With the experience and know-how cultivated in European development sites, we respond to various needs from CAE to prototyping and evaluation! 【*Free case study collection available】
Attention quality managers! Leave the troublesome raw material testing to us. We are a GMP-compliant testing organization in the Pharmaceutical Policy Division of Toyama Prefecture!
An arc discharge is generated at a specified interval between two tungsten electrodes on the surface of the test specimen, and the time until the sample breaks and the arc discharge disappears is also measured.
Organic acid analysis will be conducted using HPLC and LC-MS/MS.
Vertical Combustion Test for Thin Materials (ASTM D4804)
If you are looking for a subcontractor for 3D measurement, 3D scanning, inspection and measurement, or if you are seeking parts procurement with quality assurance, leave it to us.
We will conduct evaluations of adhesion and scratch susceptibility using three types of scratch testing machines with different measurement ranges.
Three-dimensional observation of fibers on the nanometer order inside the sample is possible.
Wide-ranging evaluation of recycled plastic, from foreign substance assessment, crushing, molding, to physical property measurement and composition analysis!
Small holes are gradually drilled into the surface being measured, and the strain released during this process is measured to calculate the residual stress.
To reduce unexpected vibrations and noise during trial operation, as well as the vibration and noise of equipment and devices!
We will be exhibiting at the eX-Tech 2026 microelectronics show within the JPCA Show 2026.
Are you having any trouble with measuring parts? We will measure the X, Y, and Z coordinates with high precision.
Contracted services for genetic analysis, morphological observation, physiological and biochemical trait testing, and chemical testing / Selecting and conducting effective tests for taxonomic characterization based on the results of genetic analysis.
Please leave the contracted vibration testing for the "large displacement / temperature and humidity composite environment" to Nagao Industry's Tokai Testing Center.
![0_rogo[1].jpg](https://image.mono.ipros.com/public/company/image/914/2003867/IPROS66781584137171941583.jpeg?w=280&h=280)
Environmental measurements at "Workplace 1" and "Workplace 2"! Introduction of fees for adding measurement substances, etc.
The introduction of the Keyence LM-1100 image dimension measuring device allows for even more precise measurements with a minimum half-day estimate!
If you are looking for a subcontractor for 3D measurement, 3D scanning, or inspection, or if you are seeking procurement of processed parts with quality assurance, leave it to us!
If you are looking for a subcontractor for 3D measurement, 3D scanning, and inspection, or if you are seeking parts procurement with quality assurance, leave it to us.
Cooling and hardening the soft sample to make it machinable.
DSC can evaluate the physical properties of a sample based on the heat changes that occur during heating.
A method for removing the surface of a sample by utilizing the sputtering phenomenon, where sample atoms are ejected from the sample surface.
It is possible to evaluate the causes of contamination in vacuum devices, such as oil backs and grease!
It is possible to measure the barrier properties of water vapor, oxygen, hydrogen, and others at high speed, high sensitivity, and high precision. There are many requests for contract analysis based on our extensive measurement track record!
We will conduct non-contact dimension and shape evaluation, as well as three-dimensional data conversion, with high precision.
Utilization methods for taste sensors in product development and marketing.
Using the SEM-ECCI method, observation becomes possible with easy preprocessing! We will also introduce measurement examples of single crystal GaN.
It is possible to measure the thermal behavior of calcium oxalate monohydrate during dehydration and other processes.
You can use it for investigating the applicability of odor, taste, and appearance analysis equipment, or for one-time data collection purposes.
Quickly digitize the site! Streamline piping design with 3D scanning.
GDMS is a method suitable for evaluating trace impurities (ppm-ppb wt) and can simultaneously measure almost all elements except for gas components with stable isotopes.
Measure oil mist, moisture, carbon monoxide, etc., and maintain cleanliness!
Measurement time is about 1/10 of a tripod-type 3D scanner. Easy, quick, and convenient! Just walk around with a lightweight laser scanner on your back for automatic measurement! *Video available.
Apply a voltage between the platinum electrodes and drip the electrolyte until tracking failure occurs. Evaluate at a voltage that does not cause failure with the specified number of drips.
Confirm that it does not belong to B. anthracis / Estimate whether it is a species that falls under BSL2 within the B. cereus group / Diarrheal toxin and emetic toxin tests.
We will provide various validation services that meet different standards.
The standard conditions are 5% saline solution at 35°C! Introducing the "basic fee" and "processing costs" for the "saline spray test."
Shortest half-day estimate / We will solve your concerns such as "difficult to measure, unable to allocate man-hours," "no inspection equipment for parts," and "manufacturing parts without drawings"!
By replacing the sample holder, measurements can be taken from φ2.88mm chips to φ6 inch ingots!
Comparison tests of repellent and insecticidal effects against "mosquitoes." Increased reliability with certification from a third-party organization!
Measurement of various components of the powertrain in a real vehicle.
Effective for evaluating the types, quantities, and chemical bonding states of elements on the sample surface (at a depth of about several nanometers).
This is a processing method for cutting bulk samples using a diamond knife to produce ultra-thin sections for transmission electron microscopy with a thickness of less than 100 nm.
Check the leak path by 3D visualization of SEM images.
Non-destructive measurement of the distance between electrodes inside batteries and defect investigation is possible.
To a more user-friendly and easier-to-read homepage.
Evaluation of dust generation from mechanical parts and various materials. Real-time counting of the total amount of generated fine particles and particle size classification. Includes an evaluation report.
It is recommended in the "Guidelines for the Basic Design of Small-Scale Buildings" edited by the Architectural Institute of Japan.
Leave the management of complex measuring instruments to the measuring instrument management system "MiX."
Introducing testing equipment that can control air pressure, temperature, and humidity in the engine test bench room.
Comparing the differences in softness between two types of bread! It was found to consist of three components with different mobility.
Measuring the amount of contaminants and wear metals in oil! The target oil types are industrial gear oil, engine oil, and automotive gear oil.
Measuring the amount of contaminants and wear metals in oil! The target oil types are industrial gear oil, engine oil, and automotive gear oil.
We will re-pelletize your plastic materials and return them to you. Additionally, we will manufacture and sell recycled materials tailored to your needs using our own technology.
We provide recycled plastic materials to enhance the safety of toys.
"Is this building safe with just a visual inspection?" Supporting building safety management and BCP measures.
We will investigate the durability of materials and products by applying heat shock (thermal shock) to them.
We will accommodate tests such as temperature and humidity cycle tests, high-temperature storage tests, and low-temperature storage tests.
We will conduct measurements of electrical conductivity using a conductivity meter.
[Case Study] We compared the taste of croquettes!
We offer contract measurements of ultra-fine bubbles! Using NANOSIGHT, we provide particle size and number distribution data!
Nano to angstrom resolution! Observation of fine morphology and composition analysis at the atomic level.
Protects beverages from contaminants that compromise flavor.
Knowing the state of lithium is the first step towards solving current challenges and further improvements!
We measure radioactive substances in food, tap water, waste, fertilizers, etc.
Quickly diagnose the accuracy of your machine tools at low cost.
The electrical properties and film quality of the SiO2 film on the Si substrate were investigated in detail for each deposition method.
No drawings! Unable to understand the current state due to modifications! A 3D laser scanner to solve the design of factories, ruins, and ballast water treatment systems [Catalog available].
Quantitative analysis based on optical properties comprehensively supports the quantitative analysis of fulvic acid and humic acid!
20mm vertical burning test (IEC 60695-11-10 Method B, ASTM D3801)
Horizontal combustion test (IEC 60695-11-10 Method A, ASTM D635)
It is possible to measure without any issues even in environments where coolant, dust, and welding dust are present.
For atmospheric and air measurements, please leave it to GS Yuasa Environmental Science Research Institute.
For PCB investigation and trace PCB analysis, please leave it to GS Yuasa Environmental Science Research Institute.
High-sensitivity and high-precision measurement of metabolic fluctuations in central metabolism that can only be detected with CE-QqQMS!
Measure the soil penetration resistance, as well as the hardness or compactness, or the composition of the soil layers.
The forced opening and closing mechanism allows for quick attachment and detachment of test specimens, making it ideal for conducting numerous tests with the same shape!
High resolution and high-speed image processing are its features!
Investigation of chemical substances in sick houses, sick schools, and sick buildings.
By simply sending a stool sample, you can analyze organic acids (short-chain fatty acids) and the gut microbiome. A stool collection kit that can be stored at room temperature is also available for purchase!
"Potassium," "phosphorus," and "arsenic (As)" are included! We will introduce the prices excluding and including tax.
Shortest half-day estimate / Supporting the reduction of customer inspection burden!
If you are looking for a subcontractor for image dimension measurement and inspection, or if you are seeking procurement of processed parts with quality assurance, leave it to us!
If you are looking for a subcontractor for measuring and inspecting roundness and cylindricity, or if you are seeking procurement of processed parts with quality assurance, leave it to us!
We accept measurements of liquid viscosity. A small sample volume is sufficient, with only 2ml required.
It is an analytical method that detects ions with a detector and performs qualitative and quantitative analysis.
Measurement of weight change, differential thermal analysis, heat quantity, and mass of volatile components resulting from heating the sample.
XAFS is a method for analyzing the absorption spectrum obtained by irradiating a substance with X-rays.
OBIRCH is a method that utilizes the change in resistance caused by the heat generated at defect locations when light is applied, to identify abnormal areas.