Simultaneously achieve heating of cold drainage water and cooling with well water. Effectively utilize waste heat to reduce boiler usage, resulting in a reduction in running costs that exceeds the initial investment.
It is a heating device that uses a boiler. Its characteristic is that it provides a comfortable environment through radiant heat.
The size of the heat exchanger ranges from 100mm to 4000mm, and it can be customized to accommodate natural refrigerants and alternative refrigerants.
A sheet primarily composed of alkali Earth Silicate fiber (AES fiber/biocompatible soluble fiber), that possesses heat resistance up to approximately 1100°C to 1300°C.
Achieving top-class industry capabilities and COP! Featuring a wide range of screw condensing units.
New proposal for CUI prevention. Insulation and cooling material exterior using adhesive sheet/tape method with multilayer film substrate. (5-layer type)
From the back, it looks "neat," and from the front, it looks "solid"! Extremely energy-efficient and contributes to environmental protection.
Heat recovery can reduce electricity costs. The "Hopper Dryer (Heat Recovery Unit)" can reduce electricity costs by 20-30%!
Creating hot water with the heat of the sun. Next-generation water heating system operating at 70W and 100V.
85% reduction in CO2 emissions! Various benefits can be expected in terms of cost and the environment.
New refrigerant R448A adopted! Easy to restart for soft start, demonstrating excellent energy-saving performance according to load.
40% increase in cooling capacity with inverter boost! A new proposal for combating global warming.
Compared to straight tube type, the thermal efficiency is higher than that of straight tube type! *For heating, cooling, latent heat recovery, etc.
Scraper-type heat exchangers capable of wide-ranging applications due to their adaptability to diverse demands.
This one machine will significantly reduce fuel costs!!
Reusing "unused" heat! We will explain the specific process of generating "cold water" from "heat."
High-efficiency heat dissipation. A next-generation plate heat exchanger created with unique know-how!
By using a multi-leaf structure for the inner pipe cross-section of the double pipe, the heat transfer area increases and the heat transfer rate improves!
Can't remove the scale from the cooling tower? Then, try this.
Our original brand developed with energy conservation and cost-effectiveness in mind!
Since the heat transfer surface per unit length is large, it is a compact and lightweight pin tube type heat exchanger.
Even at an outside temperature of -20°C, circulation heating is possible with a hot water temperature of 75°C! Using low GWP refrigerant R454C.
If you have any new initiatives or concerns regarding heat, please feel free to consult with us!
Eliminating concerns about congestion, a challenge in a new area of heat recovery! Introducing our multi-gap plate heat exchanger.
It is a compact heat exchanger that is resistant to dirt. If you are having trouble with maintenance of shell and tube or plate heat exchangers, please consult us.
Utilizing unused thermal energy from exhaust and groundwater, along with the technology developed through "hot water," to contribute to energy conservation, CO2 reduction, and measures against heat and cold!
We have established a system to support various matters related to heat exchangers!
Expand the heat transfer area with a vertical installation! Moreover, since the installation area can also be reduced, it contributes to space-saving as well.
A binary power generation system that can generate electricity with water at around 70 degrees Celsius.
Comprehensive catalog of heat exchangers. We support your company with high-quality heat exchangers.
Combining the functions of a condenser and an evaporator! Capable of providing a controlled and comfortable indoor environment.
The gasket during flange release suppresses the sticking of the packing, significantly reducing flange cleaning time!
Based on examples from the material-based manufacturing industry, this explains a strategy for systematically organizing waste heat recovery, power generation, and high-efficiency technologies to achieve both cost reduction and CO₂ reduction simultaneously.
It can be used for applications such as heating treatment of pseudoplastic fluids and products that are prone to thermal deformation.
Adoption of ultra-low GWP refrigerants! Introducing the next-generation inverter turbo refrigeration unit series.
Optimal results with efficient and reliable heat exchangers for beverage factories.
No gasket means maintenance-free! It is compact and demonstrates high heat transfer performance.
We propose a system that can solve water-related issues using stainless steel products!
Standard equipment designed for cold weather! Achieves insulation and heating with air heat, featuring excellent environmental performance for hot water circulation.
Introducing the four main applications and case studies of Airec's heat exchangers!
Heat exchanger solutions suitable for all applications.
Achieving the highest level of sanitary standards, gentle product handling, and efficient cleaning is possible!
Gas without dust - it is intended for heat recovery using a gas system.
The platform also implements measures against fan vibrations! It is possible to design cooling pipes with different materials according to the application.
Ideal for brazing with a pipe fitting. Just set the ring material. After that, it can be brazed with just the heating time.
A completely sanitary structure with no liquid accumulation areas at all.
Lightweight and compact / A device that can heat fluids without being limited to a specific installation location!
Responding to various industries with a wealth of implementation and diagnostic achievements. Aiming for energy conservation, CO2 reduction, and lower utility costs.
We provide "thermal solutions" with plate-type heat exchangers as our core technology.
We provide products that meet your needs with high quality! We contribute to engine cooling.
Is it the same mechanism as limescale? The reason why scale buildup reduces boiler efficiency.
Can't remove the scale from the cooling tower? Then, try this.
High corrosion resistance, space-saving, high reliability immersion heat exchanger.
We provide a lotus-type metal component with excellent thermal conductivity achieved by combining different materials.
Easy maintenance with a simple structure! A comprehensive catalog is available for selecting models based on the required thermal energy.
Utilizing high-temperature heat source gas, preheated gas can be heated up to 650°C!
This is a factory-oriented spot cooler that can be easily used with a single-phase 100V specification. It offers a comfortable working environment without heat discharge.
Connect the ducts to deliver cold air to up to 7 locations! Recommended for customers with high heat dissipation in their factories.
High-grade metals that cannot be joined can be bonded using the power of explosives.
Compact and easy to install! A Taiwanese manufacturer of brazed plate heat exchangers with high performance, high quality, high reliability, and cost competitiveness.
Adoption of corrugated tubes! A compact and highly efficient double-tube heat exchanger that is strong in environments with poor water quality.
It is suitable for heat recovery from gas or steam under pressure, as well as compressed air!
Carefully selected from products confirmed for safety! Suppresses the occurrence of sterilization and biological slime!
A sheet material primarily composed of alumina fiber (PCW/crystallized alumina short fiber).
Multi mesh pipe bundle (89mm width)! Designed for heating and cooling metal surface treatment solutions.
We provide efficient and highly reliable liquid cooling components and systems.
Ideal for process air conditioning! A heat exchanger used as a heater to heat air.
Independently developed plate fin manufacturing machine! Fin tubes that can be combined.
Installation is easy, requires no adjustments, and is maintenance-free.
We have published numerous examples of work, including scenes of water tank cleaning and before-and-after images, using photos and illustrations.
We manufacture heat exchangers in various fields using a diverse range of materials and shapes.
Common issues with heat exchangers: thread seizing, fluid leaks, and loose threads!
There is a proven track record of adoption in large machinery manufacturers' small-scale methanation devices! We also support processing lengths of up to 3,500mm.
Compact and suitable for placement on a workbench! Can be used for applications such as food/beverage and healthcare/cosmetics.
We meet the needs for chemical products, food, and environmental equipment!
Supports up to 1100 kW! Compact and reduces fuel costs! High heat transfer efficiency compared to shell-and-tube heat exchangers! Reduces CO2 emissions too!
Our company's developed non-silicone, acrylic-type heat dissipation sheet (thermal conductive sheet) has undergone a complete lineup renewal!
Leave it to us for fans and total heat exchangers!
The boundary river industry of heat exchangers is a factory authorized for the manufacture of boilers and first-class pressure vessels.
This is a heater that generates warm air using the latent heat of saturated steam.
By shaping the Pyromax Super into a coil form, space-saving and efficiency in processing through rapid heating are achieved.
Adopting a double gasket system! Achieves a high thermal conductivity coefficient and demonstrates excellent heat transfer performance.
Uses ultra-thin titanium tubes! Suitable for heating and cooling hot spring water and well water.
Contributing to energy conservation through the efficient use of thermal energy.
Utilization of reasonable thermal energy.
![header-logo[1].jpg](https://image.mono.ipros.com/public/company/image/9df/2028561/IPROS1242123786424575024.jpg?w=280&h=280)
Ideal for hot water heating for road heating! Insert into the tank to heat or cool the solution.
New type of plate heat exchanger for food factories. Made of 100% stainless steel.
New type of plate heat exchanger for beverage factories. Made of 100% stainless steel.
Heat Exchanger for Water and CIP Solutions for Beverage Factories
Simply recover heat to reduce energy consumption and contribute to the SDGs.
For improvements in lightweight design, thermal conductivity, and electrical conductivity, aluminum (Al) porous (low-density) sintered metal is recommended.
From precision products to large structures for maritime transport, a specialist in non-ferrous metal processing!
VentureClad™ Exclusive Seaming Tape (Joint Bonding Tape, 3-Layer Type)
It is a material that contributes to the reduction of CO2 and energy conservation, providing insulation, cooling, and condensation prevention.
Improving maintainability! Ceramic coating (Sera Armor) on plate-type heat exchangers (plate section).