Single inline type with a trans connection method! Achieved miniaturization and low cost.
±5V input/output, compact, and low cost! Usable for various purposes such as AC detection and magnetic bias detection.
Four models in the lineup! Achieving more accurate measurements by reducing the impact of sensor weight.
This is product information from Cremat, focusing on charge-sensitive preamplifiers for capacitive sensors.
Adopted by major amp manufacturers in the UK and the USA! High-quality vacuum tubes that have passed rigorous testing.
Round-edge designed aluminum audio chassis with 4 extruded aluminum frames.
We will work on product development with an eye on the needs of the next generation.
Connectable to major PLC manufacturers' units! Achieving visualization of vibrations and IoT sensing.
Realization of waterproof type in built-in amplifier 3-axis accelerometer sensor.
We can configure the conditioning amplifier according to your preferences!
Introducing a preamplifier with a BPF of 40kHz, GAIN of 30dB, and an output connector of BNC!
14-pin MSA package! Designed for applications such as medical imaging, inspection, and measurement.
A4 size, approximately 3kg, compact speaker with a maximum of 5 microphones! It becomes a meeting minutes creation support tool through soft integration! Certified with the technical standards mark.
Four-terminal measurement is now possible in limited installation space! Supports higher current values!
The DLPCA-200 is a high-end current amplifier optimized for DC measurements and time-resolved measurements down to microseconds.
A convenient drive amplifier that boosts the output of a signal generator. Full power band of 1MHz. Low cost, high functionality, high impedance input.
Common mode noise removal capability, low offset, high gain accuracy and stability are volatile!
High precision, low price! Charge amplifier for vibration measurement that can use various detectors.
This is a narrow linewidth CW laser using an in-house developed fiber DFB module.
Non-linearity 0.05% - Guaranteed accuracy over a wide temperature range! ±10V wide input - High-performance isolation amplifier.
High voltage direct input type! Compact high voltage isolation amplifier with voltage divider resistor.
This is an ultra-low distortion rate oscillator module that serves as a standard for strain measurement.
This is a two-pole ultra-low distortion amplifier module developed for measurement purposes.
This is an amplifier module that automatically switches gain based on the input voltage.
Simply connect with an 8-pin M12 connector cable, allowing anyone to easily wire without the need for tools!
The low-noise amplifier series can be used at specific frequencies within the frequency range of 100 MHz to 15 GHz. Please contact us for your desired specifications.
Low cost, high reliability! Providing solutions that minimize SWaP-C (Size, Weight, Power, Cost).
We have started offering a 20W stereo Class D audio amplifier with a power limit feature.
Art pieces made from vacuum tubes! High quality achieved through handmade craftsmanship.
Maximum rated input power +27dBm CW, NF 1.6dB, 3mm QFN 500KHz~3GHz, low noise amplifier
We introduce the power supply of +16V/1.7A and the WR-15 "GaN Millimeter Wave Power Amplifier (+32dBm)"!
If you are looking for an authorized distributor of 3PEAK products, please contact Eitoku International. Short delivery times and high-quality assurance. Feel free to inquire.
Small items and high precision are one of our company's strengths, and we can provide samples of magnets for free.
Low noise preamplifier with input conversion noise voltage of 5nV/(Hz^0.5), adjustable gain, ideal for detecting small signals! [Custom specifications available]
Unique touchscreen interface and embedded Windows PC
You can configure a flexible and diverse high-output ultra-short pulse laser!
Three models are available! They can be used to amplify femtosecond, picosecond, and nanosecond pulses with just one unit.
Wireless amplifier with CD/SD/USB/Bluetooth, a digital all-in-one speaker with interference countermeasures! Certified with the technical standards mark.
![Rebound - Logo - On white[2].jpg](https://image.mono.ipros.com/public/company/image/a55/2090280/IPROS12301427208103016948.png?w=280&h=280)
NOVOSENSE Microelectronics is a high-performance analog and mixed-signal IC design company.
Achieving stable high-speed drive and high-precision control.
Voltage output, high/low side measurement, bidirectional, zero drift series 'INA240'
325W Stereo High Performance, High Definition, Class D Amplifier 'TPA3255'
Single power supply low power consumption, wide bandwidth, voltage feedback operational amplifier "OPA830"
MPPT-equipped solar battery charge and discharge controller
Achieve higher measurement accuracy in a wide range of applications! Supports an extended temperature range.
Ideal as an angle and speed measurement tool using resolvers! Compatible with a variety of resolvers!
Available for use at the rotating part! Directly attach to the slip ring.
Supports analog output! Compact design for easy portability. For accurate temperature measurement. Materials available upon request.
For those struggling with temperature management of rotating bodies and strain measurement in mixers, extruders, etc.! Easy to install!
Compact and highly reliable, usable even in poor noise environments.
Even with different gain settings, the bandwidth remains constant, making it very useful for measuring high-speed signals and pulses.
Designed for high-speed and precise measurements requiring a high dynamic range.
Low noise with high gain and wide bandwidth (up to 2GHz), ideal for time-resolved measurements using ultra-fast photodetectors.
Shock-absorbing, non-slip silicone band with round design aluminum case!
Ideal for low-cost process embedded applications!
Introducing the PRO audio equipment control RS485 buffer-equipped distributor SS-485-XLST10P-ACW!!
The VAC series allows for digital settings of various configurations such as NULL, GAIN, and output values using a computer or dedicated touch panel.
1. Maximum pressure 35 MPa 2. Balanced piston type proportional pressure control valve
Improvement of fuel efficiency through shortening of time cycles and lightweighting of system components.
Smooth setup and operation with USB control and multi-language support.
Flexible construction is possible according to the number of axes used, compatible sensors, and operational specifications.
Equipped with a 24-bit A/D converter, achieving nano-resolution, capable of parallel control of up to 12 channels.
Dedicated to PI hexapods, intuitive operation is easy with standard software.
Provides the precision and stability necessary for high-accuracy monitoring of motor current!
Operates immediately with AC100V power! An ideal insulation amplifier for testing and research, with free demo units available for loan!
By removing the common-mode input voltage up to ±500V and extracting the differential voltage, the configuration of the measurement system becomes simpler!
Amplify important weak signals to the necessary magnitude without degrading them!
No compensation lead or special terminal required - 4-channel thermocouple amplifier!
No compensation lead or special terminals needed - analog/digital output thermocouple amplifier!
DC amplifier with built-in bridge excitation power supply for strain gauge sensors.
By combining RF mini-modules, you can easily build experimental and evaluation systems for 5G and 6G.
An amplifier that achieves both beam stability and process control without compromise!
Introducing high-power lasers that can be used for various applications such as processing, measurement, and fundamental research!
Starting with our in-house developed DFB fiber modules, we offer a lineup of narrow linewidth, high-output fiber lasers, as well as nanosecond ultra-compact lasers and optical amplifiers!
This is a narrow linewidth CW laser using an in-house developed fiber DFB module.
This is a narrow linewidth CW laser using an in-house developed fiber DFB module.
This is a narrow linewidth CW laser using an in-house developed fiber DFB module.
This is a narrow linewidth CW laser using our in-house developed fiber DFB module.
This is a fiber amplifier for narrow linewidth CW lasers. It is an ideal device for long-distance coherent communication and coherent Doppler LIDAR.
This is a narrow linewidth pulse laser using our in-house developed fiber DFB module.
It is a compact pulse fiber laser developed for LIDAR applications.
This is a compact pulse fiber laser developed for LIDAR applications. It can be easily controlled due to the built-in microcontroller.
It is a passive mode-locked fiber laser with a 1064nm wavelength, 5ps pulse duration, and PM fiber output.
It is a high-power single-mode continuous wave fiber laser.
It is an optical amplifier for narrow linewidth lasers. The output will be a maximum of 2W.
This is a chirped FBG for fiber lasers. It supports power up to 50W.
It is an ultra-high repetition active mode-locked laser capable of up to 40 GHz.
It is a photodiode and photoreceiver capable of withstanding harsh space environments such as extreme temperature changes and ultra-high vacuum.