Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.
541～555 item / All 2584 items
Band heater manufactured in response to the global need for energy conservation.
A band heater equipped with a thermal insulation layer made of rock wool or ceramic fiber on the outside, preventing unnecessary dissipation of thermal energy to the outside.
A rich lineup is available.
Heater for heating the nozzle part of the injection molding.
Used for air heating and contact heating.
A heater with a wide range of applications using industrial heating elements.
Completely waterproof and suitable for outdoor use! Perfect for cafes and restaurants. Enjoy comfort on the terrace!
We offer the 'Chrester Infrared Heater,' which is completely waterproof (IP65) and suitable for outdoor use. We have three series: the "Pegasus Series," ideal for localized heating in theme parks and event venues; the "Titan Series," perfect for outdoor waiting areas such as parking lots and takeout food pickups; and the compact and lightweight "Fairy Series." Additionally, we provide wall and ceiling-mounted models, as well as stand-mounted models that can be installed horizontally or vertically for each series. 【Features】 ■ Completely waterproof (IP65) ■ Suitable for outdoor use ■ Usable with 100V outlets ■ Beautiful and elegant design *For more details, please refer to the materials. Feel free to contact us with any inquiries.
A surface heating element from another dimension! We have realized a futuristic fabric device.
"HOTOPIA" is a fabric heater, a "fabric heater-type wearable unit" where each individual thread generates heat independently. Thanks to the properties of the fabric, such as stretch, bending, and shear resistance, it is less affected by intense movements or the stress of washing, providing safe and uniform heating. Additionally, it stretches approximately 100% (twice) in both vertical and horizontal directions. 【Features】 ■ Can be sewn with a sewing machine ■ Excellent durability ■ Healthy warmth ■ Hygienic management ■ High antibacterial power of 99.9% *For more details, please download the PDF or contact us.
This is a anti-pin hole immersion sheath heater with a 100% PFA coating on the heating element.
The USL-PFA coated immersion heater S-type/J-type is a coated immersion heater designed for chemical applications, featuring weather resistance, heat resistance, and chemical resistance. It has a fluororesin coating made of Teflon (R)/PFA･PTFE and is an anti-pinhole immersion sheath heater. 【Features】 ○ Ideal for heating and maintaining the temperature of acidic and alkaline liquids and other chemicals ○ Does not contaminate fluids as it does not mix with dissimilar metals ○ Difficult to adhere, and if it does stick, it can be easily removed ○ Excellent durability, economical, and versatile heater For more details, please contact us or download the catalog.
A wiring pattern is formed on the film, and it functions as a heater by allowing current to flow. We are capable of contract manufacturing wiring molding technology!
By flowing current through a wiring pattern created by combining laminate technology and disconnection detection technology, it can function as a heater. ■ Wiring Pattern Technology Since it is possible to construct highly flexible wiring patterns, optimal wiring patterns can be applied to areas that require high light transmittance, achieving anti-fogging and defrosting functions. (No need for pattern masks, printing plates, etc., as wiring can be formed based on CAD data.) ■ Environmental Considerations Compared to planar heaters using etching, the use of metal wires with a constant diameter results in less variation in characteristic impedance, and it is also environmentally friendly due to less waste liquid and waste material. ■ Selectable Conductors Conductors can be selected according to performance, with diameters ranging from 0.05 to 0.12 mm. Wire materials available include copper, nichrome (NiCr), kanthal (FeCrAl), tungsten, and others. 【Our company offers contract manufacturing of wiring formation technology】 Wiring patterns can also be formed using screen printing. Please feel free to contact us. *Our website's "What is a Film Heater?" is a popular recommended content. Please take a look!
Introducing a panel heater that can be cleaned due to the non-stick properties of PTFE, suitable for heating corrosive solutions!
"Heat Front" is a panel heater completely coated with a fluororesin (PTFE) that has excellent chemical resistance. Since the heating element is fully embedded within the fluororesin, there is no concern about corrosion. Additionally, the power cord is also completely coated with fluororesin, allowing for safe use in any corrosive environment. Furthermore, the non-stick properties of PTFE allow for easy cleaning, and the robust design achieved through integrated molding is also a feature. [Features] ■ Developed by Norton Pampas ■ Excellent chemical resistance ■ Robust design through integrated molding (PTFE thickness of 2mm or more) ■ Easy to clean due to the non-stick properties of PTFE ■ Prevents the adhesion of scale, which significantly reduces thermal conductivity ■ The connection between the heating element and the lead wires is embedded within the panel, eliminating concerns about short circuits *For more details, please refer to the PDF document or feel free to contact us.
A rich lineup tailored to your needs. Please feel free to contact us.
This is a mantle heater that can be used for beakers, funnels, Petri dishes, etc. We offer a variety of types according to your needs. 【Types】 ■ Type B for beakers (total of 11 types) ■ Type VL for separating funnels (total of 8 types) ■ Type V for funnels (total of 9 types) ■ Type BF for Buchner funnels (total of 9 types) ■ Type MA for mat type (total of 8 types) ■ Type FN for flexible (total of 12 types) *For more details, please download the catalog or contact us.
Semiconductor heater
We use a thin heater, which allows us to manufacture heater plates that are thinner and lighter than those made with cast heaters. We can also design the heater output freely, so we can accommodate your desired heater output in our designs.
A heat shrink tube heater that can be reliably shrunk in just a few seconds with one touch.
The tube heater ITH-15S is a heat shrink tube heater that can reliably shrink in just a few seconds with a single touch, compared to traditional manual drying methods. It is equipped with two 500W near-infrared heaters, allowing you to freely adjust the temperature (heating time) according to the object being heated. For more details, please download the catalog.
A fluororesin heater that is "gentle on liquids" with technology that cherishes liquid solutions. It has a proven track record of chemical resistance, durability, and high-temperature use (up to 90°C).
Our technology's "Slow Warm Design" suppresses thermal damage to the liquid during heating. The Slow Warm Design does not mean that the temperature rise is slow; rather, it is designed to ensure that the surface temperature distribution of the heater is uniform, allowing the entire solution to be heated evenly. With a 1mm fluoropolymer (PFA) coating and IPX8 (JIS waterproof protection grade 8), it offers chemical resistance and durability from strong acids to alkalis, and can handle liquid temperatures up to 90°C. Both the heater and the power cable are made entirely of fluoropolymer.
A fluororesin heater that is "gentle on liquids" with technology that values the liquid. It has a proven track record of chemical resistance and durability, with many models available for high-temperature use.
Our technology's "Slow Warm Design" helps to suppress thermal damage to liquids during heating. The Slow Warm Design does not mean that the temperature rise is slow; rather, it is designed to ensure that the surface temperature distribution of the heater is uniform, allowing the entire liquid to be heated evenly. Each model comes with a one-year waterproof guarantee due to its specific submersible and waterproof specifications. It has chemical resistance and durability from strong acids to alkalis. Heat Furon can withstand high temperatures up to 95°C, while UU Furon can handle temperatures up to 90°C.
A submersible liquid heating heater that achieves high durability and safety through its unique waterproof integrated structure and safe electric heating design.
Taniguchi Heaters obtained a patent for the quartz immersion heater as the first liquid heating heater in 1947. Since then, it has undergone numerous improvements, obtaining patents for both non-drip and drip-proof designs, as well as a capless waterproof system. The cap-side type, which does not interfere with the carrier (transport device), has also been made waterproof, and the company has received international safety standard CE (safety) mark certification and IPX8 (JIS waterproof protection grade 8). It comes with a one-year waterproof guarantee.
A heating heater for the liquid used in the tank, inserted from the side of the tank. The side-insert heater is our company's name, and the general term is "screw-in (plug) / flange heater."
The "side-insert heater" used in metal tanks (including those with resin lining) is based on a straight pipe style that is less prone to liquid adhesion compared to traditional U-tube models. There are three types of outer pipe materials: the model with a stainless steel outer pipe has a SUS316 surface polished to 400 mesh for weak alkaline to water applications; the model with a Teflon (4,6-fluorinated) outer pipe features a fluororesin strongly coated for certain strong acids to weak acids and water applications; and the titanium outer pipe is made according to JIS TTP340, suitable for seawater, weak alkaline, and certain weak acid applications. All of these have the characteristic of delaying the occurrence of scale (liquid adhesion). This series is designed for heaters that are inserted from the side of the tank, and there are two types for installation: one that directly attaches the heater to a flat wall surface and another that attaches the heater to a short pipe protruding from the wall. Therefore, the installation methods are classified into direct attachment and short pipe attachment, and based on the form of the attachment, there are "screw-in type" and "flange type."
