Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
331～345 item / All 815 items
It is made by inflating acrylic sheet material using free-blow molding. With free-blow molding, there is no mold contact, allowing for high transparency to be maintained.
The dome is shaped from highly transparent acrylic sheets. It was adopted because it has a good finish without mold contact compared to vacuum forming. However, since it is inflated freely, achieving precise accuracy becomes difficult.
Since CR40° does not have block material, it will be produced using compression molding. Shapes that are difficult to achieve with machining may be possible to produce with compression molding.
The 40° grade of neoprene rubber is synthesized from the material mixing. Compression molding requires the use of molds. In mass production, the product unit cost can be reduced through efficient mold forming.
HDPE is called high-density polyethylene and is distinguished from LDPE, low-density polyethylene. We will make proposals utilizing our company's know-how.
High-density polyethylene is also known as rigid polyethylene. It is a material that is rigid, impact-resistant, cold-resistant, water-resistant, and chemical-resistant, and it is inexpensive. Injection molding has good production efficiency and is suitable for mass production.
High-density polyethylene is widely used as an injection molding material. The base filter has many small holes and is manufactured through injection molding.
It is also called high-density, rigid polyethylene, which is a material that is rigid, impact-resistant, cold-resistant, water-resistant, and chemical-resistant, and is inexpensive. It serves as the base for the filter part of the filtration device. You can also rely on us for the non-woven fabric or sponge filters that will be layered on top.
Soft polyurethane does not wear out, allowing it to be used as a mock-up for a long time. We also produce many mock-ups and leisure goods through foam molding.
We will create molds of any shape and carry out the molding process. You can choose the hardness, whether or not there is a skin, coloring, and skin patterns. This is a familiar molding process, even for soft toy balls. We are open to consultations regarding mold making from actual items.
It is a thick meat formation, but managing shrinkage due to contraction becomes very difficult. Since we cannot allow distortion, we have implemented measures based on our unique know-how.
PP is one of the lightest plastics in terms of specific gravity, excels in thermoplasticity, and is a good material for molding and recycling. It is suitable for food sanitation laws and can also be used for applications that involve embedding in the human body. It has a good glossy appearance and is resistant to scratches. It also has excellent chemical resistance and water resistance, making it widely used in various fields such as Tupperware, washing machine drums, ventilation fans, battery cases, and syringes.
There is an integral skin material that forms a strong surface layer on polyurethane foam. It is produced using mold molding, where the polyurethane is foamed inside a mold.
Integral skin differs from regular polyurethane by forming a thick membrane, which is expected to enhance weather resistance and durability. It is also possible to control the color, hardness, and surface patterns. It is necessary to create molds or resin molds from a master model or by using 3D data.
It is dipping, where a mold is immersed in a PVC pool to shape it. Please make sure to use dip molding for the transparent caps.
It is also used for protecting the tips of lenses and similar items. Products for automotive harnesses and electrical materials often use translucent materials. It is compliant with RoHS2, so you can use it with confidence.
NBR95° has high hardness, making molding more difficult than with standard hardness. We have explored and experimented to find the optimal molding conditions for high-hardness rubber balls.
For high hardness of 95° in NBR, it must be ordered based on the material formulation. High hardness products often have issues with material flow within the mold, leading to many challenges. Since rubber balls are difficult to process through cutting, please consider molding them with a mold.
Reduction of assembly processes through integrated molding. Stable molding achieved with precision mold processing technology. Demonstrations will also be conducted at the exhibition.
The Sanshu Group conducts "LSR Packing Two-Color Molding," which reduces assembly processes through integrated injection molding of thermoplastic resin PC and thermosetting resin LSR. Utilizing precision mold processing technology that enables stable molding of silicone, we can provide high-quality and high-precision molded products. 【Features and Benefits of LSR Packing Two-Color Molding】 ■ Reduction of assembly processes through two-color molding ■ Integrated injection molding technology for thermosetting resin and thermoplastic resin ■ Precision mold processing technology that achieves stable molding of silicone ■ Capable of responding to requests from various fields such as electrical components, medical devices, and housing equipment *For more details, please refer to the materials. Feel free to contact us as well.
Unlike conventional bioplastics, this is a 100% plant-based and biodegradable bioplastic that does not contain petroleum-derived resins!
PlaX is a plant-based material that does not use any petroleum-derived resins and is biodegradable, allowing it to return to nature. The polylactic acid used in PlaX is weak against heat, brittle, and difficult to mold, but we have overturned that common understanding! 【Features of PlaX】 ■ 100% plant-based and biodegradable bioplastic ■ Achieves transparency and heat resistance ■ Improved flexibility and impact resistance ■ Can be molded using existing equipment 【When using PlaX for extruded sheet vacuum forming】 ■ Achieves transparency and high heat resistance ■ High low-temperature impact resistance, making it possible to replace PP ■ No concerns about environmental hormones due to being plant-based resin *Please download detailed materials or contact us for inquiries.
With a unique method, we can mold rigid PVC and super engineering plastics!
Both PVC and super engineering plastics are resins with excellent functionality, but there are not many factories involved in their molding. The reason for this is that the molding of both is highly challenging. At San-Etsu Industry, we can easily handle the molding of these materials using our unique methods. 【Features】 ■ PVC - Requires specialized molding machines due to gases generated during molding ■ Super Engineering Plastics - Plastic resin that can be used for long periods at temperatures above 150°C *For more details, please refer to the PDF document or feel free to contact us.
By handling rare engineering plastics in the industry, we can develop products with excellent functionality! Our high technical capabilities allow us to respond to various inquiries.
Our company proposes the selection of materials (raw materials) and molding methods based on a wealth of experience and accumulated knowledge. By consistently carrying out process design from mold development (in-house design and manufacturing) to molding processes and various secondary processing, we achieve speedy commercialization and respond to our customers' needs. Additionally, we have two factories in Hanoi and Bac Ninh, Vietnam, facilitating technical exchanges with our headquarters and enabling us to grow as a global company. By leveraging our overseas bases, we can offer competitively priced product proposals. We also have personnel with experience as judges and consultants, so please feel free to consult us if you encounter difficulties with system construction or operation. 【Features】 ■ Excellent molding technology ■ Realization of speedy commercialization ■ Utilization of overseas bases ■ Construction of an integrated management system *For more details, please refer to the related links or feel free to contact us.
Leave the metal injection molding (MIM) feedstock to us.
We select raw materials that match the product characteristics and manufacture "feedstock for Metal Injection Molding (MIM)." We own a series of manufacturing equipment, including injection molding machines, debinding furnaces, and sintering furnaces, allowing for a wide variety of prototype considerations. Additionally, we also accept inquiries regarding the mixing of powders and resins other than feedstock for MIM. 【Features】 ■ Selection of raw materials that match product characteristics ■ Selection of binders suitable for the debinding method ■ Particularly good shape retention during debinding (minimal debinding deformation) ■ Detailed support in line with the user's production process (injection moldability, debindability, target shrinkage rate, density, surface roughness, etc.) *For more details, please download the PDF or contact us.
