Easily operable even in high or narrow spaces! Lightweight and compact building research adhesive strength tester.
Introduction of an external supercharger for engine bench testing.
Explosion-proof constant temperature chamber used for testing various hazardous materials! Equipped with all safety measures!
Multicolor light sensor measurement method using spherochromatic lenses
Detailed explanation of the test overview of CISPR25 Ed.4 2016 (for automotive equipment).
Connect to a solar cell and operates at the maximum operating point (Pmax). It can track the maximum power point under various solar illumination, angle, and temperature conditions.
Introducing the torque sensor. It is a rotary torque sensor. It is an amplifier-integrated torque sensor. The output is ±5V.
Compliant with JIS P8117! Easily measure the air permeability of various sheet materials in a short time with simple operations.
Introducing the heat seal tester widely used for heat and pressure resistance testing of films, inks, and adhesives.
Applicable for spring water pressure testing! It can be attached to the water level measurement pipe, allowing for the valve to be instantaneously opened at the start of the test.
This is a portable adhesive testing machine that measures the adhesive properties (tack value) of non-sulfurized rubber, adhesive tapes, and the like. It allows for easy measurement of the adhesive strength of materials on-site.
The subject oil type is heavy oil! A test to measure the mass of fine particulate contaminants in heavy oil A.
A self-weight scale tester that allows for easy performance inspection and adjustment of self-weight scale meters!
Protection Relay Tester Multi Relay Tester
A detailed explanation of the test overview of ISO 7637-2 Ed.3 2011.
Engine cylinder pressure measurement! No need for measurement hole processing!
RAMAN-QE is a modular Raman system based on a compact fiber spectrometer equipped with a back-illuminated CCD detector and high sensitivity.
Mix dozens of small samples in a single day! Reduce time and costs! A small extruder that achieves results similar to large equipment with a bypass loop system.
Achieve compact and low-cost solutions! Wiring continuity checks and ground fault detection are possible without inspection wires!
An applicator for applying paint and coating materials to a uniform film thickness.
A test cylinder adhered to the coating is pulled using hydraulic pressure, allowing for a mechanically stable measurement of the adhesion strength between the substrate and the coating.
Server rack portable load testing device! Ultra-compact and easy to carry!
Developed to meet the needs of "wanting to install in a small space" and "wanting to test a small amount of samples"!
Spectral matching degree is above Class B of JISC8904-9! One unit can perform two types of tests.
If you have any issues with Proceq products such as the Schmidt hammer, Echo chip series, or Profometer, please consult us!
Irradiation area □50mm Perfect for small cell experiments! Desktop solar simulator
This is a compact tabletop test press machine for laboratory use. It can be used for pressing plastic sheets for compression molding and for vulcanizing rubber sheets, among other applications.
60 million simultaneous TCP session capacity! Over 37,000 new security attacks updated every month!
Rapid cooling with forced air cooling by a cooling fan! Uses a heat-resistant probe with a temperature resistance of 300°C for 30 minutes.
Easily visualize airflow with good visibility.
You can accurately grasp the points behind the walls and floors.
Durable, washable, compact! Take it out of your pocket and measure in an instant!
High-performance distance measuring device suitable for outdoor use.
In the era of integration and consolidation, we aim to be a needs-creation company.
What are the three benefits of changing manual torque measurement to automatic measurement?
In addition to the conventional digital meter, a graphic meter is now available for selection!
Measuring various samples such as paper, liners, tissues, and printing paper.
It is a high-performance and highly utilized power supply that flexibly responds to a wide range of loads.
[Thanks to you, it's a great success! ASENT planned!] Compliant with SAE standard J2716! Adopted in the advanced development of 20 automotive equipment manufacturers.
We provide one-stop support for reliability testing related to R&D, from jig manufacturing to pre-test preparations and standard/special tests.
Multifunctional diagnostic tester compatible with the world standard ECU diagnostic standards ODX and OTX, based on various standard diagnostic protocols (such as UDS and OBD).
"Raw material dissolution, product polymerization, maturation promotion" with options for warehouse lighting, side doors, etc.! *Rental is also available.
Portable and high-frequency response with unparalleled operational efficiency, MTS Roehrig electromagnetic drive (EMA) damper testing device (patented).
A compact, lightweight, battery-powered portable communication analyzer that can also function as an analog logger.
More smart inspections - easier to use and more accurate - Portable Ultrasonic Flaw Detector USFD-20 weighing approximately 840g.
Press small bagged products at any pressure and time, and confirm that there is no seal peeling or bag breakage!
Original design! Equipped with an advanced displacement control system, the displacement accuracy reaches 0.1mm.
- EVERFINE, a company with a global market share! - Supports 15kV, 7.5kA
Kamome Kogyo Co., Ltd. is a specialized company that connects technology and people.
By using circulating gas cooling, expensive liquid helium is unnecessary, achieving ultra-low vibrations at 4K.
A cutter developed in pursuit of the ideal as a punching blade for specimen preparation, featuring a replaceable blade system.
Measurement device for temperature changes of silver test pieces and thermocouples by Almel for the analysis of cooling performance of quenching oil.
Yagi Manufacturing Company for the design, manufacturing, modification, and repair of environmental testing equipment.
We respond to various requests for material testing.
A multi-blade cutter that can cut the coating in one go. Cross-cut tests can be performed easily, quickly, and accurately.
By applying paint at a certain film thickness and standing the test piece vertically, we will test whether the flow (sagging) of the paint occurs due to the thickness of the film.
Solution for ready-mixed concrete quality control! A NETIS-registered unit water meter that can measure easily, quickly, and with high precision!
Compliant with ISO 9227:2022! Establishing traceability with international measurement standards.
Ideal for measuring low-gloss surfaces. Compact and lightweight. Can measure for long periods without calibration!
Ideal for various evaluation tests in research and development of solar cells and artificial photosynthesis!
Flexible irradiation is possible with fiber emission! Achieves a compact size with built-in power supply.
We will conduct temperature and humidity distribution measurements in the temperature and humidity test chamber, as well as comparative measurements of indoor environmental temperature and humidity!
This is a Gurley-type permeability tester used for measuring the permeability (air permeability) of materials such as paper.
Tabletop mixing and extrusion molding evaluation test device Laboplast Mill - small pelletizer for micro use.
It is an automotive wire abrasion testing machine (scrape tester) compliant with ISO 6722.
Grip device for tensile testing of threads and cords (air-tightening type)
Mooney viscometer with a rotorless mechanism.
This is a density hydrometer that uses a high-precision electronic balance with a resolution of 0.00001g. It automatically measures the density (specific gravity) just by setting the sample.
We recommend conducting laser damage tests to avoid unexpected laser damage.
Automobiles, paints, construction, plastics, printed materials, textiles, etc.! They are adopted as tests in various fields.
Send compressed air at the specified pressure and hold for a set time! Check for any leaks.
The definitive version of low inductance coil testing! The waveform of the 10μH coil is displayed clearly!
Testing device (tester) for current transformers and voltage transformers ★★★ Instruments for distribution boards, control panels, distribution panels, and panels.
The required amount is 10ml! Determine the ratio of the saturated fraction, aromatic fraction, resin fraction, and asphaltene fraction.
The resolution is the same as the wavelength of light, ranging from 0.4μm to 0.7μm! With the multi-lighting function, observation can fully utilize the lighting effects!
User-friendly and enhanced safety insulation breakdown testing device!
Equipped with axle slip measurement functionality! A wide range of options available from compact cars to large vehicles.
Rotate at the specified angular acceleration and speed! During the test, the temperature, vibration, and rotation speed of each part will be measured and recorded.
Line up various wavelengths to match the fiber optic line being measured!
The NFC function used for the digital key of the CCC (Car Connectivity Consortium) can be verified.
We will propose an appropriate configuration based on the motor shape, characteristics, and test items. It can also be used for performance evaluation tests of inverters.
You can use the testing equipment at your preferred location for the necessary duration when needed.
Friction, Wear, Lubrication: Solving Tribology Challenges! Compliance with Standard Tests / Reproduction of Operating Environments / Performance Quality Evaluation
The handheld air permeability tester FX3360 can automatically sample and measure the air permeability of the target sheet both online and offline.
Developed as a compact permeability testing machine based on size, weight, and price!
Compact and lightweight 2-axis tilt sensor with a measurement range of ±80° and a minimum detection angle of 0.1°.
Measurement of bending yield strength, evaluation of hardness and yield characteristics of plastics, metals, and similar rigid materials.