A simple vibration meter using wireless technology! The measurement start function 'Trigger Measurement Mode' allows for synchronized measurement with external equipment!
Quantifying the inspector's "ear"! It reliably captures only the targeted abnormal vibrations of the product without being affected by surrounding noise, preventing the outflow of defective products and reducing reliance on individual inspectors.
Four models in the lineup! Achieving more accurate measurements by reducing the impact of sensor weight.
Escape from uncertain lifespan management where you don't know when to replace! Quantify the amplitude of the horn tip non-contactly to achieve the prevention of welding defects.
For constant vibration monitoring of motors, pumps, fans, etc., and equipment diagnostics! It features a digital meter display that is easy to understand at a glance. It supports all modes of acceleration, velocity, and displacement.
Simple operation allows anyone to easily measure vibrations. Low price, ultra-compact, practical, and speedy!
Proposing appropriate measurement designs to customers and helping make the workplace more comfortable.
Distinguish abnormal sounds with the V3 band and auditory function! Evaluation based on ISO and JIS standards is possible.
Industrial IoT Equipment Monitoring Small Wireless Sensor "Sushi Sensor" Trial Rental Pack Plan from ¥169,500/month for 1 month.
Equipped with output in three directions. Waveform recording is possible with a frequency analyzer and data recorder.
By simply retrofitting existing machine tools, vibrations and processing loads can be quantified and graphed.
A new option for large-scale, low-frequency areas where hydraulic systems have been used.
Early detection of equipment abnormalities and efficiency improvement of maintenance operations.
Listening, measuring, and judging instead of using a stethoscope. Early detection of equipment overheating.
Connectable to major PLC manufacturers' units! Achieving visualization of vibrations and IoT sensing.
Realization of waterproof type in built-in amplifier 3-axis accelerometer sensor.
Analyzing the collected data! A vibration/noise measurement/analysis system that can also record distortion, temperature, images, and more.
A seismic observation system has been established to monitor aftershocks using seismometers installed underground and on the surface, and to investigate ground amplification characteristics.
Japan Kanomax Co., Ltd. (Chairman: Minoru Kano) will launch a small vibration meter and a general noise meter in Japan starting from November 2012.
Since it is wireless, there is no need for troublesome wiring, making installation easy! It allows for extensive measurements and can simultaneously measure multiple sensors.
An online vibration meter that accurately detects equipment abnormalities. It uses a digital meter, improving visibility as well.
Easy-to-read color LCD screen! Measurement device compliant with ISO elevator diagnostic standards.
Non-destructive sensing of internal degradation. Rapid detection of abnormalities in structures and machinery.
Essential for quality assurance in the logistics era. Measure and record acceleration in the X, Y, and Z directions, as well as temperature and humidity, at hourly intervals.
[New Series Added] For those who want to know about vibrations, we have summarized the basics of vibrations! Learn the fundamentals of vibrations in this series that you can't ask about anymore!
A vibration sample magnetometer that is easy to use even for beginners.
Visualizing invisible dangers with IoT sensors! You can avoid significant risks by predicting abnormalities and failures in on-site equipment.
Due to its small size and lightweight, it can be easily attached to the measurement target and is easy to handle!
Wide dynamic range, capable of measuring from minute accelerations! Built-in preamplifier.
Visualizing the vibrations of the printing machine to improve quality and productivity.
Quantifying vibrations to reduce foreign matter contamination risks. Supporting quality control in food factories.
Listening, measuring, and judging instead of using a stethoscope. Quantifying abnormal sound sources to streamline inspections.
Early detection of abnormalities in infrastructure equipment. Contributes to inspection efficiency and the longevity of equipment.
Listening, measuring, and judging instead of using a stethoscope. Quantifying abnormal sound sources to streamline inspections.
Listening, measuring, and judging instead of using a stethoscope. Early detection of equipment overheating.
Easy operation! Excellent momentary interruption detection capability!
Directly capture the sound of the ball with an accelerometer! Accurate measurements can be made without being affected by surrounding noise.
The visibility distance is approximately 75 meters. It is compact and lightweight, powered by batteries or an external power source.
Efficiently collect and analyze the data necessary for vibration trend management of rotating machinery!
No wiring required for easy installation! Early detection of equipment anomalies reduces maintenance costs.
Visualize vibrations and improve the safety of chemical plants. Easy installation without wiring.
Support quality control of aerospace components with vibration sensors.
Optimize production maintenance with fault prediction! Vibration data collection and analysis are also possible.
Measure equipment vibrations and detect abnormalities early!
Streamlining the management of aircraft vibration trends!
Efficiently collect and analyze the data necessary for vibration trend management of rotating machinery!
Optimize the operation of mining equipment with vibration sensors. No wiring required, easy to retrofit.
If you are concerned about the personalization of vibration diagnostics, please consider Asahi Kasei Engineering's vibration diagnostics.
Portable vibration meter for standardizing equipment maintenance in the manufacturing industry.
Eliminate the personalization of generator monitoring and create a vibration meter that anyone can use to make the same judgment.
With one unit, you can measure engine vibrations and airframe vibrations! All measurement data can be collected with just the main unit.
With a communication distance of 100m, centralized management of on-site equipment from the factory office is possible! Recommended for preventive maintenance and monitoring of factory equipment!
"Simply place it on rotating machinery" Easy predictive maintenance! LoRaWAN-compatible smart vibration sensor
A vibration meter available for 98,000 yen! Despite its low price, it can simultaneously measure acceleration, velocity, and displacement.
Simplifying systems and operations! A case where the monitoring method for the bearing section was optimized.
Identification of abnormal vibrations and their causes! Introduction to a hands-on training device for learning maintenance.
We will analyze the ultrasonic frequency specific to corona discharge and determine if it is caused by the discharge!
Our products, which meet high quality standards and respond to new needs, have received great acclaim from customers around the world.
Incorporated into the product to detect the presence or absence of impact! Ideal for monitoring the user's product handling situation.
Measuring temperature, humidity, and shock in the transport environment! A high-quality data logger with a refined shape that is easy to attach to packages and maximizes usability.
Three mode support for acceleration, velocity, and displacement. Connection to servo acceleration LS-10C is possible.
A wide range of products is lined up to be used according to the purpose of measurement.
Constant monitoring of "machine vibrations" at power plants, nuclear power plants, plants, and production facilities.
Evaluation of the residential performance of buildings.
For measuring "noise and vibration" at construction sites.
It is a vibration measurement device that complies with the ISO elevator diagnostic standards.
It is a vibration switch that quickly detects abnormal vibrations and activates an alarm.
It is possible to equip one device with octave analysis, FFT analysis, and waveform recording functions. Wireless measurement eliminates the need for long cable runs on-site.
Corresponding to the modes of acceleration, velocity, and displacement. Up to 1000 data points can be stored.
![3116_3116A[1].png](https://image.mono.ipros.com/public/product/image/69d/2000218201/IPROS2318954705948102609.png?w=280&h=280)
See, hear, measure - the renowned doctor of industrial machinery! A compact vibration meter smaller than a mobile phone.
High-precision measurements made easy with the palm of your hand! With high operability, even beginners can measure easily.
Measuring minute vibrations in the X, Y, and Z directions using a three-directional servo-type sensor.
A comprehensive vibration monitoring system capable of measuring, controlling, and monitoring vibrations. Ideal for continuous vibration monitoring of fans, pumps, turbines, and other rotating machinery.
Introduction of main products of Showa Instruments, such as vibration meters and recorders!
Built-in preamp acoustic emission (AE) sensor
A handheld type compatible with equipment diagnostics and on-site measurements, a high-functionality vibration analyzer capable of general vibration measurement and FFT analysis.
A quiet and comfortable environment inside and around the factory! A system that can be retrofitted to existing equipment.
It is possible to analyze and compare vibration shapes! You can evaluate changes in components.
To prevent heat stroke among workers! Clearly display the current environment in "numbers" on an electronic bulletin board.
The first unmanned monitoring system in Japan that identifies only the noise, vibration, and low-frequency sound that you want to measure.
Please leave the noise and vibration measurement to GS Yuasa Environmental Science Research Institute.
Vibration diagnostic technicians diagnose the condition of machines! Why not start predictive maintenance before the machines break down?
Achieving high-precision vibration monitoring at production equipment maintenance sites at low cost.
A non-contact laser Doppler vibrometer that pursues ease of use by confirming the laser irradiation position with an internal camera.
Streamline equipment maintenance. Early detection of anomalies with this one device.
Quantifying abnormalities in air conditioning equipment to achieve efficient inspections.
Listening, measuring, and judging instead of using a stethoscope. Early detection of equipment overheating.
Detecting abnormalities in railway equipment through numerical values. A portable vibration meter that streamlines inspection operations.
Support aircraft abnormal noise diagnosis with auditory and numerical data. Improve inspection efficiency.
Quantifying vibrations to detect signs of leakage early. We ensure the safety of equipment.