Heater Product List and Ranking from 472 Manufacturers, Suppliers and Companies

Round heater in both large and small sizes

Even temperature rise without unevenness! Corresponds to the areas you want to heat in a circular shape. It can be arranged to heat in the desired shape. Usable both outdoors and indoors, and can be set to the appropriate temperature according to the situation!

This product is a heater that can accommodate all sizes. It achieves uniform temperature rise without temperature variations. It can be used to heat any circular area, regardless of whether it is for a toilet seat heater. Please feel free to consult us when you need assistance. 【Features】 ■ Instant response ■ Energy-saving ■ Uniform temperature rise ■ Compatible with circular shapes regardless of toilet seat ■ Custom sizes and applications available ■ Temperature settings adaptable for both outdoor and indoor situations ■ Switchable options *For more details, please refer to the PDF document or feel free to contact us.

Company：メイジ
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Solar panel heater

Equipped with a fully heating film heater! A structure that heats the frame when it becomes cold and allows for drainage from the bottom.

We would like to introduce our "Solar Panel Heater." A film heater is attached to the inner surface of an L-shaped Galvalume steel plate (t0.35), and it is bonded with outdoor double-sided tape that also serves as insulation to the frame at the bottom of the PV. The surface of the panel is covered with waterproof tape to fill in any gaps. Please feel free to contact us if you would like to place an order. 【Features】 ■ Heats the frame when it becomes cold ■ Structure allows for drainage at the bottom *For more details, please refer to the PDF document or feel free to contact us.

Company：メイジ
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Panel-type far infrared heater "Infrared ST type"

Magnetized ceramic heater born from years of experience!

The "Infrared ST Type" is a panel-type far infrared heater that achieves high emissivity far infrared radiation through magnetic ceramics. The ceramic parts on the back of the heater block excess heat. Please feel free to contact us if you have any inquiries. 【Applicable Industries】 ■ Electronics Industry ■ Plastics Industry ■ Coating Industry ■ Food Industry *For more details, please download the PDF or contact us.

Company：ササキテック
Price：Other

Ceramic Heater
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Characteristics of far infrared rays

Efficient direct heating through radiative heat transfer with wavelengths from 3μm to 1000μm.

Far infrared rays have the characteristic of directly heating objects by utilizing radiative heat transfer. Infrared rays are a type of electromagnetic wave, like radio waves and visible light, and are invisible electromagnetic waves with longer wavelengths than visible light. The range of infrared wavelengths is from 0.8μm to 1,000μm, and the range with wavelengths longer than 3μm is called far infrared. Heating of objects by far infrared means that the absorption of far infrared rays causes the molecules that make up the object to vibrate. Many objects around us (such as polymers like plastics, rubber, paints, fibers, and food) have absorption bands in the wavelength range of 2.5μm to 30μm, allowing far infrared to efficiently heat them. 【Characteristics of Far Infrared】 ■ Efficient heating through direct heating ■ Increased productivity by reducing heating time ■ Uniform heating of the entire object, preventing uneven heating due to color variations, thus enhancing the quality of the heated items ■ High controllability, allowing for precise distribution in flat areas, variations in height, and time accuracy ■ No exhaust gases, dust, or dirt generated, making it a clean and safe heating source *For more details, please refer to the related links or feel free to contact us.

Company：ササキテック
Price：Other

Heating device
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Titanium CH-type heater

Adopts a titanium case with excellent corrosion resistance!

We would like to introduce our "Titanium CH Type Heater." We have adopted a titanium case with excellent corrosion resistance for the CH type, which is suitable for clean rooms. It is ideal for heating processes in environments where stainless steel is prone to corrosion. We can provide sizes identical to the conventional CH type. 【Dimensions (mm)】 ■100×400 ■200×400 ■300×400 *For more details, please refer to the related links or feel free to contact us.

Company：ササキテック
Price：Other

Heating device
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Panel-type infrared heater "Infrared ST type"

A ceramic heater created from years of experience! Achieving high emissivity far-infrared radiation.

We would like to introduce our panel-type infrared heater, the "Infrared ST Model." Made from porcelain ceramic, it achieves high emissivity far infrared radiation. The ceramic parts on the back of the heater block excess heat. Please feel free to contact us if you have any inquiries. 【Dimensions】 ■100×400 ■200×400 ■300×400 We also accommodate custom sizes and custom mounting brackets, so please consult with us. *For more details, please refer to the related links or feel free to contact us.

Company：ササキテック
Price：Other

Heating device
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Panel-type far-infrared heater "Infrared CH type/ST type"

Years of proven results! Ideal for drying processes in precision equipment manufacturing and coating.

We would like to introduce our panel-type far-infrared heaters, "Infrared CH Type/ST Type." The "Infrared CH Type" features a special ceramic surface treatment that ensures complete dust-free operation even at high temperatures. It has no heater junction frame, achieving uniform temperature distribution. The "Infrared ST Type" utilizes porcelainized ceramic, enabling high emissivity far-infrared radiation. The ceramic parts on the back of the heater block excess waste heat. *For more details, please refer to the related links or feel free to contact us.*

Company：ササキテック
Price：Other

Heating device
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

About halogen heaters

Evaporation, condensation, movement, and decomposition of the halogen cycle! Introducing our "Halogen Heater."

We would like to introduce the "Halogen Heater" that we handle. The heater structure consists of a light-emitting tube, filament, holding ring, base, sealing part, and lead wires. It operates on the principle of thermal radiation generated by Joule heating when current flows through the conductor. Please feel free to consult us when you need assistance. 【Halogen Cycle】 ■ Evaporation - When lit, the temperature of the filament rises, causing tungsten to evaporate. ■ Condensation - Tungsten molecules condense with halogen molecules near the inner wall of the quartz tube. ■ Movement - The bonded molecules move towards the filament due to convection. ■ Decomposition - When the temperature near the high-temperature filament exceeds 1,400°C, they separate into halogen and tungsten. The tungsten returns to the filament, and the freed halogen molecules float and repeat the reaction of condensing with tungsten molecules near the inner wall of the quartz tube. *For more details, please refer to the PDF document or feel free to contact us.

Company：ヒメジ理化
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heater manufacturing examples

We manufacture various types of halogen heaters and cantal heaters! Here are examples of our heater production.

We would like to introduce our heater manufacturing examples. In addition to "halogen heaters" such as straight tube type, 3D type, ring type, half-circle type, and spiral type, we also manufacture "cantal heaters" in L-shaped type, spiral type, and flat type. Please feel free to consult us when you need assistance. 【Overview of Examples】 ■ Manufactured Products - Halogen Heaters: Straight Tube Type, 3D Type, Ring Type, Half-Circle Type, Spiral Type - Cantal Heaters: L-Shaped Type, Spiral Type, Flat Type *For more details, please refer to the PDF document or feel free to contact us.

Company：ヒメジ理化
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-crusher

A device that automatically processes crushing and discharge!

The "Multi Crusher" is a device that automatically processes the crushing and discharging of materials supplied to five high-speed mills located on a rotating table via a hopper and conveyor belt. By utilizing the advantages of high-speed mills and employing multiple units, it achieves processing capabilities comparable to mass production machines. Additionally, it features a mechanism that allows for easy attachment and detachment of cutters and containers, making post-operation cleaning simple. Please feel free to contact us if you have any inquiries. 【Basic Specifications (excerpt)】 ■ Power Supply: 3-phase 200V (50/60Hz) ■ Drive Motor Capacity: 1.5kw x 5 units ■ Crusher Rotation Speed: 10,000rpm ■ Number of Crushers: 5 units ■ Processing Capacity (specific gravity 1): When using 5 units (max. 100kg/hr.) *For more details, please download the PDF or contact us.

Company：思考館
Price：Other

Crusher
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Kiln furnace

Drying and sterilization can be performed while stirring! An alarm will sound when the drying progresses and the product temperature reaches the set temperature.

The device is designed to dry and sterilize food ingredients by mixing them while injecting superheated steam gas into the chamber. Ingredients are fed into the device by opening the upper hatch and using a screw conveyor or other transport mechanism. After processing, the discharge is done by opening the front hatch, and the mixing blades are rotated in the forward direction to allow the materials to exit from the discharge port to the shooter. The exhaust containing airborne powder is separated into gas and powder using a cyclone, with only the gas passing through the blower and being released into the atmosphere. 【Basic Specifications (Partial)】 ■ Power Supply: 3-phase 200V (50/60Hz) ■ Drive Motor Capacity: Gear motor 0.2–1.0 kW (for mixing) + 0.4 kW for the induction blower ■ Operating Temperature (inside the chamber): 350℃–500℃ * Exhaust gas temperature from the superheated steam device ■ Chamber Volume: 0.3–1.0 m³ * Maximum input amount is approximately 1/3 of the volume ■ External Dimensions: L800×W1672×H1602–L1340×W2377×H1935 (mm) * For more details, please refer to the PDF document or feel free to contact us.

Company：思考館
Price：Other

Mixer/agitator
Drying Equipment
Other physicochemical equipment
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gas separation type surface heating heater 'HFC-Ox'

A surface heater with excellent uniform heating properties!

The "HFC-Ox" is a gas separation type surface heating heater that uses C/C composites (carbon-carbon composites) completely covered with quartz glass, capable of heating up to 1,000°C in an oxidizing atmosphere. It is mainly suitable for integration into thin film devices (such as CVD/sputtering) and semiconductor manufacturing equipment (such as substrate heating/flash annealing). 【Features】 ■ Capable of heating up to 1,000°C in air or oxidizing atmosphere ■ Designed with chemically stable quartz glass, making it less susceptible to environmental influences ■ Extremely low contamination generation, allowing for clean operation ■ The C/C composite material used for the heater has a small heat capacity, is resistant to vibration, shock, and thermal shock, and allows for rapid heating and cooling ■ Compact design that does not take up much space *For more details, please download the PDF or feel free to contact us.

Company：ナガノ
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface Heating CC Heater

For incorporation into thin film devices and semiconductor manufacturing equipment! Surface heaters capable of heating to over 1200°C.

The "Surface Heating CC Heater" is a thin and compact product that uses C/C composite (carbon-carbon composite) as its heat source. By using C/C composite, it is possible to achieve high temperatures that are difficult to reach with plate heaters using sheath heaters. Additionally, since heating is performed on a susceptor installed above the heater, uniform heating can be achieved, allowing for temperature increases of up to 400°C in the atmosphere and over 1200°C in a vacuum or inert gas environment. 【Features】 ■ Uniform heating with a susceptor ■ Realization of high-temperature heating ■ Advantages of using C/C composite material *For more details, please refer to the PDF document or feel free to contact us.

Company：ナガノ
Price：Other

Ceramic Heater
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-temperature sheath heater

Heater wire capable of reaching temperatures up to 900℃! Flexible processing is possible.

The "high-temperature sheath heater" is a product that has a metal protective sheath covering an electric heating wire. Since the heating wire is insulated by the protective sheath, it can be used as a heat source for various applications. In addition to bending processing, we also directly wrap it around conductive containers and heated objects. Please feel free to consult us regarding shapes, dimensions, etc. 【Features】 ■ Flexible bending processing ■ Direct wrapping around heated objects ■ Terminal processing for specific applications *For more details, please refer to the PDF materials or feel free to contact us.

Company：ナガノ
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sheath heater with cold end

Prevention of troubles due to high temperatures at terminal connections! A sheath heater that does not cause heat generation at the connection part.

The "Sheath Heater with Cold Ends" is a product among the sheath heaters we handle, featuring non-heating low-temperature lead-out sections (cold ends) at both ends of the heating element. It can achieve temperature increases up to 900°C, similar to regular high-temperature sheath heaters, while both ends remain relatively low in temperature, reducing issues at the terminal connection points where components are connected. Additionally, the lengths of the heating and non-heating sections can be specified as desired. 【Features】 ■ Ends at 50°C or below ■ Can be processed similarly to high-temperature sheath heaters *For more details, please refer to the PDF document or feel free to contact us.

Company：ナガノ
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Furnace heater reinforced with carbon fiber 【*Material samples available】

If you are concerned about the durability and temperature unevenness of in-furnace heaters, please consult us. We offer a balance of machinability like graphite and high thermal shock resistance and impact resistance.

Kureha Trading has started handling the "C/C Composite Heater," a furnace heater made from a carbon matrix reinforced with carbon fibers. The "C/C Composite Heater" possesses characteristics derived from carbon fibers, such as high strength and heating/cooling properties, while also achieving processability similar to graphite heaters. It can be designed and processed to match the shape and resistance values of the furnace. 【Recommended for those with the following concerns】 ◎ Experiencing issues with temperature unevenness and brittleness due to heater shape and material ◎ Unable to find alternatives due to manufacturer consolidation or discontinuation ◎ Heaters getting damaged from impact during installation ◎ Wanting to reduce heating and cooling times *This product is in development. For more details, please refer to the materials available for download in the catalog. If you would like a material sample, please feel free to contact us.

Company：クレハトレーディング
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seed heater

A rod heater that can be bent into various shapes to suit your needs!

The "sheath heater" is a rod-shaped heater that encloses a spiral-wound heating wire (nichrome wire) within a metal pipe, insulated with magnesia powder. Power terminals (M5 bolts) extend from both ends, allowing for a bendable structure. It can be bent into shapes that match the heating target. Primarily, it is used as a heat source for dryers and electric furnaces for air heating, but it can also be used for heating liquids (water, oil, chemical solutions, etc.). 【Features】 ■ The spiral-wound heating wire (nichrome wire) is enclosed in a metal pipe and insulated with magnesia powder. ■ Power terminals (M5 bolts) extend from both ends. ■ It can be bent into shapes that match the heating target. ■ It can be widely utilized in various shapes according to application needs. *For more details, please refer to the PDF document or feel free to contact us.

Company：プロヒートヒーター事業部
Price：Other

Other heaters
Heating device
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Band heater

The maximum operating temperature is 350°C! A cylindrical heater that can be bent to match the shape of the target object.

The "band heater" is a cylindrical heater made by bending a plate heater into a cylindrical shape, which can be mounted using a stainless steel band on the outside. Basically, it comes in 1P or 2P types, but larger diameters may have 3P types or more. Like plate heaters, it is also possible to perform hole processing or notching in advance. Additionally, shapes such as oval, barrel, or polygon can be manufactured to match the heating target. 【Features】 ■ Can be mounted using a stainless steel band on the outside ■ Like plate heaters, it is possible to perform hole processing or notching in advance ■ Shapes such as oval, barrel, or polygon can be manufactured to match the heating target ■ The 1P type is formed from a single heater into a circular shape ■ The 2P type is formed from two heaters, and the opening can be accessed by removing the tightening band *For more details, please refer to the PDF document or feel free to contact us.

Company：プロヒートヒーター事業部
Price：Other

Other heaters
Heating device
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Φ30～ Nozzle heater for heating molding machines, piping, syringes, etc.

The heating and insulation of cylindrical objects are designed with protrusions minimized to avoid interference with the surrounding area! Sealed types can also be manufactured.

The "Nozzle Heater" we handle is a compact version of a band heater, processed into a small-diameter cylindrical shape from a plate heater. It is a cylindrical heater specifically designed for nozzle heating in injection molding machines and extrusion machines, with the outer circumference designed to minimize protrusions to avoid interference with the surroundings. The power supply is lead wire type, which keeps the wiring neat. We also manufacture models with lead wire exit covers and sealed types as measures against resin leakage. Please feel free to contact us when you need assistance. 【Features】 ■ A compact version of a band heater processed into a small-diameter cylindrical shape from a plate heater ■ Specifically designed for nozzle heating in injection molding machines and extrusion machines ■ The lead wire type power supply keeps the wiring neat ■ Models with lead wire exit covers and sealed types are available as measures against resin leakage ■ Short delivery items (limited to standard/long) *For more details, please refer to the PDF materials or feel free to contact us.

Company：プロヒートヒーター事業部
Price：Less than 10,000 yen

Other heaters
Heating device
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Silicone rubber heater

The power supply voltage is 100V/200V/220V/240V! It can be manufactured in various shapes such as convex and concave.

We would like to introduce the "Silicone Rubber Heater" handled by Proheat. This is a flexible, lightweight, thin sheet heater that is insulated by sandwiching a heating element reinforced with glass cloth between silicone rubber sheets. It can be manufactured in various shapes, such as convex, concave, or donut shapes, to match the heating target. Due to the properties of silicone rubber, its use is limited to around 200°C (heater temperature), so it is mainly used for maintaining the temperature of containers or syringes filled with liquids, preventing condensation, and preventing freezing. 【Features】 ■ Insulated by sandwiching a heating element reinforced with glass cloth between silicone rubber sheets ■ Flexible and lightweight thin sheet heater ■ Can be manufactured in various shapes to match the heating target, including donut shapes ■ Made of silicone rubber, making it suitable for use in drip-proof environments *For more details, please refer to the PDF document or feel free to contact us.

Company：プロヒートヒーター事業部
Price：10,000 yen-100,000 yen

Other heaters
Heating device
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plate heater (space heater)

Supports the production of various shapes! An industrial heater with good adhesion to the heating element, enabling efficient heat conduction.

The "Plate Heater (Space Heater)" is a heater used for heating metal flat surfaces such as molds and heat plates. If it is flat, it can be manufactured in various shapes such as donut-shaped, polygonal, or with holes, depending on the usage situation. Through the pursuit of improvements in the manufacturing process and materials used, it has become a high-quality product. 【Features】 ■ Supports the production of various shapes ■ High thermal efficiency ■ Design tailored to applications ■ High quality ■ Choice of materials (corrosion-resistant stainless steel or thermally efficient bonded steel plate) *For more details, please refer to the PDF document or feel free to contact us.

Company：平和電機
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Liquid heating plug heater/casting heater

Introducing the "plug heater" that allows direct heating of water and oil, and the "cast heater" with a robust structure!

We would like to introduce the industrial heaters we handle. The "plug heater for liquid heating" is a versatile, generalized heater that can be used simply by screwing it directly into a pipe socket provided on the tank to be heated. It is manufactured and standardized for both water and oil with appropriate watt densities. The "cast-in heater" is a heater that integrates a sheath heater cast in aluminum or brass, allowing for a higher watt density than standard band heaters or plate heaters. 【Features】 ■ Plug heater for liquid heating - Direct heating of water and oil is possible - Easy-to-install plug structure ■ Cast-in heater - Supports high watt density - Excellent impact and vibration resistance *For more details, please refer to the PDF document or feel free to contact us.

Company：平和電機
Price：Other

Other heaters
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric heater "F Heater"

Compared to other electric heaters, it does not overheat, making it safe and energy-efficient.

The "F Heater" is a self-temperature-controlled electric heater that can adjust its power consumption according to the surrounding environmental temperature. This product has been developed utilizing the extensive technology and experience in conductive polymers cultivated through years of cable manufacturing. Please feel free to contact us if you have any inquiries. 【Main Features】 ■ Excellent safety and energy efficiency due to self-temperature control ■ Usable at any desired length ■ Easy installation ■ Maintenance-free ■ Can be overlapped ■ Highly durable *For more details, please download the PDF or feel free to contact us.

Company：エイ・ケー・ケー
Price：Other

Other heaters
Heating device
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Immersion-type steam ceramic heater

It can be heated with a thermal load density three times that of an electric heater with a surface temperature of approximately 1000°C.

We offer a "Submersible Steam Ceramic Heater" that enables steam heating of liquids, which was not possible with conventional metals, by using a ceramic outer tube (liquid-contact part) for the heater body. The heater's outer tube is made of silicon carbide (SiC) ceramic. Due to its excellent acid and corrosion resistance, it can be used with liquids that are difficult to heat with metal heating tubes, such as hydrochloric acid and chromic acid. Please feel free to contact us if you have any inquiries. 【Features】 ■ High efficiency due to high thermal conductivity ■ Can be used with any type of heating liquid ■ Releases a large amount of heat at low temperatures *For more details, please download the PDF or feel free to contact us.

Company：渡辺熱理興業
Price：Other

Ceramic Heater
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Semiconductor Electric Floor Heating Heater "Piasthermo"

Self-temperature control function (PTC) with a thickness of 0.6mm. Achieved a PTC ratio of over 1000 times.

"Pierathermo" is a semiconductor electric floor heating heater compatible with solid wood, tiles, Japanese-style rooms, marble, bathrooms, mortar embedding, and rock baths. Thanks to the semiconductor material (self-temperature control function, PTC), it prevents abnormal high temperatures caused by trapped heat and does not cause floor burns or fire accidents due to overheating. Additionally, unlike non-PTC type heaters, this extremely energy-efficient floor heating system continues to reduce power consumption as the temperature rises. Please feel free to contact us if you have any inquiries. 【Benefits】 ■ 10-year durability guarantee (warranty certificate issued) ■ Ensures semi-permanent "long life" ■ High safety standards ■ Low running costs, very economical ■ Fast heating speed for quick floor warming *For more details, please download the PDF or feel free to contact us.

Company：アトレック
Price：Other

others
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shipping in as little as 5 days after order! 'Silicone Rubber Heater' *Case study collection provided.

Order custom heaters from just one piece! We will design them to fit the shape of the object to be heated!

The "Silicone Rubber Heater" we handle is a thin sheet with a standard thickness of 1.5mm, which excels in thermal responsiveness. It fits curved surfaces such as cylindrical and conical shapes, as well as flat surfaces, allowing for efficient heat conduction to the target object. The heating element uses nickel-chromium alloy resistors and etched elements, ensuring stable heat generation. For flat shapes, we can design various special shapes such as circular, perforated, and irregular shapes to match the form of the target object. 【Features】 ■ Flexible material ■ The silicone rubber used is heat-resistant and electrically insulating ■ High-quality, high-performance heaters can be produced from a single unit ■ Designed for desired voltages from low voltage up to 240V ■ SR type: continuous use heat resistance temperature of 200℃, HT type: continuous use heat resistance temperature of 260℃ <Custom Silicone Rubber Heater (Order Made 5)> - You can select optional accessories for the heater in your desired size. - Shipment can be made as early as the 5th day after order placement. * There are limitations and selectable ranges for heater size, electrical capacity, and optional accessories. For more details, please refer to the PDF document or feel free to contact us.

Company：T&Gヒーター本社・工場
Price：Other

Silicon Heater
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Silicone rubber heater (custom-made 5)

Shipping within 5 days after order confirmation! You can select accessory options for the heater in your desired size.

We would like to introduce our "Silicone Rubber Heater (Custom Made 5)." It is possible to ship as early as the 5th day after your order. You can choose accessory options for the heater in your desired size. We offer a variety of options, including "with double-sided tape," "with K-type thermocouple," and "with fixed temperature thermostat." Please feel free to consult with us. 【Features】 ■ Possible to ship as early as the 5th day after your order ■ Choose accessory options for the heater in your desired size ■ For 100V: 10W to 2000W, but power density must be below 0.8W/cm2 ■ For 200V: 20W to 3200W, but power density must be below 0.8W/cm2 ■ Silicone lead wire lengths: choose from 300mm, 500mm, or 1000mm (same unit price) *For more details, please refer to the PDF document or feel free to contact us.

Company：T&Gヒーター本社・工場
Price：Other

Silicon Heater
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Can Heater (YGSN Type Standard Stock Item)

Safety design suitable for PSE! Introducing a heater designed to be simple and compact.

The "Can Heater (YGSN Type Standard Stock Item)" is a spring-fixed type product that allows for easy attachment and detachment to the target container. We offer a wide range of products including "Drum Can Heaters," "Pail Can Heaters," "One-Pound Can Heaters," and "4L Square Can Heaters." It features a safety design compliant with PSE standards and comes with a temperature controller. Please feel free to contact us when placing an order. 【Features】 ■ Easy attachment and detachment to the target container with spring fixation ■ Simple and compact design ■ Comes with a temperature controller ■ The YGSN-4L-Sq type includes a tightening adjuster, making it usable with two types of 4L cans ■ Custom sizes available *For more details, please refer to the PDF document or feel free to contact us.

Company：T&Gヒーター本社・工場
Price：Other

Silicon Heater
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Silicone rubber heater (custom product)

We offer a variety of options and accessories! We accept orders for custom-made heaters produced entirely on demand.

We handle "Silicone Rubber Heaters (Custom Products)." We offer various optional accessories and will propose appropriate specifications based on your usage purposes, conditions, and installation methods. We have a rich lineup including "Silicone Varnish Waterproof Type," "Etching Element Type," "Irregular R Processing Type," and "Can Heater YGSN Type (Custom Specification)." Please feel free to contact us. 【Partial Lineup】 ■ SR Type (Custom Specification) ■ HT Type (Custom Specification) ■ With Double-Sided Tape (100°C Heat Resistant, 200°C Heat Resistant) ■ With K Thermocouple *For more details, please refer to the PDF materials or feel free to contact us.

Company：T&Gヒーター本社・工場
Price：Other

Silicon Heater
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cylinder heater

Custom sizes are also available! Introducing a silicone rubber heater that is easy to attach and detach.

The "Cylinder Heater" is a product equipped with a silicone sponge for insulation. It comes with a temperature controller, but if advanced temperature control is needed, it can be replaced with a digital temperature controller separately. The heating lamp indicates at a glance that heating is in progress. You can choose based on cylinder size and operating voltage. Please feel free to contact us when you need assistance. 【Specifications Example (Excerpt)】 <Applicable Cylinder: 10L> ■ Rated Voltage: 100V/200V ■ Load Power: 450W ■ Heater Dimensions: 435mm × 400mm *For more details, please refer to the PDF document or feel free to contact us.

Company：T&Gヒーター本社・工場
Price：Other

Silicon Heater
Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heater Product List and Ranking from 472 Manufacturers, Suppliers and Companies | IPROS GMS

Heater Manufacturer, Suppliers and Company Rankings

Heater Product ranking