Spectrum's AWG (Arbitrary Waveform Generator) with a resolution of 16 bits, a maximum sample rate of 125 MS/s, and a maximum bandwidth of 70 MHz.
A noise figure analyzer capable of characteristic evaluation using LO control and IF control with a dedicated GPIB.
It is possible to multiplex up to 8 TS (Transport Streams) using an MPEG2 TS multiplexer (MUX) for terrestrial digital broadcasting.
An ideal combination of performance and usability in a compact size. A signal generator that combines signal quality, output power, and ease of use!
It is possible to operate and monitor voltage and current settings.
Converts analog voltage, pulse signals, and setting data into CAN signals. <New Product Information> CAN FD TOOL is receiving great acclaim!
Ultra-compact design allows for installation in spaces with no room, thanks to its slim design!
Detailed information on remote control and remote operation of the product!
Detailed information on accurate measurement of high-speed digital signal lines using setup examples!
From 1.6T optical modules to CPO and SiPh, everything for BERT evaluation in one device.
Adopts an output circuit suitable for capacitive loads! Signal generator for LCD cells that can supply stable signals.
30MHz to 100MHz, 500MS/s, 10M points, 2-channel arbitrary waveform generator
Designed to inject electromagnetic pulses into safety-critical circuits with high temporal and spatial resolution.
High Dynamic Output Power RF Signal Generator
Next-generation synchronous resolver signal generator. Suitable for the development of hybrid systems.
World-class high-performance pulse generator
By offering products with special features, we are able to delight our customers!
W thermocouple for high temperature measurement
Stable calibration is possible while checking with the digital panel!!
A specialized information site for measuring instruments that gathers all kinds of information related to measurement and measurement.
Ideal for RF signal testing of general infotainment systems, with the ability to easily expand functions to accommodate changing test needs.
Powerful solutions for RF signals
Accelerate the design of RF products with the powerful and cost-effective state-of-the-art RP-6100RF recorder.
It is possible to reproduce real environment RF signals without conducting demodulation and amplification tests of the RF receiver.
Standard equipped with GPS, GLONASS, QZSS, and IMES.
The DARC method and RDS (RBDS) method for FM multiplexing can be done with a single unit!
Introducing an FM multiplex signal generator that can output DARC (RTIC) and RDS (RBDS) multiplex signals with just one unit!
It is a portable multifunction signal generator capable of PWM pulse output.
It is a cost-effective signal generator that can output up to 25 MHz in the series and can also output arbitrary waveforms.
AWG Network Box that can be easily connected to desktops and laptops via Ethernet and can be easily used from the included GUI.
Convenient to use because it is battery-operated! Improved display clarity with the adoption of an organic EL display (OLED).
Trust in the product! It can be used for measuring intermodulation/interference distortion and signal strength.
SIGLENT SDG1032X 30MHz Arbitrary Waveform Generator
High functionality and versatility at a low price! Entry model of SIGLENT Technologies signal generator.
[Demo unit available for loan] A palm-sized function generator ideal for learning and educational purposes.
Visualize equipment anomalies through text, sound, and vibration! In addition to individual alerts, mass notifications in emergencies are also possible.
Compact the necessary functions and place them on your desk! Connect the USB cable to your computer, and it operates with USB bus power!
Tester for small and lightweight digital radios (4-level FSK, π/4QPSK)
Compact the necessary functions and place them on your desk! Connect the USB cable to your computer, and it operates on USB bus power!
Compact the necessary functions and place them on your desk! Connect the USB cable to your computer, and it operates on USB bus power!
We will introduce a case of developing a device that monitors whether the current flowing through the electric welding machine is within the specified range.
This is a safety device for digital signals with a terminal block featuring a clear panel (BCD signal arrester).
Effective in various locations where GPS signals cannot be received! Can be applied to a network synchronized with GPS worldwide.
It is capable of generating SBAS signals, white noise, and multipath simulation functions!
A three-phase AC signal generator that can be used for the development and testing of power conditioners in combination with our PV simulation power supply.
Signal analyzer/vector signal analysis equipment suitable for transmission and reception analysis of mobile communications such as LTE.
MIMO receiver tester capable of verification under real environment conditions.
Equipped with a feature that allows for easy creation of wireless LAN (802.11a/b/g/j/p/n) waveforms!
Can be used for evaluating signal sources such as voltage-controlled oscillators (VCO) and clock generators!
It is possible to connect to the object being measured with 2.4mm and 3.5mm coaxial connectors!
It can also be powered by batteries, allowing you to carry it and measure in various locations.
It is possible to replace the internal HDD with a more reliable SSD (Solid State Drive).
A signal generator compatible with the multimedia broadcasting "ISDB-Tmm" system. It can generate signals for 33 segments compatible with ISDB-Tmm.
A BS digital signal generator ideal for pre-verification of content and stream monitoring.
BER measurement device compatible with advanced broadband satellite digital broadcasting transmission method (Advanced BS).
Professional receiver compatible with terrestrial digital broadcasting. Converts terrestrial digital broadcasting signals to TS.
A BER (Bit Error Rate) measurement device that enables the measurement of the BER of a digital TV tuner.
A low-cost BER (Bit Error Rate) measurement device that enables the measurement of BER for digital TV tuners.
A jamming wave generator capable of conducting adjacent interference tests and co-channel interference tests for terrestrial digital broadcasting (ISDB-T). It can generate up to 8 jamming waves.
It is optimal for adjacent interference tests and co-channel interference tests of terrestrial digital broadcasting (ISDB-T). In addition to digital signals, analog signals can also be transmitted.
This is a fading simulator capable of evaluating multipath in terrestrial digital broadcasting.
It is a fading simulator capable of receiving diversity tests up to 4 channels.
A transmitter compatible with terrestrial digital broadcasting, supporting full seg and one seg. Usable for self-broadcasting, area one seg, and digital signage.
A transmitter compatible with terrestrial digital broadcasting, suitable for self-broadcasting and digital signage.
It is a terrestrial digital signal generator compatible with MPEG2-TS IP transmission input.
It is a real-time H.264 encoder for One-Seg broadcasting, ideal for area One-Seg.
A BER (Bit Error Rate) measurement device that enables the measurement of the BER of a digital TV tuner.
DTV signal generators compatible with digital television broadcasting in countries around the world.
High-precision control! An RF/microwave signal generator boasting high signal quality and astonishing output power.
We have achieved excellent level accuracy and reproducibility.
Uncompromising excellent performance. Achieves class-leading signal purity and output power.
A vector signal generator with comfortable operability via a 7-inch touchscreen.
A vector signal generator suitable for generating high-quality and complex digital modulation signals.
Due to the high sensitivity to phase noise, a phase noise analyzer is suitable as a measuring instrument.
We have achieved excellent level accuracy and reproducibility.
High-speed and simple power amplifier testing is possible; complex test setups are not required.
It provides a detailed explanation on the use of the conversion loss table included with each analyzer.
In addition to technical processing, we also provide information about the application.
Publication on the differences in intermodulation distortion measurements using a new spectrum analyzer.
Publication on the evaluation method for the effective bit count of R&S RTO digital oscilloscopes.
It includes concepts such as noise figure measurement that does not require a standard noise source.
Instructions for setting up the measurement of the spectrum of the measured object are provided.
A concise summary of basic tips and information regarding SCPI programming.
Detailed information on how to establish a high-speed remote control connection is also provided.
We will introduce how to achieve the setup of the E-/W-band.
It describes the generation and analysis of V-band signals up to a modulation bandwidth of 500 MHz.
Presenting actual examples to explain the analysis process! Introducing the analysis method for EMI issues.
Enables high-speed and accurate TD SVSWR measurements in accordance with ANSI C63.25.
Great potential in small things.
Supports 8K Super Hi-Vision testing! Reduces programming man-hours with an easy-to-use GUI.