You can see whether the measured object operates within the product specifications or if it breaks.
High and low temperature circulating constant temperature bath
The direct circulation method maximally suppresses heat loss! Achieving testing with a stable temperature distribution.
Easily rent a large high-temperature and high-humidity room for anywhere from 1 hour to several months!
High-precision constant temperature bath with hot air circulation covering a range up to 400°C.
Equipped with an uninterruptible power supply, it continues exhaust operation for a certain period during a power outage.
The first domestic environmental testing equipment manufacturer! Achieving the complete elimination of high GWP refrigerant R-404A with a full lineup.
High and low temperature circulating constant temperature bath
The NST series is a stability testing device specifically designed for pharmaceuticals, developed based on a "risk-based and science-based approach."
This is an oven specialized for heat treatment tests in a non-oxidizing atmosphere.
The heater section has achieved cost reduction and standardization of the assembly process by standardizing it with other models through unitization.
A constant temperature tank where the body and the water tank are separated, making water replacement easy!
We offer three models ranging from small to large! A hygienic multi-warmer using air heating method.
A cuvette holder with temperature control function capable of rapid and accurate temperature control (+5 to +105°C) using a Peltier element.
Fully implementing the concept of the intelligent chamber!
On-site assembly is also possible! A prefabricated device that is easy to install and dismantle.
It is a high-precision constant temperature device that allows for heat resistance tests and heat treatment at higher temperatures to be easily conducted.
We have experience in achieving a vacuum level of 10 -10 torr. We have extensive experience in manufacturing vacuum chambers tailored to our customers' needs.
Timer operation is selectable! The temperature controller uses an easy-to-use digital temperature controller.
An oil bath that can be used according to various applications due to its rich lineup.
A basic model that inherits the ease of use and high environmental performance of HIFLEX NEO-E while pursuing high cost performance.
Easy operation feature for all models! High heating and cooling capacity to accommodate various applications!
The temperature range is room temperature +15°C to +80°C! Introducing a constant temperature water circulation device that can circulate high-temperature water in a closed-loop system.
Fully implementing the concept of the intelligent chamber! Implementing necessary functions and pursuing ease of use!
Remote monitoring and remote control are also possible! A constant temperature and humidity chamber suitable for laboratories and research rooms! All models are compatible with 100V!
Adopted a digital temperature overheat prevention device! Improved setting operations and temperature accuracy.
High-spec design changes are possible! The 7-inch touch panel controller also comes standard with a logger function.
(Association) Certified product by the Industrial Safety Technology Association! Explosion-proof constant temperature bath with refrigerating machine compliant with fluorocarbon regulations.
Yagi Manufacturing Company for the design, manufacturing, modification, and repair of environmental testing equipment.
Selectable timer with auto start and auto stop! Aquarium with a wide opening space and flat top.
The power supply is equipped with a leakage circuit breaker to prevent accidents caused by insulation deterioration or overcurrent!
The low-temperature testing of samples, storage, indirect cooling of low-temperature containers, and the use of stable cooling sources as a substitute for dry ice.
Neutralization test of concrete specimens! Unique structure with no airflow bias!
It is possible to achieve extreme drying in a high vacuum, allowing for the production of dried products with excellent reconstitution and solubility!
Utilizing the decrease in boiling point due to reduced pressure, drying is possible even at low temperatures! Ideal for drying materials that may deteriorate at high temperatures!
Efficient drying by controlling hot air! Ideal for drying materials containing flammable solvents!
This is a low-temperature dryer optimal for heat-sensitive materials such as food and pharmaceuticals.
Free comprehensive catalog that explains the environmental testing equipment unique to specialized manufacturers!
It is a fully automatic tensile testing machine for rubber, equipped with a dedicated constant temperature chamber.
This is a testing machine that evaluates low-temperature characteristics and cold resistance by seeking elastic recovery at low temperatures for materials that require sealing properties.
This is an impact testing machine with a low-temperature chamber that can conduct Charpy impact tests and Izod impact tests at low temperatures (-40°C).
There is also a large-capacity type aquarium with front and back windows.
A culture chamber with excellent uniformity of internal temperature.
Explosion-proof specifications designed for testing in a combustible atmosphere.
Decompression constant temperature and humidity chamber usable for high-level testing.
A hot air circulation precision constant temperature bath that demonstrates stable performance even during continuous operation.
We will improve the accuracy of research in a stable testing environment.
Achieve improved workability with a high N2 gas replacement rate, reduced N2 gas usage, and shortened temperature drop time.
Start of release in August 2023: Achieving harmony between price and needs.
Easy to operate thanks to the digital settings! A tank separation type that makes water replacement easy.
Efficiency improvement in constant temperature bath calibration! Optimization of temperature sensor placement.
A windless constant temperature chamber that does not blow air on the subject!! It features an observation window, cable pass-through hole, temperature cycle testing, and is PC controllable!!
High and low temperature circulating constant temperature bath
Environmentally friendly compact non-freon chiller
Introduction of a thermostatic oil bath suitable for heating control of small-volume solutions on a lab scale!
Temperature range is room temperature +10℃ to +150℃! Introduction of a circulation pump with an internal stirrer.
You can use it for purposes such as attaching fixtures for testing!
FUTABA adopts its own indirect heating method and takes safety measures into consideration.
An integrating sphere and a white standard plate coated with high-reflective white silicone that is resistant to water and temperature.
Due to the direct drive, there is no transmission error, and it supports a range from ultra-low speed to high speed.
[Transport Test] A series of packaging tests will be conducted in accordance with the test sequence specified in ISTA 7D.
Immersion-type constant temperature water circulation device
Constant temperature bath / Constant temperature and humidity chamber
Continuous testing in low temperature and low humidity control areas is possible through evaporation temperature control!
Equipped with a scroll compressor for all models! Expanded the effective area of the observation window and consolidated it into one panel.
It is standard yet allows for high-spec design modifications through custom orders.
Constant temperature bath using a liquid expansion thermostat! There are also types that do not use water or oil!
To customers looking for temperature control devices! Here are examples of constant temperature baths that maintain a stable temperature in shapes suitable for your space.
Introducing a constant temperature chamber equipped with a high-precision PID control system! It minimizes contamination and prevents sample drying.
Introducing a dry heat incubator with a maximum temperature specification of 260℃, capable of program operation and repeated operation!
We offer a standard lineup of sizes for the test chamber ranging from 230 to 1800 liters.
Environment and action-linked! A system that can conduct various durability tests under constant temperature and humidity conditions. Durability tests for flexible displays and more are possible.
Adopts a dual refrigeration method! Equipped with a highly visible observation window, achieving a temperature stability of ±0.03℃.
Achieving a temperature stability of ±0.1℃! It is widely used for cooling and temperature maintenance of beverage containers.
Power consumption can be reduced! The observation window is large, making it convenient for observing samples inside the low-temperature constant temperature water tank.
It quietly performs powerful stirring with a unique jet stirring method, providing a stable temperature environment.
Two types of lineup with depths of 150mm and 200mm! Stable temperature control and good tank stirring!
Response to external circulation! The compact design minimizes the installation space!
Equipped with a circulation liquid delivery function! The IN-OUT of the circulation is movable, allowing the direction of IN-OUT to be changed according to the installation environment.
You can choose the driving method, so a program-controlled tabletop low-temperature constant temperature water bath with fixed value operation is of course possible.
Wide cooling range and easy program setting! You can choose between constant temperature operation and program operation.
We have newly started a commissioned testing service for "Temperature and Humidity Testing." Testing-related materials are currently being distributed.
Achieving a fixture that is difficult to oscillate! Full automation is possible from test condition setup, power-on testing, to data acquisition.
Our company is equipped with facilities for machining, sheet metal processing, welding, and cutting!
Introducing an example of a hydrochloric acid tank that requires high welding strength and airtightness.
I hope the test conditions cannot be implemented with the conventional testing equipment! It is not possible to conduct failure reproduction experiments that take multiple conditions into account. Have you ever had such an experience?
Construction period: 45 days, working days: 3! We will introduce the renovation work due to the aging of the secondary storage tank.
Ideal for evaluating temperature characteristics and validating thermal analysis of semiconductors and printed circuit boards!
Directly operate in the tank while observing the sample! It is not affected by external air.
We will strive to be of service to society, starting with the industrial sector.
Neutralization test of concrete specimens! Unique structure with no airflow bias!
Custom-made in any size and shape you desire!