Chuck Product List and Ranking from 34 Manufacturers, Suppliers and Companies

Bernoulli Chuck for Soft Contact Lenses

I will transport the wet soft contact lenses.

We transport water-containing soft contact lenses. The "soft contact lens transfer device" uses air ejection to create negative pressure through the ejector effect, Bernoulli effect, and Coanda effect for lens suction grip, and generates positive pressure through a pressure chamber air action effect to release the lens, balancing the gripping contact force to gently hold and transport the contact lenses. All operations are performed using the action of airflow, ensuring that the flexible contact lenses are transported without damage.

Company：ソーラーリサーチ研究所大阪事業所
Price：100,000 yen-500,000 yen

Other conveying machines
Conveyor
Transport and handling robots

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-contact chuck

Non-contact chuck of the vertical gas jet method at the Solar Research Institute.

The "non-contact chuck" of the Solar Research Institute's vertical gas jet method can suspend and transport glass substrates in a non-contact state by ejecting air towards the glass substrate, allowing it to float in mid-air. ● Compatible with a wide variety of workpieces Users come from various industries, including semiconductors, FPD, polarizers, films, optics, electronics, paper, and textiles, with delivery records reaching several hundred. The size of the workpieces ranges from chips/lenses a few millimeters square to glass several meters square, with thicknesses also varying from a few micrometers. The characteristics of the workpieces are diverse, including warped wafers, through-holes, breathable and flexible workpieces, and surface-coated workpieces.

Company：ソーラーリサーチ研究所大阪事業所
Price：Other

Wafer
Pneumatic Equipment
Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super fine 1.4mm x 55mm ultra-thin long work Bernoulli chuck.

A Bernoulli chuck for non-contact transport of ultra-thin, long workpieces measuring 1.4 mm in width and 55 mm in length.

New method for non-contact suction of ultra-fine and long workpieces: Adoption of the vertical gas jet method (VGF method). The Bernoulli chuck "Float Chuck SA-CL series" has newly adopted the vertical gas jet method (VGFS) to efficiently suction ultra-fine and long workpieces. The vertical gas jet method reduces friction loss of the gas flow in the cushion chamber by vertically jetting the gas flow emitted from the nozzle, enhancing the effect of negative pressure generation, significantly increasing the suspension capability compared to conventional types, thereby improving the holding stability and resistance to impact, while nearly halving gas consumption.

Company：ソーラーリサーチ研究所大阪事業所
Price：500,000 yen-1 million yen

Wafer processing/polishing equipment
Wafer
Separation device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Permanent magnet chuck

Permanent magnet chuck ideal for machining superhard materials.

【Size】87x104x65mm 【Working Area】55x90mm 【Pole Pitch】8mm 【Weight】4.5kg *The stopper is included as a standard accessory and can be attached to either side in the X direction.

Company：サンアイ精機
Price：100,000 yen-500,000 yen

Inspection fixture
Processing Jig
Chuck

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super Powerful Compact Magnet Chuck SM-H Series

[New Release] Super powerful magnet chuck with a simple design.

■Both the stationary type and the pallet type can be compatible with both System 3R and EROWA (additional fees apply). ■Only the pallet type can have a handle attached (additional fees apply). ■A lever and stopper are included. If you have any other questions, please feel free to consult with us.

Company：サンアイ精機
Price：100,000 yen-500,000 yen

Mold Design

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Robot parts lever chuck (Harmo manufactured)

We offer a plastic type that achieves weight reduction and a die-cast type that excels in durability.

A lever chuck that achieves space-saving, lightweight design, and high cycle performance with a compact oval cylinder.

Company：日本ピスコ
Price：Other

Other industrial robots
Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heinbuch internal diameter gripping collet chuck / mandrel chuck

Supports various turned parts such as shaft components, disk and flange parts, bar materials, gear components, and other irregular materials for lathe processing.

1. High rigidity: Maximum clamping force of 150 kN (standard) 2. High gripping power: Minimum clamping width of 2 mm (standard) 3. High setup efficiency: Bush replacement time: Minimum 30 seconds 4. Compatible with small diameters (φ8 and above) 5. Repetition accuracy: 0.010 mm 6. Maximum rotation speed: 8000 RPM 7. There is no metal connection in the mandrel bush, allowing for strong clamping. 8. Various components are designed and manufactured domestically, and we respond to various requests.

Company：NKワークス
Price：Other

lathe
Processing Jig
Chuck

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heinbuch hydraulic collet chuck for machining centers

Shaft components, disc and flange components, bar materials, gear components, and various other automotive parts, as well as hydraulic equipment parts and irregular materials are also supported.

1. High rigidity: Maximum clamping force of 150 kN (standard) 2. High gripping power: Minimum clamping width of 2 mm (standard) 3. High setup efficiency: Collet change time: 30 seconds 4. Repeat position accuracy: 0.010 mm 5. There is no metal connection to the collet, allowing for strong clamping. 6. Clamping around the entire workpiece results in minimal distortion. 7. Various components are designed and manufactured domestically, and we respond to various requests.

Company：NKワークス
Price：Other

Machining Center
Processing Jig
Chuck

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SwissCHUCK Compensation Chuck_Swiss Chuck

Thanks to its advanced mechanism, it can evenly grasp irregularly shaped workpieces! A high-precision chuck designed so that force is not applied until it securely grips at the correct position.

The Swiss chuck (formerly Forkart Swiss) compensation chuck OVEKA/KA has been developed for crankshaft machining and has a proven track record. After several years, this chuck has been further improved to accommodate all types of shaft machining. These chucks are designed to apply no force until the workpiece is securely held in the correct position. Thanks to the advanced compensation mechanism, they can evenly grip workpieces that are not perfectly round. Designed compactly, they effectively utilize the distance to the center. Therefore, the compensation chuck OVEKA/KA can be considered the optimal chuck for grinding operations using a center. In an environment where stable machining is required, the Swiss chuck's compensation chuck features a sealed structure to prevent contamination. The hydraulic drive type OVEKA is equipped with a patented lubrication circulation system. Since the internal components of the chuck are always lubricated during gripping, it achieves maintenance-free operation, extending the chuck's lifespan and reducing costs.

Company：NKワークス
Price：1 million yen-5 million yen

Grinding Machine
lathe
Gear cutting machine/Gear finishing machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SwissCHUCK Tool Grind Chuck_Swiss Chuck

Contributing to improved productivity and cost reduction! A high-precision chuck boasting the best runout accuracy in the manufacturing and regrinding of end mills ranging from φ5 to 20mm.

When manufacturing high-precision products, high-performance tools are always required. The TCG PRO precision tool grind chuck meets these demands. It guarantees the highest runout accuracy for regrinding end mills, drills, bits, taps, and reamers ranging from φ5mm to 20mm. Inside the TCG PRO, lubrication air purging prevents contamination. This allows sliding components to achieve permanent lubrication, ensuring long life and high quality. Additionally, the clamping blade achieves low wear. The diverse accessories of TCG PRO can be effectively used in both general-purpose and NC applications, accommodating a wide range of scenarios. It is based on two types: the air-driven FTGC and the TGC driven by a pneumatic cylinder.

Company：NKワークス
Price：1 million yen-5 million yen

Grinding Machine
lathe
Gear cutting machine/Gear finishing machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HWR 4-Jaw Chuck with Correction Function - INOFlex

Germany's HWR company's 4-jaw chuck with correction function!

HWR's "4-Jaw Chuck INOFlex" securely clamps various workpieces regardless of their shape, material, or type of machining, using four jaws and a patented correction mechanism. 【Features】 ■ Patented technology ■ Holds cylindrical, square, and irregular workpieces ■ Concentric correction clamping within ±3μm ■ Usable with all CNC machine tools ■ Compatible with diameters from 130mm to 2,000mm ◎ For more details, please download the catalog or feel free to contact us.

Company：NKワークス
Price：Other

Assembly Jig
lathe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Parts handling equipment hollow hole three-jaw parallel chuck dust-proof type

A large three-jaw parallel chuck with a low height, lightweight design, and a large hollow hole at the center of the body.

The hollow hole three-jaw parallel chuck has a long and rigid finger guide, allowing for the attachment of long accessories. It is a large three-jaw parallel chuck that is low in height and lightweight, with a large hollow hole at the center of the body. A dust seal is installed on the sliding part to prevent the intrusion of chips and other debris. We also offer spacers for replacement with the equivalent product from NKE Corporation, the "CH120 series." For more details, please contact us or refer to the catalog.

Company：ＮＫＥ
Price：Other

Transport and handling robots

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vacuum chuck (pneumatic)

No vacuum pump needed; just supply air from the compressor, and a suction-capable fixture is here!

The vacuum chuck (pneumatic) is a fixture that can accommodate the clamping of non-magnetic workpieces such as aluminum, stainless steel, and copper, where magnetic chucks cannot be used. It does not require a vacuum pump; it can be suctioned simply by supplying air from a compressor. *For more details, please download the catalog or contact us directly.*

Company：ナベヤ
Price：100,000 yen-500,000 yen

Chuck
Vice Clamps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

MTB Magnetic Chuck for Milling Processing Catalog

Reduce setup time with one-touch clamps and consolidate processes by minimizing tool interference!

The MTB magnetic chuck clamps the workpiece at high speed from below with strong magnetic force. Additionally, it has minimal interference with fixtures, allowing for five-sided machining with a single chucking, and can be freely arranged using multiple units to match the machine table.

Company：ナベヤ
Price：Other

Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chuck Product List and Ranking from 34 Manufacturers, Suppliers and Companies

Chuck Manufacturer, Suppliers and Company Rankings

Chuck Product ranking