A single device that detects gas, partial discharge, and temperature anomalies! An acoustic imaging camera equipped with a thermal thermometer.
Size adjustable! A fully wooden table with excellent design for EMI measurement and BCI measurement.
Supports maximum DUT size of 30cm! Small reverberation chamber with stirrer.
The larger head allows for the detection of larger components as potential sources of interference!
Simultaneous measurement of static electricity at five locations is possible! The range can be switched to accommodate a wide variety!
You can choose from small fan types to bar types according to your needs.
Static electricity visible! Real-time monitoring of static electricity that cannot be seen with the naked eye!
Automobile testing compatible with TWC testing method!
Broadband RF optical transmission device usable up to 3.5GHz.
For those struggling with complex multi-phase drive signals and micro-ripple measurements! Achieve significant reductions in development time by simultaneously observing all phases with 8 channels and 500M memory.
Digital display of static electricity of plus or minus 200 kV with an accuracy of ±2%.
It is an electrostatic voltage measuring device that can connect up to two sensors.
DUT is a radar module! It features a wide frequency range (2 to 500 GHz).
Simultaneous measurement of up to 8 DUTs is possible! It is also possible to identify and manage the DUT and the chamber.
Functions well within a distance of 0.5 to 10 mm on the assembly! Same basic structure as the "XF-E 09s" probe.
Can be connected to a 50Ω input spectrum analyzer or oscilloscope!
Detecting the uneven magnetic field entering the probe head surface without detecting the magnetic field lines entering from the side!
The lower electrode surface of the probe head is approximately 5x5mm! It detects the separated electric fields on the surfaces of clocked lines and ICs.
It has the same basic structure as the "RF-E 02" and "RF-E 05" probes, but with higher resolution!
The larger the tip diameter, the higher the sensitivity, allowing for the detection of a wider area of the magnetic field!
It is compact and very easy to use, and it is also electrically well shielded due to the current attenuation sheath.
Please use the correction data to convert the probe's output voltage into either the magnetic field or the current flowing through the conductor.
Equipped with a very small and high-resolution probe head, it is suitable for measuring RF magnetic fields up to 6 GHz.
Check if the important parts are charged with static electricity! We guarantee accuracy even after repeated use.
Test the operator's grounding path of 750kΩ–35MΩ! This will determine if the wrist strap is functioning properly.
Testable during regular operations! A compact and portable checker for wrist straps.
[Product number: 19270]! With stand [Product number: 19271]/ Stand only [Product number: 19272] is also available.
ESD TR12-01 Dual Wire Wrist Strap and Constant Monitor for Workbench
Made in America and high quality! It has a scale on the side, making it convenient for measuring the length to cut.
For pump caps with a screw-in size of 38-400! Available in orange, green, blue, and yellow!
Testing for high-frequency surge resistance of automotive electronic components is possible! Used in combination with decoupling coils.
RF radiation immunity testing (radiated electromagnetic field immunity testing) is a breeze! There is a very easy and convenient simple testing system available.
High voltage up to 100kV, high frequency of 100MHz, long cables up to 30m.
Capable of measuring up to the 6GHz band! Fully compliant with CISPR 22 regulations.
The MK series is a compact ESD testing device that supports multi-pin devices.
Easily create test patterns! Testing equipment equipped with humidity control function.
Surface resistance measurements can be performed quickly. Measurements can be conducted in accordance with various standards (such as ANSI/ESD).
●Easy identification of LAN, coaxial, control, and power cables from the surface of the insulation ●Safe, secure, and easy operation
EMC Tester Power Harmonics and Flicker Measurement Device
There are two types of sensors: clamp type and flexible type, and they do not depend on the shape of the object being measured.
It is possible to measure noise that could not be captured by the spectrum analyzer.
Isn't there noise coming from that LED? I can help visualize the noise.
We are offering a comprehensive catalog of static electricity removal devices! This is a complete series of static electricity removal devices for industrial and cleanroom environments!
Industry-leading 50kV output static electricity generator with a unique effective discharge count function.
This is a separated type with [1 sensor × 8 units] that enables electrostatic measurement in narrow spaces. It is suitable for various environments such as line processes with real-time measurement.
Portable ESD testing device with integrated discharge gun and battery.
We offer impulse noise testing, noise terminal voltage measurement, and environmental testing (temperature and humidity)!
Adopted in civil machinery, automobiles, and the military field! The keywords are "high output," "broadband," and "low power consumption."
An electrostatic testing machine with an integrated test instrument body and discharge gun.
A long-established manufacturer of EMC accessories and generators used in military product testing and automotive testing.
The only one in the industry! Test equipment compliant with DO-160 Section 22 Level 3 and MIL-STD-461G CS117.
A test device that complies with MIL-STD-461G and DO-160 in a single unit. It significantly reduces the time required for manual testing.
Damped wave vibration test machine compliant with IEC 61000-4-18 and IEC 61000-4-10.
RF optical transmission device usable from DC
RF optical transmission device that can be used from DC
Equipped with a radio wave anechoic chamber and a shielded room! Test personnel will handle everything from device setup to measurement!
For those struggling with power sequence evaluation of FPGA boards! Achieve synchronized verification with high resolution and large capacity memory for all channels, reducing design workload.
For those struggling with intermittently occurring noise issues! Achieve a reduction in countermeasure time by tracking noise sources with ultra-fast FFT analysis over 45,000 times per second.
For those struggling with long-term verification of in-vehicle circuits and debugging with actual power supplies! Achieve efficient evaluation by capturing issues with multi-channel simultaneous synchronization and large-capacity memory.
The static stick pen is a simple measuring device for static electricity and various deionizers.
It is a high-precision surface voltage measuring instrument.
For customers looking for an anechoic chamber in the Kansai region, we offer EMI countermeasure facilities at reasonable rates (from 110,000 yen per day) for EMC, EMI, and noise.
Impedance, undershoot, etc.! We publish know-how shared by our engineers.
Completely customized to your requests! We propose suitable sizes according to your usage and installation location.
The system is upgradeable and modular! It can keep up with future technological advancements.
Ultra-fast test model! Fully automatic measurement with a portable design featuring casters.
Long type, 2-way cross type, large type, etc.! Customizable options available.
The XF series magnetic field probes have a built-in 50Ω termination resistor!
Ideal for measurements close to components with high magnetic field strength!
Detecting magnetic field lines radiating at a 90° angle from the measurement target!
Can be connected to a 50Ω input spectrum analyzer or oscilloscope!
Compact and very easy to use, and with the current attenuation sheath, it is electrically well shielded!
The current attenuation sheath provides a solid electrical shield!
The larger head allows for the detection of larger components as potential sources of interference!
Suitable for measurements close to components in high magnetic field strength!
The "RF-R 50-1" and "RF-R 400-1" probes have the same basic structure, but with much higher resolution!
A compact and very easy-to-use near-field probe from Langer!
Can be connected to a 50Ω input spectrum analyzer or oscilloscope!
Bring the underside of the probe head close to the object being measured and detect the emitted electric field!
Can be connected to a 50Ω input spectrum analyzer or oscilloscope!
It has the same basic structure as the "RF-E 02" and "RF-E 10" probes, but it detects electric fields in a very narrow range!
The same basic structure as the "RF-E 03" and "RF-E 04" probes!
You can approach difficult-to-access printed circuit boards, etc., that are sandwiched between components from above!
Can be connected to a 50Ω input spectrum analyzer or oscilloscope!
During measurement, place the probe head gap on the object being measured!
Half-circular magnetic field lines are generated along the edges of linear, rod-shaped components, cable connectors, and flat structural parts.
Each microprobe has a built-in preamplifier! The delivery includes correction data.
Equipped with a very small probe head that functions like a coupling clamp, it is suitable for measuring RF magnetic fields up to 6 GHz.
Equipped with a very small and high-resolution probe head, it is suitable for measuring RF magnetic fields up to 1 GHz.
Equipped with a very small probe head that functions like a coupling clamp, it is suitable for measuring RF magnetic fields up to 1 GHz.
Langer Corporation also manufactures special-shaped near-field probes according to customer requirements!
Faster sweeping and measurement are possible! Sensitivity improves by about 20 to 30 dB.
Power is supplied through the included plug-in power unit! The near-field probe is connected to the input of the preamplifier.
The frequency range is 100 kHz to 3 GHz. Introducing a preamplifier for EMC probes.