Furnace Product List and Ranking from 407 Manufacturers, Suppliers and Companies

High-frequency induction furnace F-MELT100G that achieves energy saving for electric furnaces.

Consolidating energy-saving and power electronics technologies in high-efficiency induction furnaces to contribute to carbon neutrality in industrial furnaces.

In foundries, there is an active movement to promote energy conservation and carbon neutrality. These are important management issues that lead to reduced environmental impact, cost savings, and enhanced corporate value, and it is believed that efforts to address environmental issues will continue across various industries in the future. On the other hand, energy-saving activities at the operational level in foundries have been undertaken for some time. To aim for further energy savings and reductions in CO2 emissions from the current situation, more in-depth initiatives and capital investments, such as restructuring production and business processes, are necessary. When promoting energy conservation and carbon neutrality in foundries, there are methods such as converting the heat source of industrial furnaces and switching to high-efficiency electric furnaces/induction furnaces. This is expected to improve energy unit consumption and reduce CO2 emissions/environmental impact. The product that addresses this challenge is the high-frequency induction furnace F-MELT100G, which consolidates Fuji Electric's energy-saving and power supply technologies. It achieves high efficiency, energy conservation, and safe and secure operations, contributing to energy conservation in foundries and the promotion of carbon neutrality in industrial furnaces.

Company：富士電機パワエレ営業本部　産業ソリューション統括部
Price：Other

Electric furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contributing to the carbon neutrality of industrial furnaces: Case study of high-frequency induction furnace introduction.

Realization of energy savings and CO2 reduction through the transition from cupola furnaces to electric furnaces/high-frequency induction furnaces.

Case study of the introduction of electric furnaces (high-frequency induction furnaces) and furnace operation monitoring systems. The challenges prior to implementation included building a manufacturing system aimed at decarbonization and green growth strategies, as well as achieving energy conservation and CO2 reduction. The transition from a cupola, which uses coke as a heat source, to an electric furnace, which uses electricity as a heat source, has led to reduced environmental impact, improved quality and safety, and stabilized the supply of maintenance parts.

Company：富士電機パワエレ営業本部　産業ソリューション統括部
Price：Other

Electric furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study: Mitigating Production Downtime Risks and Improving Productivity through the Upgrade of High-Frequency Induction Furnaces

The update of the existing induction furnace eliminates the risk of production stoppage due to obsolete parts and enhances customer value. The melting time is dramatically shortened, and productivity is improved by up to three times.

Case study of the introduction of a high-frequency induction furnace. In a certain foundry (iron and metal products), the existing high-frequency induction furnace had aged, increasing the risk of production stoppage due to obsolete parts. Therefore, by updating the high-frequency induction furnace, we avoided the risk of production stoppage caused by obsolete parts, dramatically reduced melting time, increased melting volume, and improved production efficiency through enhanced material production efficiency. We also achieved improvements in the working environment and safety.

Company：富士電機パワエレ営業本部　産業ソリューション統括部
Price：Other

Casting Machine
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rotary Electric Furnace "RBF Series"

Rotary electric furnace equipped with a secondary combustion chamber to prevent pollution and odors caused by exhaust smoke.

The "RBF Series" is a rotary electric furnace developed specifically for lost-wax casting, capable of high-efficiency wax removal and sintering of molds. It is equipped with a system that retrieves molds in the shortest distance possible. You can save up to 20 different recipes with a maximum of 8 steps of parameters tailored to various metals, designs, and investment materials. 【Features】 ■ Easy-to-use touch panel ■ Uniform distribution of firing temperature ■ Afterburner ■ Over-temperature prevention device *For more details, please download the PDF or feel free to contact us.

Company：安井インターテック甲府支社
Price：Other

Electric furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-cooled high-speed combustion incinerator "L + WIDE type"

It is a dioxin countermeasure incinerator with a wide 1m inlet.

The "L + WIDE type" is a water-cooled high-speed combustion incinerator designed for continuous loading with a wide design. Thanks to its extra-large loading opening of 1m wide by 65cm high, it can accommodate pallets, wooden frames, and molds without the need for pre-cutting with a circular saw. Additionally, the provision of air through high-pressure multi-air injection achieves remarkable high-speed combustion and ensures safe smokeless incineration. 【Features】 ■ Exceptional high-speed combustion and reliable environmental performance ■ Smokeless high-speed combustion ■ Outstanding workability ■ No notification required to authorities ■ Meets all dioxin countermeasure structural standards, etc. *For more details, please download the PDF or feel free to contact us.

Company：雅
Price：Other

Incinerators and incinerators
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Blackbody furnace body temperature reference Nightingale

The Nightingale Body Temperature Reference (BTR) black body system provides a low-cost, easy-to-operate heat source for human body temperature detection.

The Nightingale source is primarily designed to be incorporated into COVID-19 related thermal imaging temperature screening systems. The Nightingale temperature standard functions by providing a visible thermal reference area for infrared (thermal) camera systems to detect fever in individuals being tested for the coronavirus. The Nightingale BTR source features a "Set & Forget" configuration. The operator simply configures the reference source via a USB interface and saves the settings to non-volatile memory. After configuration, the black body automatically controls to the set values every time it is powered on. The status LED visually indicates that the reference is stable and ready to be used as a calibration source. The performance of the Nightingale is optimized for various absolute temperature set points and ambient conditions required by most temperature screening systems. The Nightingale BTR source complies with IEC 80601-2-59.

Company：オプティカニクス本社
Price：Other

Temperature and humidity measuring instruments
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AP Smokeless Incinerator "F Series Phoenix"

It is receiving overwhelming support! It is a notification-free type and is actively thriving in various fields across the country.

The "F Series Phoenix" is an AP smokeless incinerator that has changed the image of incineration furnaces. It is equipped with a combustion assist device that operates at over 800°C, allowing for precise feeding in a state isolated from outside air. Additionally, it features a temperature display via a temperature controller, enabling energy-saving and cost-effective operation, and is equipped with a high-performance, high-pressure blower necessary for combustion. 【Features】 ■ No notification required type ■ An incinerator that has changed the image of incineration furnaces ■ Actively used in various fields across the country ■ Has overwhelming support *For more details, please refer to the related links or feel free to contact us.

Company：日本セラテック
Price：Other

Incinerators and incinerators
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AP Smokeless Incinerator "CX-45 Model"

Equipped with a high-performance cyclone dust collector! It allows for precise dosing in a state isolated from outside air.

The "CX-45 type" is a smokeless incinerator that suppresses the generation of dioxins through high-temperature combustion and allows for the incineration of plastics without the need for notification. It comes equipped with a high-performance cyclone dust collector and an auxiliary combustion device for burning at temperatures above 800°C. Additionally, the structure prevents contact between the interior of the incinerator and the outside air, except at the air intake and the tip of the chimney, and it is equipped with a high-performance, high-pressure blower necessary for combustion. 【Features】 ■ No notification required ■ Suppresses dioxin generation through high-temperature combustion ■ Equipped with a high-performance cyclone dust collector ■ Capacity of 50 kg/hr or less, furnace floor area of 0.5 m² or less ■ Economy & Ecology *For more details, please refer to the related links or feel free to contact us.

Company：日本セラテック
Price：Other

Incinerators and incinerators
Furnace

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AP Smokeless Incinerator "CX Series"

Easy operation in a horizontal format! It can supply the appropriate high-pressure combustion air.

The "CX Series" is a smokeless incinerator recognized by government offices for its outstanding high-temperature combustion. It can supply appropriately high-pressure combustion air, enabling smokeless and odorless complete combustion. Additionally, it features a horizontal design for easy operation, along with temperature display via a temperature controller, energy-saving, and cost-effective operation. 【Features】 ■ Outstanding high-temperature combustion ■ Appropriate high-pressure combustion air supply ■ Smokeless and odorless complete combustion ■ Sufficient residence time in the furnace ■ Easy operation with a horizontal design *For more details, please refer to the related links or feel free to contact us.

Company：日本セラテック
Price：Other

Incinerators and incinerators
Furnace

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rocky rotary drying incinerator

A amazing device that can even burn water! Thanks to its unique combustion method, it has low fuel consumption and can handle composting, drying, and incineration all in one machine.

The "Rocky Rotary Drying Incinerator" is a product that operates automatically from input to ash output, with smoke-free and odor-free operation being standard. The main body of the furnace is made of durable 4.0mm thick stainless steel 304, and the structure of the furnace is extremely simple, making repairs easy in the event of a malfunction. Additionally, it can be designed to accommodate water, sludge, and waste, and can operate continuously 24 hours a day, 365 days a year. 【Features】 ■ Smoke-free and odor-free operation is standard ■ Main body made of durable 4.0mm thick stainless steel 304 ■ Designed to accommodate water, sludge, and waste ■ Extremely simple structure for easy repairs in case of malfunction ■ Capable of continuous operation 24 hours a day, 365 days a year ■ Low fuel consumption due to unique combustion method *For more details, please refer to the related links or feel free to contact us.

Company：日本セラテック
Price：Other

Incinerators and incinerators
Furnace

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rotary Kiln Incinerator "GPR-200"

Excellent combustion efficiency with minimal environmental impact, and proper incineration of waste! Combustion energy can be effectively utilized.

The "GPR-200" is a rotary kiln incinerator that can completely combust high-moisture, sludge-like waste, significantly reducing the appropriate incineration processing costs within the company. By processing waste in a unique rotary kiln incinerator with a drum-shaped combustion chamber (which stirs and incinerates while rotating), the generation of dioxins is kept to an extremely low level. It comes standard with an automatic control system, making operation easy, and it can utilize incineration energy to produce hot water. 【Features】 ■ Excellent combustion efficiency and complete combustion of waste with unique rotary kiln incineration technology ■ Outstanding performance that meets environmental standards such as dioxin emission regulations ■ Easy operation with a standard automatic control system ■ Continuous feeding of waste and continuous discharge of incineration ash ■ Ability to utilize incineration energy to produce hot water ■ Exceptional durability due to a simple and robust structure *For more details, please refer to the related links or feel free to contact us.

Company：日本セラテック
Price：Other

Incinerators and incinerators
Furnace

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vacuum drying oven

Improved thermal efficiency with vacuum insulation! Efficient drying is possible in a short time and with energy savings.

The "Vacuum Dryer" is a product that allows for energy-efficient and thermally efficient drying in a short time. By using a double structure for the furnace body and vacuum insulation, thermal efficiency is improved, achieving efficient drying in a short time. By placing the heat source inside the furnace, there is no need to attach insulation material to the furnace body, resulting in a structure that minimizes heat loss. 【Features】 ■ Improved thermal efficiency by using a double structure and vacuum insulation for the furnace body ■ No need to attach insulation material to the furnace body by placing the heat source inside, reducing heat loss ■ Installation of a wind duct and heater inside the furnace to maintain a constant airflow ■ Halved manufacturing costs, enabling efficient drying in a short time *For more details, please refer to the external link page or feel free to contact us.

Company：ニチマン大東工場
Price：Other

Drying Equipment
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Reduction Electric Furnace "SY Series"

Prevents electric shock in case of emergency! Protects the heater from carbon, glaze, and alkalis.

The "SY Series" is a strong reducing electric furnace that prevents carbon adhesion by encapsulating a heater in an alumina pipe, allowing for reduction without worrying about heater breakage. The alumina pipe also has high insulation properties, preventing any risk of electric shock in case of an accident. Additionally, it is effective against harmful combustion gases that can affect the heater, making it usable as a heating furnace as well. 【Features】 ■ Coil heater encapsulated in alumina pipe ■ Protects the heater from carbon, glaze, and alkalis ■ Alumina pipe has high insulation properties to prevent electric shock ■ Inner ceramic board enhances thermal efficiency ■ Burner port can be positioned at the front *For more details, please refer to the PDF document or feel free to contact us.

Company：東京陶芸器材
Price：Other

Electric furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Top-loading electric furnace "TY Series"

Necessary and sufficient performance! If it is difficult to deliver the finished product, we will construct it on-site.

The "TY Series" is a standard model top-loading electric furnace. The top lid opens, allowing for loading from above. Inside the columns at the back of the furnace, there are weights that enable the lid to be opened and closed with minimal effort. Additionally, larger models are equipped with a winch and steps to facilitate easier loading. The structure of the top lid is specially constructed with ceramic modules, which prevents deterioration and collapse over time, unlike methods that involve hanging bricks or ceramic boards. 【Features】 ■ Compact ■ Standard model ■ Sufficient performance as needed ■ The top lid can be easily opened using weights ■ Burner ports can be positioned at the front *For more details, please refer to the PDF materials or feel free to contact us.

Company：東京陶芸器材
Price：Other

Electric furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Door-type electric furnace "TY-SD Series"

The door is securely welded to a 60mm diameter pipe using bearings! It will not tilt even after years of use.

The "TY-SD Series" is a door-type electric furnace with a wall thickness of 186mm. By opening and closing the front door, loading from the front allows for easy handling of large works without the need to bend down. The furnace wall consists of 180mm of fireproof insulating bricks and 6mm of silica board, totaling 186mm, while the ceiling is insulated with arch bricks and ceramic fiber. 【Features】 ■ Improved workability with front loading ■ Arch bricks are used for the ceiling, preventing sagging like ceramic boards ■ The front door is securely welded to a pipe with bearings ■ The door can be made to open either left or right ■ If it is difficult to bring in completed products, on-site construction of the furnace is possible *For more details, please refer to the PDF materials or feel free to contact us.

Company：東京陶芸器材
Price：Other

Electric furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Trolley-type electric furnace "TY-S Series"

Very effective for large works or when there are many! The length of the rail can be adjusted according to the installation location.

The "TY-S Series" is a cart-type electric kiln with a floor that serves as a cart, allowing for the easy loading and unloading of works by pulling it out towards the front. You can check the loading condition of the kiln from the front, back, and sides of the cart, making it very effective for large works or when dealing with a large number of items. A "sand seal" made of silica sand is provided in the gap between the kiln body and the cart to prevent heat loss. Additionally, the power supply to the cart heater uses metal connectors to prevent contact failure during insertion and removal. 【Features】 ■ Wall thickness of 205mm ■ Rotating door ■ Suitable for loading a large number of works or large items ■ The bottom of the cart is insulated with a sand seal ■ Metal connectors are used for the wiring of the cart *For more details, please refer to the PDF materials or feel free to contact us.

Company：東京陶芸器材
Price：Other

Electric furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Factory and Equipment Introduction] Four brazing furnaces (DX and hydrogen) have been introduced.

Heat treatment related: A well-equipped environment supporting Ito Metal Industry.

We would like to introduce our well-equipped facilities and the equipment that supports our company. In the forging and pressing sector, we have "presses for thin plates," "presses for thick plates," and "formers." In terms of heat treatment, we also possess "brazing furnaces (DX and hydrogen)." Additionally, in the cutting sector, we have "CNC lathes," and in the assembly sector, we have numerous pieces of equipment such as "automatic riveting machines" and "laser welding machines." 【Equipment Owned (Partial)】 ■ Presses for thin plates: 12 units ■ Presses for thick plates: 2 units ■ Formers: 5 units ■ Brazing furnace 1 (DX and hydrogen): 4 units ■ Brazing furnace 2 (argon): 1 unit *For more details, please refer to the related links or feel free to contact us.

Company：伊藤金属工業本社
Price：Other

Other processing machines
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Factory/Equipment Introduction] We have introduced one Contreaser Arasa measuring device.

Measurement instruments related to Ito Metal Industry's robust equipment environment.

We would like to introduce our well-equipped facilities and the equipment that supports our company. In the forging and pressing sector, we have "presses for thin plates," "presses for thick plates," and "formers." For heat treatment, we also possess "brazing furnaces (DX and hydrogen)." Additionally, in the cutting sector, we have "CNC lathes," and in the assembly sector, we have numerous machines such as "automatic riveting machines" and "laser welding machines." 【Equipment Owned (Partial)】 ■ Presses for thin plates: 12 units ■ Presses for thick plates: 2 units ■ Formers: 5 units ■ Brazing furnace 1 (DX and hydrogen): 4 units ■ Brazing furnace 2 (argon): 1 unit *For more details, please refer to the related links or feel free to contact us.

Company：伊藤金属工業本社
Price：Other

Other processing machines
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum melting rotary furnace "New Oscillating Rotary Furnace"

A refracting rotary kiln that greatly changes the image of rotary kilns!

The "New Oscillating Type Rotary Furnace" is an aluminum melting rotary furnace that maximizes the characteristics of the oscillating type and can also be used as a holding furnace or stationary furnace. The incredible stirring power increases the melting speed, contributing to fuel savings and improved yield. 【Features】 ■ The large diameter of the furnace opening allows for the input of large materials. ■ The internal surface area of the furnace can change significantly, eliminating deflection. ■ The front pivot design enhances safety and workability. *For more details, please download the PDF or feel free to contact us.

Company：ゼオンノース本社
Price：Other

Aluminum heater
Other environmental equipment
Industrial Furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Strengths of Sanpuku Industries

From consulting on exhaust gases and waste to the installation, repair, and development of environmental machinery! Proposals that meet our customers' needs.

Let me introduce the strengths of Mitsumine Industrial Co., Ltd. Our company provides a total service from "design" to "manufacturing" and "construction," allowing us to offer competitive prices. Additionally, we have numerous achievements with publicly listed companies and have received high evaluations from many customers. With our extensive experience and knowledge since our founding in 1973, we can make suitable proposals. [Mitsumine Industrial's Strengths] ■ Competitive Pricing ■ Numerous Achievements ■ Founded in 1973 *For more details, please refer to the related links or feel free to contact us.

Company：三峰工業
Price：Other

Other machine elements
Mechanical Design
Other contract services
Furnace

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japan Gas Engineering Corporation Company Profile

Creating a more comfortable future with unique and rich technology! We will contribute broadly to society.

Japan Gas Engineering was established as a specialized company for the design, construction, equipment improvement, and maintenance management of production facilities that allow energy to be used safely, efficiently, and cleanly. While looking at the potential of energy, we contribute broadly to society. We provide detailed support for various energy uses. As a pioneer in the gas engineering field, we are expanding our business widely and contributing to the creation of a more comfortable future. 【Business Activities】 ■ Design and manufacturing of drying, heating, melting, and heat treatment furnaces ■ Proposals and modifications of control systems for equipment ■ Research, planning, and construction regarding fuel conversion ■ Equipment maintenance, repair, and energy-saving modifications ■ Support for equipment troubles *For more details, please refer to the PDF materials or feel free to contact us.

Company：日本ガスエンジニアリング
Price：Other

Contract manufacturing
Heating device
Drying Equipment
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Drying Oven "Tangential System"

It is capable of delivering air in layers, characterized by stable and uniform airflow.

The "tangential system" generally refers to a system that uses a horizontal tangential fan, commonly known as a cross-flow fan. *The tangential system is a general term for a wide range of equipment equipped with tangential fans manufactured by the German company LTG, for which we serve as the exclusive distributor in Japan. The temperature distribution inside the furnace is good, resulting in minimal variation in the finishing of the workpieces and improved yield. Additionally, due to the structure of the fan, there is a high degree of freedom in installation, which expands the design options for the equipment and achieves space-saving by eliminating ducts and other components. 【Features】 ■ Can be directly incorporated into the main equipment system, making design simplification favorable ■ No need for large ducts to circulate the heat source throughout the furnace ■ Simple structure allows for reduced startup time *For more details, please feel free to contact us.

Company：トーホーエンジニアリング本社
Price：Other

Heating device
Drying Equipment
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is Toho Engineering?

Over 100 business transactions! We handle a wide range of products, including food-related items, semiconductors, and air conditioning equipment.

Our company is the exclusive agent in Japan for LTG, a company specializing in air conditioning systems, and we handle products that utilize their tangential fans. Since our establishment, we have approximately 40 years of experience in delivering drying furnaces, water-cutting furnaces, and more. Additionally, as we have group companies that are machinery trading firms and manufacturers, we possess various achievements and know-how. We can provide a wide range of proposals that go beyond merely suggesting "furnaces" to meet our customers' essential needs. 【Our Features】 ■ Exclusive agent for LTG in Japan - We handle products that utilize LTG's tangential fans, a prestigious company in the field of fluid dynamics applications in Europe. ■ Wide range of proposals - We have approximately 40 years of experience in delivering drying furnaces, water-cutting furnaces, and more since our establishment. - We can provide a wide range of proposals that meet our customers' essential needs. *For more details, please refer to the related links or feel free to contact us.

Company：トーホーエンジニアリング本社
Price：Other

air conditioning
Furnace

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficient powder coating and electrodeposition coating with a hybrid drying furnace! Contributing to the reduction of furnace length.

Reduce drying time with hybrid heating of infrared and hot air! The furnace body can be shortened.

We propose the "Hybrid Drying Oven" to companies engaged in "Powder Coating" and "Electrocoating." By adding carbon heaters to conventional hot air circulation drying ovens, energy-saving effects and productivity improvements can be expected. Additionally, by adopting carbon heaters with built-in reflective panels that enhance thermal efficiency, CO2 emissions and energy consumption can be reduced. Furthermore, the shortening of the furnace length decreases heat loss due to external thermal conduction, leading to expected energy-saving effects. 【Features】 ■ Electrification ■ Shortened furnace length ■ Energy saving *For more details, please download the PDF or feel free to contact us.

Company：トーホーエンジニアリング本社
Price：Other

Drying Equipment
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Centrosarm Vacuum Solder Reflow Oven

This is a batch-type vacuum reflow furnace compatible with voidless and fluxless reflow. We offer a variety of lineups that support everything from development to mass production.

In conventional atmospheric reflow, there are approximately 20% void areas remaining in the solder, which leads to a deterioration in joint strength. The batch-type vacuum reflow furnace "c.VACUNITE series" from Centrolsam (Germany) can reduce the void areas to less than 2% by using vacuum. Additionally, it can accommodate fluxless reflow by using 100% hydrogen or reducing effect gases such as formic acid. As an option, it also supports plasma cleaning of the bonding surface using MW plasma.

Company：伯東本社
Price：Other

Reflow Equipment
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Centrotherm Ultra High Temperature Bulk Annealing Furnace

By achieving ultra-high temperature treatment and excellent temperature uniformity, batch processing of boule ingots and wafers is possible, minimizing defects and dislocations.

To improve the yield of wide bandgap semiconductor devices, it is necessary to minimize defects and dislocations caused by stress. One of the methods to achieve this is through ultra-high temperature thermal treatment of semiconductor crystals. The c.CRYSCOO HTA high-temperature annealing furnace has been developed to significantly enhance productivity in the value chain from bulk crystals of wide bandgap semiconductors to devices. With excellent temperature control (maximum temperature of 2200°C), uniformity, and low cross-contamination, the c.CRYSCOO HTA demonstrates superior performance compared to conventional furnaces. It is capable of simultaneously processing more than 10 boule ingots or over 100 unprocessed wafers.

Company：伯東本社
Price：Other

Annealing furnace
Other semiconductor manufacturing equipment
Other metal materials
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Carbon Neutral Electric Aluminum Melting and Holding Furnace

Electric heater used for aluminum melting and holding furnace.

Instead of a gas burner, we use an electric heater for the aluminum melting and holding furnace, making it suitable for carbon neutrality. Basic size: 2000mm x 2000mm x 1800mm maximum (size can be changed) Melting capacity up to 500kg Temperature accuracy plus or minus 5.0℃ It can be miniaturized and space-saving. There is, of course, no CO2 from gas burner combustion. We have a catalog available, although it is simple.

Company：サイアムサンコータイ支店
Price：1 million yen-5 million yen

Electric furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Atmosphere furnace: Heat treatment with gas adjustment of the atmosphere inside the industrial furnace is possible.

With an "atmosphere furnace" that performs heat treatment using atmosphere gases tailored to the properties of the materials, oxidation, decarburization, and improvements in material properties, as well as post-processing steps, can be carried out smoothly.

When steel undergoes heat treatment in the atmosphere, oxidation and decarburization can occur, which may necessitate surface finishing and other processing. Therefore, atmosphere furnaces are often used to fill the furnace with atmosphere gases to reduce post-processing efforts or to suppress oxidation and decarburization, depending on the application. The atmosphere gases used can vary widely based on the properties of the material and the purpose of the heat treatment, including inert gases such as nitrogen and argon, as well as hydrogen and AX gas. 【Features】 ● Gas switching is possible during heat treatment. ● There are various types of furnaces available, including batch and continuous types. ● We handle degreasing furnaces for powder metallurgy. 【Case Studies】 ■ Want to anneal aluminum without oxidation → 'Roller Hearth Annealing Furnace' ■ Want to carburize the material → 'Batch Atmosphere Gas Carburizing Furnace' ■ Want to nitrify powders → 'Retort Rotary Nitriding Furnace' If you have any new challenges or inquiries regarding energy conservation, automation, environmental considerations, or safety, please feel free to reach out.

Company：サンファーネス
Price：Other

Industrial Furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Furnace and sintering furnace capable of heat treatment of metals and ceramics.

The "sintering furnace" can mass-produce high-precision parts and is used in the manufacturing of various mechanical components, including automotive parts.

The "sintering and firing furnace" is a furnace that imparts a specific shape and strength by placing powder into a mold, shaping it, and heating it to harden. It is mainly used in the production of ceramics and battery materials. The name changes depending on the material being hardened: oxide-based materials like ceramics are processed in a "firing furnace," while heat treatment of metal powders is done in a "sintering furnace." Types of metal powders include iron, copper, aluminum, titanium, lithium, and manganese. 【Features】 ● Customization options such as additional debinding and adjustment of the purity of the atmosphere gas are available. ● Preheating, heating, and cooling zones can be integrated into a single unit. ● Temperature and time can be freely adjusted according to the type of material and heating conditions. The "sintering and firing furnace" comes in batch and continuous types. 【Case Studies】 ■ To debind or protect the surface of powder in powder metallurgy from an oxidizing atmosphere → "Vacuum Sintering Furnace" ■ To adjust the gas purity in the furnace atmosphere → "Pusher Type Sintering Furnace" ■ To fire glass paste used on substrates → "Conveyor Type Glass Firing Furnace" ■ To mold difficult-to-sinter materials with high precision → "Hot Press Furnace"

Company：サンファーネス
Price：Other

Industrial Furnace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Furnace Product List and Ranking from 407 Manufacturers, Suppliers and Companies | IPROS GMS

Furnace Manufacturer, Suppliers and Company Rankings

Furnace Product ranking