibrations.
Lightweight and compact, perfect for equipment integration! DC 24V input, driver with a maximum drive current of 0.35A per phase.
Ideal for embedding in lightweight, compact devices that dislike vibrations! Driver for ultra-compact micro-stepping with a drive current of 0.35A per phase!
A DC power supply with AC-like high precision and high torque V-up driver, contributing to cost reduction and miniaturization of equipment.
New models added! A variety of high cost-performance models that achieve compact size and low price are now featured.
Achieve high-performance and space-saving positioning with a 24mm ultra-compact planetary gearhead and stepping motor joint! Ultra-compact 24mm planetary gearhead.
Five-phase stepping motor that contributes to reducing total costs.
A synchronous motor capable of low-speed operation with only a capacitor.
The LJ Linear Head can be mounted on a parallel axis gear head + motor. It can perform linear movements such as pushing, pulling, lifting, and lowering.
The functions of the AZ series remain unchanged, with the motor cable and sensor cable combined into one.
A stepping motor is a motor that rotates in proportion to the number of pulse signals.
A stepping motor is a motor that rotates in proportion to the number of pulse signals.
A motor that converts rotational motion into linear motion inside the motor!
In-house event! You can view product information, demo videos, materials, and CAD data downloads all in one place.
We offer PM type and PM type with built-in reduction gear! Custom options are available for reduction ratio, output shaft shape, and code connector specifications.
A trading company specializing in precision parts with over 30 years of history.
Sales agent for a top-class manufacturer of small precision motors and materials in the industry!