We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Processing Equipment.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Processing Equipment Product List and Ranking from 946 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.

Processing Equipment Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.

  1. エイブル Saitama//environment
  2. トリニティーラボ 中央事業所 Tokyo//Testing, Analysis and Measurement
  3. SINKPIA・JAPAN Kanagawa//environment
  4. 4 B7 Tokyo//software
  5. 5 スターエンジニアリング Ibaraki//Industrial Electrical Equipment
Go to Company Ranking

Processing Equipment Product ranking

Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.

  1. Cost and CO2 reduction through wastewater treatment - Exhibiting at FOOMA JAPAN 2026 エイブル
  2. Bite Feel Evaluation Measurement Device TL302 [*Free Demo Available*] トリニティーラボ 中央事業所
  3. "Bio Clean" - a bio-based food waste processor that does not require additional substrate. スターエンジニアリング
  4. 4 Alkaline neutralizing agent "Cement Buster" for drainage treatment at construction sites. 環境トータルシステム
  5. 5 Handheld Atmospheric Pressure Plasma Treatment Device "Piezo Brush PZ3"

Processing Equipment Product List

1711～1740 item / All 2830 items

Displayed results
Drain Water Treatment Device "DRAIN REMOVER"

Drain Water Treatment Device "DRAIN REMOVER"

【Use of Carbon-Based Activated Carbon】Compact and lightweight, easy to transport and install by one person! Adopts a natural drop method.

The "DRAIN REMOVER" is a drainage water treatment device that uses carbon-based activated carbon. It adopts a natural drop method, making the structure simple, and ensures that drainage water is treated into clear water through a two-stage adsorption process using special fibers and activated carbon. It removes oil contained in the drain and purifies the water to meet the discharge standard of the Water Pollution Control Law, which is an oil concentration of 5 ppm or less. 【Features】 ■ Compact and lightweight ■ Easy to transport and install by one person ■ Purifies water to an oil concentration of 5 ppm or less ■ Two-stage treatment structure that uses oil-absorbing fiber materials for floating and dispersed oil, and carbon-based materials for adsorbing emulsified trace oils *For more details, please refer to the PDF document or feel free to contact us.

  • Water treatment equipment
  • Other water treatment equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Safe and non-polluting "Polar Magnetic Water Treatment Device"

Safe and non-polluting "Polar Magnetic Water Treatment Device"

Norwegian magnetic water treatment device with an effective magnetic force of 6000 gauss.

The safe and eco-friendly "Polar Magnetic Water Treatment Device" is an optimal magnetic water treatment system for preventing the occurrence of scale, rust, and slime. Since the water passes directly through a powerful magnetic field, it is highly effective, treating the entire water supply by processing just a small portion of the main pipe flow. For more details, please download the catalog.

  • Water treatment equipment
  • Other water treatment equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TAB/COF manufacturing equipment

TAB/COF manufacturing equipment

It is possible to have a large effective pattern area, allowing for effective use of materials.

The "TAB・COF manufacturing device" can unwind product reels in sync with continuous transport without affecting the line transport. The tension controller maintains a constant rotation speed for the product unwind reel. The tension at the unwind section can vary depending on the product width, but for a width of 96mm, transport is possible at under 100g. Additionally, in the tact transport method, products are fed using nip rollers or a single-axis robot for chucking, and for handling fine items, positioning often employs an auto-alignment method using a camera. 【Features】 ■ Products can be continuously processed under the same conditions, flowing in units of several hundred meters at a constant speed. ■ Product quality, such as yield, is improved. ■ Continuous product flow eliminates the need for unnecessary transport fixtures. ■ It is possible to maximize the effective pattern area. ■ Effective use of materials becomes possible, which is particularly advantageous in terms of cost. *For more details, please refer to the PDF document or feel free to contact us.

  • Plating Equipment
  • Etching Equipment
  • Other semiconductor manufacturing equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Semiconductor printed circuit board horizontal manufacturing device for surface roughening and blackening treatment (surface treatment)

Semiconductor printed circuit board horizontal manufacturing device for surface roughening and blackening treatment (surface treatment)

Uniform processing without unevenness is possible! Compatible with processing chemicals from various chemical manufacturers.

Introducing the surface roughening and blackening treatment machine for surface treatment handled by Fujikiko Co., Ltd. Thanks to the optimal conveyor design and nozzle design, uniform processing without unevenness is possible. Additionally, the clean design of the drying device prevents dust adhesion and is compatible with processing chemicals from various chemical manufacturers. 【Features】 ■ Compatible with processing chemicals from various chemical manufacturers ■ Optimal conveyor design and nozzle design ■ Uniform processing without unevenness is possible ■ Clean design of the drying device prevents dust adhesion *For more details, please refer to the PDF document or feel free to contact us.

  • Other surface treatment equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chromatogram data processing device

Chromatogram data processing device

Chromatogram data processing device

**Overview** The world of personal computers and networks is rapidly evolving in terms of performance and price. Introducing the data processing device for chromatograms that can make the most of this evolution: "Chromato-PRO." Chromato-PRO converts analog voltage signals obtained from HPLC and GC detectors into digital signals using the USB-compatible data acquisition unit "Marina." By using the data import program "Rec-PRO," you can import the data into a personal computer, allowing for waveform processing and quantitative calculations of chromatograms. **Features** ● Easy to use with clear display ● Advanced waveform processing functions ● Report generation capabilities ● Overlay function for chromatograms ● User-friendly and easy-to-read data import software "Rec-PRO" ● Easy installation of the data acquisition unit "Marina" ★ Free demo rental ★ Even if you prefer a familiar data processing device, once you try our products, including "Chromato-PRO," you will understand its simplicity and convenience. Please feel free to contact us through the "Inquiry" section.

  • Other measurement, recording and measuring instruments
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Molecular weight and molecular weight distribution calculation processing device

Molecular weight and molecular weight distribution calculation processing device

Molecular weight and molecular weight distribution calculation processing device.

【Overview】 This is a calculation processing device for molecular weight and molecular weight distribution. The Chromato-PRO-GPC, which adds molecular weight and molecular weight distribution calculation functions through GPC (SEC) analysis to the user-friendly, high-performance, and low-cost Chromato-PRO, has been born. 【Features】 ● Docking window that achieves excellent operability ● Easy-to-understand calibration curve creation ● Clear display of processed results of chromatograms ● Reliable result confirmation through detailed display functions ● Printing output can be easily generated by selecting items ● Of course, data export to Excel is also easy ● Data copying function (via clipboard) *For more details, please contact us. ★ Free demo rental ★ Even for those who prefer familiar data processing devices, once you try our products, including "Chromato-PRO," you will understand its simplicity and convenience. Please feel free to contact us through the "Contact Us" section.

  • Other measurement, recording and measuring instruments
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
JOHNAN's drain processing device "DrenTore"

JOHNAN's drain processing device "DrenTore"

We offer a compact drainage treatment device that does not require power.

JOHNAN Corporation contributes to reducing environmental impact through its air compressor dedicated drain treatment device, "DrenTore." 【Features】 - No power supply required - Compact and simple structure - Easy installation without the need for construction 【Topics】 [Patent Obtained] No. 4064157 (Japan) [Award] 2009 "Kyoto Small and Medium Enterprises Excellent Technology Award" (Kyoto Industrial 21 Foundation) For more details, please contact us by phone or through our website, and we will provide a device suitable for your needs. https://www.johnan.com/drain-treatment/ 【Contact Information】 TEL: 0774-43-1486 Email: kankyo@johnan.com

  • Water treatment equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bonding processing equipment [Achieving automation of the line]

Bonding processing equipment [Achieving automation of the line]

Achieving line automation! A clean and low-noise bonding processing device using a rotary drum method.

The "Bonding Treatment Device (Lubrication Treatment Device for Cold Forging)" utilizes a rotary drum system, allowing for a continuous escalator transport method, thereby achieving automation of the line. The entire device is sealed, preventing the emission of gases and steam, making it clean, low-noise, and safe. In the treatment process, only the workpieces move during transport, resulting in a uniform and stable coating. 【Features】 ■ Automation of the line is possible ■ Sealed structure for cleanliness, low noise, and safety ■ Uniform surface treatment ■ Minimal use of chemicals, reducing running costs *For more details, please request documentation or view the PDF data available for download.

  • Other processing machines
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Information] Industrial Applications and Challenges of DLC Films

[Information] Industrial Applications and Challenges of DLC Films

Content on the combined technology of DLC film formation and WPC treatment is published!

This document is a technical material on the industrial applications and challenges of DLC films. It explains the overview and types of DLC, deposition methods, trouble factors and challenges, as well as structure and characteristics, hardness measurement, structure/density, adhesion properties, and bonding strength. DLC is increasingly used in a wide range of applications, including tools, moving parts, and medical devices. [Contents] ■ Introduction ■ What is DLC? ■ Characteristics of DLC ■ Industrial applications of DLC films and composite technology with WPC treatment ■ Conclusion *For more details, please download the PDF or feel free to contact us.

  • Other surface treatment equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
WPC processing <Powder adhesion suppression>

WPC processing <Powder adhesion suppression>

Improved powder flow, with 1.2 to 2.0 times the permeability! Reduces the hassle of maintenance and replacement due to clogging of the mesh.

"WPC processing" stands for Wide Peening Cleaning, which is a type of shot peening (impact method). It doubles the passability by improving slip properties, reduces clogging, and minimizes material loss. It suppresses adhesion and allows for easy cleaning with air. It forms uneven surfaces and reduces contact area. In other words, since it is not a coating, you can use it with confidence. 【Benefits】 ■ Increases productivity ■ Improves yield ■ Reduces cleaning time ■ Cuts labor and utility costs ■ Measures against foreign matter contamination *For more details, please download the PDF or feel free to contact us.

  • Other surface treatment equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plasma treatment device (multi-purpose plasma etcher)

Plasma treatment device (multi-purpose plasma etcher)

Plasma processing device (multi-purpose plasma etcher)

This device is a multipurpose single-sheet plasma unit that is effective for etching polyimide-based resins, nitride films, ashing (ash removal) of photoresists, and surface modification, using parallel plate high-frequency plasma. It supports wafer sizes from 50 to 200 mm (2 to 8 inches) and is compatible with BGA, CSP, and other formats. The plasma mode can be switched between DP mode and RIE mode via the operation panel. Additionally, it allows for the retrofitting of a transport unit, making it ideal for experimental and research facilities.

  • Etching Equipment
  • Ashing device
  • Other processing machines
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
8ch Analog Input Module ND-6017

8ch Analog Input Module ND-6017

8ch Analog Input Module ND-6017

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command and response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

  • converter
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
4ch Analog Input Module ND-6024

4ch Analog Input Module ND-6024

Analog Input Module ND-6024

ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command and response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.

  • converter
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air-driven liquid pump / Air-driven gas booster

Air-driven liquid pump / Air-driven gas booster

【Free demo units available!】 Air-driven liquid pumps and air-driven gas boosters.

This is an air-driven liquid pump and air-driven gas booster manufactured by Hydraulics International, which primarily produces hydraulic and gas pressure devices for aircraft and space equipment. 【Features】 - Easily generates high pressure using instrument air. - Allows for accurate pressure measurement through regulator adjustments. - No power supply is needed for pressure generation, making it usable in hazardous areas. - A wide range of products is available for specified pressure and flow rates. For liquids: 10.3 MPa to 620 MPa For gases: 0.34 MPa to 172 MPa ■□■□■□■□■□■□■□■□■□■□■□■□ ＝＝＝＝＝ Please contact us for more details＝＝＝＝＝

  • Other pumps
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Film cleaning machine (high-efficiency cleaning shower pipe method) "Clean Ace"

Film cleaning machine (high-efficiency cleaning shower pipe method) "Clean Ace"

Wash, rinse, and roll up both sides of the film all at once! Easy to extract and store as is!

"Clean Ace" is a washing machine that allows for the cleaning and rinsing of long sheets such as reflective films for fruit trees and agricultural plastics, enabling both sides of the film to be cleaned simultaneously and automatically rolled up. The brushes are arranged in a spiral pattern, washing the sheet while spreading it outward from the center. The shower pipe allows for increased water flow, effectively rinsing away dirt after brush cleaning. Additionally, the structure allows for the storage pipe for the sheet to be set onto the winding pipe, making it easy to remove the rolled-up sheet along with the storage pipe. 【Features】 ■ Simultaneous cleaning and rinsing of both sides of the film ■ Spiral arrangement of brushes for cleaning while spreading the sheet outward from the center ■ Adjustable water flow with the shower pipe ■ Easy removal of the rolled sheet along with the storage pipe *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shou Environmental Equipment Co., Ltd. Company Profile

Shou Environmental Equipment Co., Ltd. Company Profile

High-quality maintenance born from extensive achievements. We provide consistent services across a wide range of fields.

Shou Environmental Equipment Co., Ltd. has utilized its extensive experience and specialized technology in various fields to provide suitable systems for our customers. We have achieved significant results in the treatment of industrial wastewater from food factories, electronics and semiconductor factories, chemical plants, and domestic wastewater, contributing to the purification of the natural environment. In addition, we have developed tertiary treatment systems, not only for primary and secondary treatment, enabling water recycling and playing a part in the effective use of water resources. 【Business Content】 ■ Consulting, design, manufacturing, and maintenance of water supply facilities, wastewater treatment facilities, and cleaning equipment. *For more details, please refer to the PDF materials or feel free to contact us.

  • Ozone Generator
  • Gas Generator
  • Deaeration device
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrafine Bubble Diffusion Device "Elastox"

Ultrafine Bubble Diffusion Device "Elastox"

Extremely high oxygen transfer efficiency! A high-quality and stable performance ultra-fine bubble aeration device.

"Elastox" is a micro-bubble aeration device that can significantly reduce power consumption in wastewater treatment due to its extremely high micro-bubble aeration efficiency. It comes in three types: roll (cylindrical), teller (disk-shaped), and plate (flat). It can be installed in any aeration method, including full aeration, diagonal aeration combined with underwater mixers, and swirling flow aeration. The Elastox aeration device uses a rubber membrane, which resolves the major drawbacks of conventional aeration devices, such as susceptibility to clogging and high pressure loss. 【Features】 - Very high oxygen transfer efficiency - Excellent biological and chemical corrosion resistance - No clogging due to backflow, allowing for intermittent operation of the blower - Low pressure loss and minimal power loss - Easy installation and flexible placement For more details, please contact us or download the catalog.

  • Water treatment equipment
  • Aeration/air diffusion equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shaking Bed Bio Fringe

Shaking Bed Bio Fringe

Capable of high concentration and high load processing, contributing to space-saving.

The microbial layer retention of the fringe thread is extremely high, achieving capacity enhancement of existing equipment and sludge reduction, etc., through the oscillating bed bio-fringe.

  • Other consumables
  • Other polymer materials
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rotary disc water treatment system

Rotary disc water treatment system

Treating wastewater with the action of microorganisms.

A rotating disc-type water treatment device that contacts organic matter in wastewater while submerged and absorbs oxygen from the air when exposed, promoting the growth of aerobic microorganisms to purify the water.

  • Water treatment equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Design and construction of wastewater treatment plants

Design and construction of wastewater treatment plants

Have you completed energy-saving measures for the wastewater treatment facility?

This is an introduction to the design and construction of wastewater treatment facilities using fine bubble aeration devices that achieve energy conservation and waste reduction.

  • Water treatment equipment
  • Other contract services
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Environmental equipment

Environmental equipment

Grinding chip processing equipment with high recovery capability, etc. Please choose according to your recovery needs.

Our company, a comprehensive manufacturer of magnet application equipment, handles "environmental equipment." We have improved the durability and recovery performance of our grinding chip processing device, the "MagClean MS-FB series," by reviewing the rotational drive structure of the magnetic drum, among other features. We also offer the "KSC-W series" spiral magnetic conveyor, which is suitable for transporting chips discharged during machining in machine tools. With our extensive know-how in magnet application technology, we meet your needs. 【Features (MS-FB series)】 - Achieves smooth discharge even during temporary large inflows of sludge, preventing overflow of grinding fluid. - Capable of handling materials that were difficult to process with drum-type systems due to sludge characteristics or low stone types. - Available in seven sizes with processing capacities from 20 to 240 L/min. - Can be installed according to the machine with optional combinations. - Motor right-mount type can also be manufactured. *For more details, please refer to the PDF document or feel free to contact us.

  • Other environmental equipment
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Film Formation and Heat Treatment Equipment Lineup

Film Formation and Heat Treatment Equipment Lineup

A lineup of equipment suitable for various film deposition, oxide film formation, and annealing processes suitable for semiconductor processing!

We can perform optimal carbon film deposition for SiC as a pre-treatment using PBII, annealing treatment using RTA, and pre- and post-annealing treatments in our company.

  • Other semiconductors
  • Prototype Services
  • EMS
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Study on the decomposition using hydrofluoric acid and nitric acid in the analysis of impurities in silicon.

Study on the decomposition using hydrofluoric acid and nitric acid in the analysis of impurities in silicon.

Minimize exposure to hydrofluoric acid gas for people and improve the work environment! Also contributes to reducing work hours.

This technical document discusses the automatic pre-treatment using hydrofluoric acid and nitric acid for the silicon decomposition (melting) of semiconductor materials and other raw materials, utilizing the automatic pre-treatment device "DEENA" with acid addition and other processes controlled by a PC. When analyzing the silicon (metallic silicon, Si) content and impurities in semiconductor materials, hydrofluoric acid is often used. However, hydrofluoric acid is highly reactive with silicon, requiring careful addition in very small amounts, and during this process, a large amount of hydrofluoric gas is released, necessitating precautions against human exposure. Therefore, we examined the automatic pre-treatment using hydrofluoric acid and nitric acid for the silicon decomposition (melting) of semiconductor materials and other raw materials with DEENA, which can perform tasks such as acid addition, stirring, and measurement automatically under PC control. [Contents] ■ Purpose ■ Overview ■ Reagents Used ■ Analysis Flow, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • image_11.jpg
  • Analytical Equipment and Devices
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Demo unit available for loan] Fully automatic acid heating decomposition pretreatment device DEENA.

[Demo unit available for loan] Fully automatic acid heating decomposition pretreatment device DEENA.

Pre-treatment device for measuring metal components in drainage, soil, and drinking water. It can automatically dilute, add reagents, and make up solutions. Ideal for acid decomposition of glass and metals.

【※Demo unit available for loan!】 This is an acid-addition heating pretreatment device that replaces the microwave pretreatment device. You can customize the addition of acid, heating, dilution, and sample preparation for use. Class A vials conforming to ASTM standards are available. It is characterized by being more affordable than microwave pretreatment devices and having a higher number of samples processed per hour. It can reduce the risk of burns and injuries from acids and contamination. The system that allows for dilution and sample preparation is determined by DEENA. 【Features】 ■ Customizable addition of acid, heating, dilution, and sample preparation ■ Affordable with a high number of samples processed per hour ■ Prevents explosions for the operator handling reagents ■ Promotes decomposition by heating the vials from the sides and bottom ■ Robust and sturdy design guarantees a long lifespan *For more details, please refer to the PDF document or feel free to contact us.

  • Steel
  • Testing Equipment and Devices
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Acid decomposition pretreatment device 'DEENA3' / 'Syringe Dilutor 3'

Acid decomposition pretreatment device 'DEENA3' / 'Syringe Dilutor 3'

Fully automated from acid decomposition pretreatment to sample preparation! Easy operation also avoids human error.

The new 'DEENA3' in the "DEENA series," which can automate analysis in various fields, including metal acid decomposition pretreatment, can heat and decompose up to 300°C. It can perform everything from reagent addition, stirring, heating, cooling, to spike addition and sample preparation fully automatically without human intervention, and it now features a touch screen for easier operation. Additionally, by using the 'Syringe Dilutor 3,' which can automatically create standard solutions and dilute samples, it reduces the tasks previously performed by humans, contributing to time and cost savings. It also helps prevent exposure to hazardous reagents and human errors caused by manual addition. **Features of DEENA3:** - Avoids human exposure to hazardous reagents - Cost benefits from full automation - Reduces blanks by using dedicated vials - Supports sulfuric acid white smoke and Kjeldahl decomposition in addition to nitric and hydrochloric acid decomposition **Features of Syringe Dilutor 3:** - Enables accurate and efficient dilution - Supports large dilutions such as 10,000-fold dilution through stepwise dilution - Designed to prevent contamination of diluted samples - Prevents contamination in the syringe by not drawing samples into the syringe

  • s1.png
  • s2.png
  • Other physicochemical equipment
  • Analytical Equipment and Devices
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Technical Data: Automatic Pre-treatment with Aqua Regia in Work Environment Measurement and Analysis

Technical Data: Automatic Pre-treatment with Aqua Regia in Work Environment Measurement and Analysis

Automatic pretreatment using aqua regia (nitric acid: hydrochloric acid = 1:3) in work environment measurement analysis with DEENA3.

This document introduces the automatic pretreatment using aqua regia (nitric acid: hydrochloric acid = 1:3) in the analysis of work environment measurement using "DEENA3." The analysis of work environment measurements involves complicated reagent addition operations in acid decomposition, which is very labor-intensive. Additionally, there are concerns about human exposure to acid reagents such as hydrochloric acid and nitric acid, making the analysis hazardous. Therefore, we automated the pretreatment of samples for ICP/OES and ICP/MS using the automatic pretreatment device "DEENA3." 【Contents】 ■ Overview ■ Keywords ■ Equipment used ■ Reagents used ■ Analysis flow *For more details, please refer to the PDF document or feel free to contact us.

  • Other physicochemical equipment
  • Analytical Equipment and Devices
  • Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.