Attention quality managers! Leave the troublesome raw material testing to us. We are a GMP-compliant testing organization in the Pharmaceutical Policy Division of Toyama Prefecture!
An overwhelming inspection speed of 250 units per day and a wealth of inspection results! Suitable management of reformer tube lifespan and equipment management costs with a non-destructive testing system for all units.
Seal strength testing as specified in ASTM F88 can be performed.
Conducting sampling tests for foam extinguishing agents! We will send a sampling kit from our company and carry out the tests.
By immersing the test object in water and focusing the ultrasonic beam, precise inspection of the surface, back, and internal defects of the structure can be performed.
We will be exhibiting at the "2025 Yokohama International Automobile Technology Exhibition!!"
Identification of types of iron bacteria (Gallionella, Leptothrix, Sphaerotilus, etc.) / Report of microscope images capturing cell morphology.
Attention quality managers! Leave the troublesome raw material testing to us. We are a GMP-compliant testing organization in the Pharmaceutical Policy Division of Toyama Prefecture!
Even narrow widths or small diameter scratches that are usually invisible to the eye can be confirmed visually!
Incorporating various information for analysis! Conducting appropriate investigations in accordance with the guidelines of the Ministry of Land, Infrastructure, Transport and Tourism.
We will respond flexibly according to your consultation!
We will measure the evaporative gases that permeate from gasoline fuel system components such as automobiles using equipment that measures in a sealed space, in accordance with regulatory requirements.
We will inspect the products procured by the customer from both domestic and overseas sources on behalf of the customer.
"Drone infrared survey" The investigation of office buildings raised concerns about pedestrian traffic, but the survey was completed in a short time during the weekend when foot traffic was low.
The dye penetration test specified in ASTM F1929 can be conducted.
Free basic analysis seminar held! Please make use of it to enhance your company's analysis skills.
Presentation of materials on the characteristics of PFAS and regulations in various countries!
We offer ultrasonic testing of carbon fiber reinforced plastic (CFRP) laminated plates, including checking for internal voids in base plates and prototype development products.
By using drones, it becomes easy to conduct module inspections of large-scale power plants and rooftop power plants!
We will conduct the annual inspection of the depalletizer, which is difficult to approach during operation and challenging to identify the causes of failure!
We will conduct weather resistance tests and measurements of color difference, glossiness, and haze after the tests.
We will sincerely respond to the realization of all fatigue tests, from various materials such as resin and rubber to parts for automobiles and aerospace.
We support our customers in solving problems through metal rust analysis and the deterioration analysis of resins and rubber.
We will conduct measurements of gases emitted from the product using GC-MS, GC-TCD, and GC-BID.
Measurements of elements, ions, and compounds that elute under specific conditions will be conducted.
By using a vacuum truck, it is possible to avoid solution leaks, shorten work time, and reduce residual solution!
Conduct special pharmacological efficacy evaluation tests related to the central nervous system and ophthalmology.
By consolidating or planning the annual allergen testing at the main department, we aim to reduce testing costs and shorten delivery times.
As a steel grade identification test, it is possible to distinguish between six types of steel, including S45C and S15C!
I specialize in the processing of the outer metal sleeve of the magnetic roller in copiers, utilizing the polishing techniques and precision cutting skills I have developed.
We conduct inspections using a microscope, such as cross-sectional observation and checking for peeling.
Identify the name of the microorganism in 4 business days! If only the BLAST results are needed, it takes 2 business days for bacteria and yeast / We accept comprehensive contracts for DNA extraction, PCR, sequencing, and identification work.
We also accept analyses in various fields! Food analysis by Hyogo Analysis Center Co., Ltd.
Environmental Impact Assessment based on the Environmental Impact Assessment Act! Environmental assessment by Hyogo Analysis Center Co., Ltd.
Peace of mind and safety! Water quality analysis by Hyogo Analysis Center Co., Ltd.
Acquired international standard ISO 17025. Capable of radiation testing recognized worldwide.
Comparison tests of repellent and insecticidal effects against "mosquitoes." Increased reliability with certification from a third-party organization!
This is a method for qualitative and quantitative analysis of components contained in a sample by detecting secondary ions and measuring the detection amount at each mass.
Supporting long lifespan! The fusion of deterioration diagnosis technology with proven traditional deterioration surveys and functional diagnostics is also effective!
We accept corrosion resistance testing of electronic components against corrosive gases in accordance with JIS C 60068-2-43 and JIS C 60068-2-60!
Magnetic powder adheres to the defect, causing the defect to expand! Introducing an inspection method suitable for ferromagnetic materials.
Low cost, high precision, accurate non-destructive testing from 150,000 yen per specimen.
We can flexibly accommodate shapes and sizes that cannot be achieved with automatic polishing.
Leave processing and light work to us, done by hand.
Penetrant testing certification obtained by 2 employees! We can also handle the manufacturing of regulatory items such as fire inspection and pressure vessels.
We provide a location where large-scale reproduction tests, accident investigations, battery tests, and other tests requested by customers can be conducted!
The legal revision in April 2022 clearly states! Drone infrared exterior wall inspections are an investigation method recognized by the government.
"Drone Infrared Survey" Regular inspections of commercial facilities. An introduction to a case where the inspection was completed in one day, minimizing the impact on business operations.
The NFC function used for the digital key of the CCC (Car Connectivity Consortium) can be verified.
We will evaluate the creep properties of materials and products under both room temperature and temperature-controlled environments.
We will conduct tests for corrosion resistance evaluation that are close to outdoor exposure for metals and surface treatments.
Residual solvent measurement in the product will be conducted using GC-MS.
We will conduct cross-sectional sample preparation and analysis using equipment suited to the purpose.
We provide contracted testing services for products with a well-balanced range of testing equipment.
DAKKS (Germany) accredited testing laboratory! Numerous achievements in CT scanners, ultrasound, MRI, X-ray diagnostic equipment, intravenous drips, electrocardiograms, and nursing support robots, etc.!
Easily install a power conditioner (power con)! Since it's a container, it is movable for relocation and removal! [Power Con] storage container.
Leave it to us for analyzing internal defects and creating 3D data!
We will conduct prompt and appropriate investigations and reports on mold, glass fragments, metal scrubbing pads, and more.
We will reduce power consumption by improving operating efficiency through the cleaning of the freezer condenser!
We present a case where fluoride was detected in the results of cold and warm water quality testing, and it was found that there was a refrigerant gas leak following equipment inspection.
We will examine the changes in the number of bacteria when food is stored under certain conditions.
Attention quality managers! Leave the troublesome testing to us. We are a GMP compliance testing inspection agency in the Toyama Prefecture Pharmaceutical Policy Division!
Attention quality managers! Leave the troublesome testing to us. We are a GMP compliance testing inspection agency in the Pharmaceutical Policy Division of Toyama Prefecture!
*Quickly resolve issues related to blood stains (blood) on boxes and packaging materials! * We provide high-precision testing using forensic science and DNA, as well as easy-to-use testing kits.
Confirm and certify the variety of grain seeds and processed products through DNA testing. ★ For quality control, label verification, and risk management, as well as brand protection ★
Contract services for protein expression and purification, as well as diverse analyses of proteins and enzymes!
We will meet your quality needs with various equipment and measuring instruments!
We will safely and effectively clean your pipes within just 4 hours of water outage due to pipe scale or factory pipe blockages. Please contact us for solutions other than water.
Quantitative analysis based on optical properties comprehensively supports the quantitative analysis of fulvic acid and humic acid!
Corner weld inspection (defect detection)! Defects inside the weld can be detected!
For atmospheric and air measurements, please leave it to GS Yuasa Environmental Science Research Institute.
For PCB investigation and trace PCB analysis, please leave it to GS Yuasa Environmental Science Research Institute.
We will conduct tests at the Microbial Hygiene Laboratory and send you a reliable water quality inspection certificate.
As a specialized analysis company, we assist in confirming safety and security.
Why not switch from traditional probing rod surveys to drone inspections?
We are conducting specific voluntary inspections of power press machinery.
We accept repairs, modifications, and inspections of machinery.
"CRism" is an IoT system for heat treatment equipment. It allows you to set reference values and issue alerts for all data being collected.
We accept orders for aerodynamic testing and evaluation for two-wheeled and four-wheeled vehicles, heat exchanger and shroud testing and evaluation, and the production of wind tunnel testing equipment.
We have a proven track record in analyzing harmful substances in products, as well as various chemical substance analyses!
We are conducting evaluation tests and quality tests for water treatment chemicals!
Document investigation through design documents and on-site visual inspection! Asbestos analysis in accordance with JIS standards and others.
Leave the analysis of DecaBDE and UV-328 in products to Naito Environmental Management!
We will conduct evaluations of adhesion and scratch susceptibility using three types of scratch testing machines with different measurement ranges.
Inspection using DeepSky's inspection function! Here is an example of a simple verification of component damage.
Confirm that it does not belong to B. anthracis / Estimate whether it is a species that falls under BSL2 within the B. cereus group / Diarrheal toxin and emetic toxin tests.
Analysis of physicochemical components in feces / organic acids (short-chain fatty acids), decomposition products, IgA, bile acids, etc. / Feces and gastrointestinal contents from humans, mice, pigs, etc. can also be accepted.
Samples can be stored at room temperature in a preservation solution / Easy to handle with swab type / Can collect skin microorganisms from various areas such as the face, arms, and back.
A rich lineup from rapid identification (MALDI & Rapid) to other microbiological tests!
Analysis of hazardous substances in industrial waste! Sludge and industrial waste analysis at the Hyogo Analysis Center.
Meeting a wide range of customer requests! Environmental surveys and contaminated soil investigations at the Hyogo Analysis Center.
We also accept cleaning of motors and components only!