Leakage of the package and seal strength testing can be measured with a single device!
Data can be transferred to the PC via USB! The peeling angle is constant, so the measurement data is reproducible.
Measurement data can be output in analog! A high-speed peeling strength tester that allows for more detailed analysis.
Easily measure the adhesive strength of materials! Digital display adhesive peeling tester.
A pressure-seal strength testing machine widely used in the pharmaceutical, cosmetics, and food industries. It is a device that tests the seal strength of pouch and tube products.
This is a portable adhesive testing machine that measures the adhesive properties (tack value) of non-sulfurized rubber, adhesive tapes, and the like. It allows for easy measurement of the adhesive strength of materials on-site.
Bright display with LED adoption! No power supply needed, making it suitable for repair inspections and tensile load confirmations.
● Adopts electric cylinder, capable of repeated pressing tests, easy setting of pressing strength (operating force), test duration, number of tests, etc. from dedicated software.
Touch panel pressing durability tests and touch tests are possible! Contributing to the creation of higher quality products.
The shear strength is determined from the maximum load when punching with a punch that has a slight clearance against the inner diameter.
By applying paint at a certain film thickness and standing the test piece vertically, we will test whether the flow (sagging) of the paint occurs due to the thickness of the film.
Precise stroke control is possible with a servo motor system! Consideration has also been given to the ease of setting up test specimens!
This is a testing machine that reproduces the state in which thin paper, fibers, and films bend under their own weight to calculate the Clark's breakage (stiffness).
It is a system that attaches a load cell to the hammer impact blade (Charpy impact test) and the specimen support platform (tensile impact test) to measure the shock waveform.
While maintaining exceptional "visibility," we pursued "strength" and "durability."
Wide frequency range 1Hz to 400KHz isotropic electric and magnetic field measurement probe. 2-in-1 probe WP400 capable of spectrum analysis.
Entry model for automatic measurement! Complete measures against DI, control possible with dedicated software MC.NET.
This is a bonding strength testing machine that can meet all needs, including strength tests for various electronic components, strength tests for solder joints, and strength tests for wire bonding.
CE, RoHS certified device! Bond tester equipped with proprietary technology (patented).
It is possible to measure the hardness and Young's modulus of thin films or sample surfaces ranging from several hundred nanometers to several micrometers with high precision.
This is a testing machine that automatically conducts tensile tests on soft materials such as elastomers.
A deformation process focusing on the sample shape during bending! Evaluation of the sample is possible even during durability testing.
The bending angle and bending speed can be set arbitrarily! Bending tests can be conducted with a stable bending radius.
We can realize twisting durability tests for linear samples such as cables and fibers!
We will introduce the features of the MSE test and other testing methods.
Texture property measuring device low-cost compact type
Vertical stress on the shear surface can be measured accurately! Thoroughly compact as a tabletop model!
Vertical stress on the shear surface can be measured accurately! Thoroughly compact as a tabletop model!
The cupping test machine is a testing device used to evaluate the resistance to cracking and delamination from the metal substrate when the coating film undergoes localized deformation due to indentation.
The coating drying time measurement device is used to measure the time it takes for the paint to change from a wet film to a dry film.
It is a universal material testing machine with a maximum load capacity of 20 kN.
It is a testing machine that conducts tensile tests on plastic films automatically.
It is a testing machine that applies bending actions to materials such as paper, plastic film, metal foil, and flexible printed circuit boards (FPC) to evaluate their foldability.
This is a testing machine that applies repeated stress to plastic materials to evaluate their fatigue characteristics.
This is a device for pressing adhesive tape against a test plate during the adhesive strength test of adhesive tape, based on JIS Z 0237.
Related standards: ISO 812, ISO 974, ASTM D746
The Charpy impact testing machine with a low-temperature chamber has automated specimen transport.
This is a tabletop universal material testing machine with a maximum load capacity of 5 kN.
It is an automotive wire abrasion testing machine (scrape tester) compliant with ISO 6722.
This is a tabletop universal testing machine with a maximum load capacity of 1 kN. The E3-L can accommodate specimens with large elongation.
This is a strain gauge-type wire elongation meter compatible with the measurement of the tensile elastic modulus of plastics.
This is a testing machine that measures the static friction coefficient (μS) and dynamic friction coefficient (μK) of materials such as plastic films, paper, textiles, and leather products using the horizontal method.
A high-torque extruder with even stronger kneading capability than a parallel type twin-screw extruder!
Fixture for 90-degree peel strength testing of adhesive tapes.
A tensile testing chuck (gripping device) with a maximum capacity of 500N to 3kN, suitable for tensile tests of rubber and other dumbbell-shaped specimens.
A tensile testing chuck (gripping device) with a maximum capacity of 1kN to 20kN, suitable for tensile tests of materials such as plastic.
Anyone can easily measure various materials in hardness units.
It is a tabletop tensile testing system of the tension type with a constant speed extension!
Compact lightweight DC response accelerometer with durable low-noise cable, high performance.
DC response oil-dump type small and lightweight accelerometer, shock resistance up to 20,000g, wide measurement range from ±5g to ±10,000g.
Free comprehensive catalog giveaway! Choose from a range of ±2g to ±200g with high sensitivity.
We will investigate the workability of the material in bending through a three-point bending test.
We will sincerely respond to the realization of all fatigue tests, from various materials such as resin and rubber to parts for automobiles and aerospace.
Electric scratch testing! We also have a type that can test with two pencils at once!
Easily set the speed, position, and pressure of the push!
Durability testing of various container hinge caps, including food and cosmetics, is possible!
This is a plug that allows for isolation and pressure testing after welding to be conducted locally during the replacement work of the weld neck flange. [Maximum pressure value: 15.5 MPa]
This is a plug that allows for localized pressure testing after welding in flange construction. [Maximum pressure value: 15.5 MPa]
A property measurement device that compactly integrates a variety of functions!
Equipped with a wide sample stage that can accommodate a sample about the size of a slice of bread!
A solution that integrates control and data collection to efficiently conduct tests on all types of structures.
There is no damage to the measured wire because the current is not continuously flowing!
Consolidate 4 parameters into one report! Manual measurement of thickness, major diameter, and hardness with a single device.
This is a multifunctional bond tester developed by XYZTEC, a manufacturer specializing in bond testers.
A testing device for managing building equipment sites that eliminates difficult operations and pursues ease of use and simple functionality.
Contributing to the improvement of the global environment! After demolding, it can be separated into metal and paper for collection, disposal, and incineration.
In a world of 240,000 rpm, we bring design theory into reality.
Recommended for ultrasonic welding defect inspection of electrodes and battery tabs! Achieve 100% inspection on the production line.
We offer a wide variety of testing machines for molds to enable extensive testing.
Are you not performing "machining" for the production of tensile strength test specimens? A shell mold for cast iron tensile tests that can significantly reduce the process and cost of machining round bars for quality testing.
For testing the peeling strength of mortar, tiles, etc., and the pull-out strength of pins, easily measure the adhesive strength of samples between two layers.
We are conducting molding and processing tests of various polymer materials.
Tensile testing is the most fundamental test for evaluating the mechanical properties of materials.
The purpose of this test is to evaluate the interlayer adhesion performance.
It is a shear test in the direction perpendicular to the laminated surface of GFRP using a Johnson-type two-surface jig.
Achieve natural bending tests! It is possible to conduct load-free bending tests without applying tension and friction to the sample.
Removable cartridge! It can accommodate simultaneous testing and various sample sizes.
Ideal for repeated winding durability tests of rollable devices and materials!
The clamp section adopts an independent four-point fixation! Achieving a torsion test that does not impose a load on the planar body sample!
The bending angle can be set arbitrarily! A tabletop durability testing machine capable of bending tests up to a maximum of ±180°.
Twisting tests for samples up to φ10mm are possible! Twisting tests can also be conducted for 10 turns in both directions.
A wide range of environment and action-linked durability testing systems available! Programmed operation is also possible!
Equipped with curved shape analysis functionality! A durability testing machine that can also predict the timing of failure from shape changes.
Various bending tests compliant with JIS standards are possible! Introducing the DMLHB-P150 / DMLHP-P150 suitable for bending tests.
The lower clamp of the sample slides up and down in conjunction with the bending motion of the sample!
Introducing the "TC111L-P300," capable of various bending tests in accordance with JIS standards!
The bending R frame can move up and down! A weight of up to 100N can be used per unit.
Bending tests can be conducted with a stable bending radius! It is possible to achieve bending tests without tensile load.
We offer tabletop durability testing machines and standalone durability testing machines! You can choose a testing machine suitable for your work size.
The clamp section uses an independent four-point fixation! Twisting tests can be conducted without applying load (tension) to the sample.
Hybrid III 50th Adult Male Dummy
From thumb inspection to data verification! Accurate and fast welding strength evaluation equipment.
Introduction to Seiei Computer's electronic equipment business: "Assembly machines, transport machines, and manual jigs."
Tests were conducted on two types of carbide tips for cast iron machining.