coating Product List and Ranking from 572 Manufacturers, Suppliers and Companies

[Discontinued] Pressure Cylinder Fresh UV Neo

[Discontinued] UV and oil-based ink compatible roller cleaner 'Atsubo Fresh UV Neo'

"Pressure Cylinder Fresh UV Neo" is a specialized cleaner for pressure cylinders that quickly dissolves and removes dirt (UV and oil-based inks) adhered to printing machine pressure cylinders. It is often observed that pressure cylinders accumulate dirt such as paper dust and dampening water components. It demonstrates excellent cleaning ability against dirt other than inks as well. This product is highly efficient, combining cleaning with a wax effect that prevents dirt adhesion. 【Features】 ■ Designed as a product not subject to the PRTR Law, Organic Chemicals Regulation, and Fire Service Law ■ Excellent for cleaning both UV and oil-based inks (Note: Fully cured UV inks cannot be dissolved) ■ Combines cleaning with a wax effect that prevents dirt adhesion ■ Uses fine abrasives, so it does not scratch the pressure cylinder ■ Has a moderate viscosity emulsion, allowing for extensive cleaning with a small amount *For more details, please refer to the PDF document or feel free to contact us.

Company：日研化学研究所
Price：Other

Chemicals
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Sold Out] Pressure Cylinder Fresh UV More

[Discontinued] UV and oil-based ink compatible impression cylinder cleaner 'Impression Cylinder Fresh UV More'

"Pressure Cylinder Fresh UV More" is a specialized cleaner for pressure cylinders on printing machines that quickly dissolves and removes dirt (UV ink and oil-based ink) adhered to the pressure cylinder. The pressure cylinder of a printing machine often accumulates dirt such as paper dust and moisture components, and it demonstrates excellent cleaning ability against contaminants other than ink. This product is highly efficient, combining cleaning with a wax effect that prevents dirt adhesion. It was developed as a reformulated product of the sister product "Pressure Cylinder Fresh UV" with less harmful components. 【Features】 ■ Designed as a product not subject to the PRTR Law and the Poisonous and Deleterious Substances Control Law ■ Excellent cleaning power for both UV ink and oil-based ink adhered to the pressure cylinder (Note: fully cured UV ink cannot be dissolved) ■ Combines cleaning with a wax effect that prevents dirt adhesion ■ Uses fine abrasives, so it does not damage the pressure cylinder ■ As it is an emulsion with moderate viscosity, it allows for extensive cleaning with a small amount *For more details, please refer to the PDF document or feel free to contact us.

Company：日研化学研究所
Price：Other

Chemicals
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Sold Out] UV Moist

[Discontinued] UV Printing Continuous Water Supply System Polymer Rubber Roller Cleaning Agent 'UV Moist'

"UV Moist" is a high-performance and easy-to-use water-based cleaning agent for UV inks that addresses the issues previously encountered (since UV inks have different components from oil-based inks, the solvent power of water-based cleaning agents for oil-based inks was insufficient for UV inks. This also caused water films not to form on the water rods after cleaning, making it difficult to wipe off the ink). 【Features】 ■ High solvent power for UV inks ■ Good wiping feel on rollers ■ Makes rollers hydrophobic and forms a uniform water film *For more details, please refer to the PDF document or feel free to contact us.

Company：日研化学研究所
Price：Other

Chemicals
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nikken UV Cleaner G1

Next-generation UV ink cleaning agent that takes the environment into consideration.

The "Nikken UV Cleaner G1" is increasingly spreading as an environmentally friendly printing solution, with UV printing gaining popularity. On the other hand, regulations on chemical substances are becoming stricter, and materials for UV printing are no exception. To achieve safer cleaning operations, Nikken Chemical has developed a next-generation UV ink cleaner. This product is environmentally friendly while also excelling in cleaning performance, drying properties, and cost performance. It contributes to reducing environmental impact and costs in UV printing. 【Features】 ■ Designed as a product not subject to the PRTR law ■ A low-odor UV ink cleaner with excellent cleaning power ■ Minimizes impact on rubber components compared to typical UV ink cleaners ■ Specifically designed for ink rollers; not suitable for use on blankets (can be used in automatic cleaning devices for ink rollers) *For more details, please refer to the PDF document or feel free to contact us.

Company：日研化学研究所
Price：Other

Chemicals
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glaze Buster SG

It is a high-performance glaze remover suitable for both UV and oil-based products.

- It is a high-performance glaze remover that is compatible with both UV and oil-based inks. - It removes stubborn glaze adhered to ink rollers. - It restores the ink transferability of the rollers. 【Features】 ■ Formulated as a low-risk weak alkaline type. ■ Excellent glaze removal capability while also preventing glaze for an extended period. ■ Can be easily cleaned without damaging the rollers, as it does not contain abrasives. ■ Suitable for daily roller cleaning. ■ Effective for both UV and oil-based printing. *For more details, please refer to the PDF document or feel free to contact us.

Company：日研化学研究所
Price：Other

Chemicals
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure Cylinder Fresh SI

This is a dedicated emulsion cleaner for UV and oil-based inks.

- This is a dedicated emulsion cleaner for both UV and oil-based inks. - It physically removes stubborn ink stains adhered to the impression cylinder. - It prevents dirt with excellent water and oil repellency wax effects. 【Features】 ■ Excellent for cleaning both UV and oil-based inks. * Fully cured UV inks cannot be dissolved. ■ Can simultaneously remove hydrophilic components like paper dust. ■ With a moderate viscosity emulsion, it allows for extensive cleaning with a small amount. ■ Contains fine abrasives that do not damage the impression cylinder. ■ Combines cleaning with a wax effect that prevents dirt adhesion. * For more details, please refer to the PDF document or feel free to contact us.

Company：日研化学研究所
Price：Other

Chemicals
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Danpo Ace GD

This is a Maltone cleaner that excels in cleaning power and is suitable for both UV and oil-based applications.

- It is a molten cleaning agent that excels in cleaning power for both UV and oil-based inks. - It has excellent hydrophilicity, allowing for easy rinsing with water. - The ink adhesion prevention effect on the molten stabilizes the water output. 【Features】 ■ Excellent cleaning power for both UV and oil-based inks ■ Quickly removes oligomers, monomers, and resin components from UV inks ■ Improves the moisture retention of fibers while cleaning the molten ink ■ Highly hydrophilic, easily rinsed off with water ■ Prevents re-adhesion of ink to the molten after cleaning *For more details, please refer to the PDF document or feel free to contact us.

Company：日研化学研究所
Price：Other

Chemicals
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass coat solvent "G-POWER 65"

It is a type of glass coat solvent that reacts with moisture to form a silica film.

"G-POWER 65" is a revolutionary glass wrapping agent that applies the technology of bulletproof glass. It disperses and absorbs impact, providing strong protection for the underlying surface. With a hardness level of 9H or higher, it protects the base from scratches and maintains a clean condition. Additionally, it boasts overwhelming ultra-durability that continues to maintain its coating even in harsh environments. 【Features】 ■ Shock absorption that exceeds common sense ■ Incredible scratch resistance ■ Overwhelming ultra-durability ■ Heat resistance (tested with a 1500°C burner) ■ Alkali resistance, etc. *For more details, please download the PDF or feel free to contact us.

Company：アラジン
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low-temperature DLC film deposition device (multilayer a-C:H, hydrogen-containing Cr system)

Multi-layer film formation enables the improvement of load-bearing capacity for low-temperature DLC (Diamond-like carbon) thin film hard coatings!

High-density and stable high-quality film formation is possible! By performing DLC film formation that is highly hard (wear-resistant), has a low friction coefficient (wear-resistant), is corrosion-resistant, adhesion-resistant, and smooth, we contribute to the longevity of mold parts for semiconductor manufacturing equipment, resin molding molds, sliding parts, and tools. This is not only optimal for reducing customer costs but also for reducing maintenance work hours such as cleaning tasks and improving operations. It is also possible to achieve "strong adhesion, smoothness, and hard low-temperature DLC film formation" for three-dimensional ultra-precise complex-shaped molds and machine parts. In addition to improving hardness and wear resistance, we also accept "peeling treatment and re-coating," contributing to the reduction of product lifecycle costs and material waste, thus reducing environmental impact. ++++++++++++++++++++++++++++++ DLC stands for Diamond-Like Carbon, which refers to a hard thin film coating with good sliding properties that has intermediate characteristics between diamond and graphite. By adjusting the ratio of SP3 (diamond bonds) to SP2 (graphite bonds) and the ratio of H (hydrogen) contained within, as well as by applying multilayer coatings, it is possible to create thin films with various physical properties and characteristics (industrial value).

Company：Creative Coatings Co., Ltd.
Price：Other

Plasma surface treatment equipment
Surface treatment contract service
Other semiconductor manufacturing equipment
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Anti-reflective coating "Excel Pure"

It forms a low refractive index layer and exhibits excellent anti-reflection effects.

We would like to introduce the anti-reflective effect of our inorganic anti-fouling coating agent "Excel Pure." "Excel Pure" demonstrates excellent anti-fouling, self-cleaning, and static electricity prevention effects while simultaneously forming a low refractive index layer, exhibiting outstanding anti-reflective properties. It can be applied in a wide range of fields, including lenses and displays. *For more details, please refer to the external link or PDF materials, or feel free to contact us.

Company：中央自動車工業営業開発部　営業推進グループ
Price：Other

paint
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fabric Coating for Fiber Protection

A special coating film is formed on each individual fiber! Water-repellent and oil-repellent coating for fibers.

"Fabric Coating" is a protective coating for fabrics that guards against various stains. It forms a coating film that combines both water-repellent and oil-repellent effects, protecting the fabric from dirt. It is effective against stains from coffee and juice, as well as oil stains from potatoes and sebum. 【Features】 ■ Excellent stain resistance ■ Considerate of skin and the environment ■ Effect duration of approximately 3 years ■ Water-repellent: Effective against stains from coffee and juice ■ Oil-repellent: Effective against oil stains from potatoes and sebum *For more details, please refer to the PDF document or feel free to contact us.

Company：中央自動車工業営業開発部　営業推進グループ
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Protective Coating "Leather Coating"

Forms a protective film that preserves the texture of leather! Protective coating for leather (genuine leather and synthetic leather).

"Leather Coating" is a protective coating that suppresses aging while preserving the texture of leather (genuine leather and synthetic leather). By forming a protective film with a protective effect over the surface treatment applied to leather (genuine leather and synthetic leather), it helps to prevent deterioration. Through three-dimensional cross-linking, it creates a dense and strong film that suppresses deterioration due to friction, while also protecting against color transfer and dirt, allowing the new leather texture to last for a long time. [Features] ■ Suppresses deterioration such as darkening and wrinkling ■ Makes it difficult for color transfer and dirt to adhere and easy to remove ■ Effect duration of approximately 3 years *For more details, please refer to the PDF document or feel free to contact us.

Company：中央自動車工業営業開発部　営業推進グループ
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Solving various challenges with high value-added coatings! Prevention of deterioration.

Achieving high durability for applications such as fading and rust prevention for resin, metal, and leather products, protecting against scratches and fading, allowing for long-term use!

Our "Deterioration Prevention Coating" is applied to various products as a high-value-added coating across a wide range of materials and fields. While resin fences and deck boards are more durable than natural wood, prolonged exposure to ultraviolet rays can still lead to fading. We respond to the need to maintain the color of resin for a longer period. We also accept OEM supply depending on the quantity. 【We solve these concerns!】 ■ We want to prevent fading of resin panels. ■ We want to prevent rust on metal parts. ■ We want to prevent deterioration of leather products. *For more details, please refer to the PDF materials or feel free to contact us.

Company：中央自動車工業営業開発部　営業推進グループ
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

UV-curable headlight coating "RX3240"

Strong against yellowing and cloudiness caused by ultraviolet rays! With a short curing time of 40 seconds, delivery is possible even on rainy days.

The "RX3240" is a UV-curable headlight coating that possesses performance equal to or greater than that of genuine hard coatings among aftermarket products. It excels in abrasion resistance, chemical resistance, and UV resistance, containing more than twice the amount of UV absorbers found in commercial products. Additionally, the incorporation of silicone and nano-silica creates a structure that is difficult to peel off. It complies with the standards set by the United Nations Economic Commission for Europe (ECE) for headlight applications and the AMECA, the registration body for automotive parts in the United States, ensuring safety. 【Features】 ■ Improved weather resistance ■ Enhanced abrasion and chemical resistance ■ Conformity to the substrate ■ Three-dimensional hybrid structure ■ Complete curing in as little as 40 seconds ■ Compliance with headlight regulations *For more details, please refer to the PDF document or feel free to contact us.

Company：LASTHOPE
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Organic-Inorganic Hybrid Coating "Silicera Coat 8011"

Introducing a coating for industrial equipment that has excellent non-stick properties and high hardness!

Shiriseracoat 8011 is an organic-inorganic hybrid coating paint that achieves non-stick properties comparable to silicone and a high hardness that far exceeds that of fluorine, with ceramic as the main material. It is proposed as a new solution to issues related to release properties and slip characteristics of industrial machine parts (such as rolls and guide components) that could not be resolved by conventional fluorine or silicone coatings. 【Features】 ■ Excellent non-stick properties… Adhesive tape does not stick at all. Good release from resins and adhesives. Also suitable for releasing other materials such as food. ■ High hardness and durability… It has excellent wear resistance with a pencil hardness of 6H (standard H for fluorine coatings). Non-stick durability is also good. ■ Good slip properties… It has a smooth surface, allowing for good sliding of workpieces. It is also suitable for coating transport system components. ■ Suitable for food applications… It has obtained compliance with the old Food Sanitation Act, making it possible for use in parts for food applications. *It does not comply with the revised Food Sanitation Act (during the transitional period). ■ Low-temperature processing compatible… Processing is possible at low temperatures of 100 to 250 degrees. This reduces the risk of warping or deformation due to heat. It can also be coated on CERP and resin materials.

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Processing Contract
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating films specialized for food resistance: 'TC5041' and '5020'

A coating that has no vapor permeability, excellent mechanical strength, and superior chemical resistance to chemicals and organic solvents.

"TC5041" and "TC5020" are corrosion-resistant coatings that possess excellent durability against chemical agents and organic solvents, have no vapor permeability, and exhibit superior mechanical strength. They are mainly used in chemical plants for exhaust ducts, pure water tanks, as well as in liquid crystal and semiconductor factories, tanks, and pipes, and continue to operate for extended periods.

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to Surface Treatment Processing Business [Contract Processing]

We handle processing from small parts to large and long items! Our surface treatment for industrial equipment provides excellent results for release, non-stick, corrosion-resistant, wear-resistant, and sliding parts.

Our company uses a special coating technology that combines organic materials such as fluororesin and silicone resin with inorganic materials like ceramics to address issues of adhesion (non-stick), sliding (slip), wear (abrasion resistance), and corrosion (corrosion resistance) in industrial machinery across various fields including chemicals, papermaking, automotive, food, textiles, and hygiene products. We offer high-performance non-stick and sliding solutions tailored to our customers' needs and usage environments, supported by a diverse range of processing recipes. 【Features】 ■ Coating is possible on large substrates measuring 2.5m × 2.5m × 10m ■ We propose better surface treatments for various manufacturing process challenges ■ Solutions and improvements for adhesion issues on metal surfaces using fluororesin and silicone resin We also accept requests for evaluation samples and prototypes. Please feel free to contact us through the inquiry form.

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Processing Contract
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Improved wear resistance and durability of fluorine coating! 'XPC Grade'

Composite coating: Achieving further durability improvement with the combination of ceramic thermal spraying and fluorine coating!

Attention those struggling with durability in standard fluorine coatings! The 'XPC Grade' enhances adhesion compared to regular fluorine coatings by applying a ceramic or alloy thermal spray layer beneath our Tempcoat. This results in improved wear resistance and durability. Additionally, by utilizing the unevenness of the thermal spray layer to adjust the surface condition (roughness) of the fluorine coating, a new surface state for fluorine coatings can be achieved, leading to improved adhesion of the product.

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Processing Contract
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Video Introduction] The adhesive tape doesn't stick! 'PC1137'

"Plasma Coat" is effective against all types of adhesives! It solves the problem of unwanted sticking.

"Plasma Coat (super non-stick treatment)" has high hardness and durability of thermal spray coatings made from metals, cermets, ceramics, etc., along with the extremely high non-stick properties of silicone resin, and also possesses high grip friction characteristics. "PC1137" is a composite coating of ceramic thermal spray and silicone. It has a proven track record as a non-stick solution for various components such as guide rollers and receiving bases. Plasma Coat can be applied not only to metal components like aluminum, stainless steel, and iron, but also to CFRP materials. *Please note that the video has sound.*

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Processing Contract
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Video Introduction] Easily remove adhesives and sticky substances! 'TC2001'

"Tempcoat" is effective against all types of sticky substances! It solves the problem of unwanted sticking.

"Tempcoat (Fluorine Coating)" is a coating treatment that possesses various characteristics such as non-stick properties, low friction, and chemical resistance, which are functions of fluorine resin. We offer a lineup of various fluorine coatings, including PTFE, PFA, FEP, and ETFE, and we can propose coatings that meet your requirements. "TC2001" has a proven track record as a non-stick solution for various components such as hot melt tanks, adhesive-coated parts, painting jigs, guide parts in food manufacturing processes, and hoppers. Please consider it as a means to improve the release properties and cleaning performance of conventional parts. *Please note that the video has sound.

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Processing Contract
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to Surface Treatment Processing Steps

Our company consistently handles everything from surface preparation to finishing polishing after painting in-house, striving for stable quality.

■Receiving and Preparing Base Material from Customers 1. Incoming Inspection of Base Material: Conduct visual inspections for scratches and confirm part numbers and quantities in advance. 2. Removal of Contaminants such as Oil and Dust Attached to Base Material: Depending on the material and size of the base material, perform oil removal through high-temperature treatment and solvent-based cleaning. 3. Masking Treatment: Apply appropriate masking to areas where processing is not required. ■Substrate Processing to Surface Processing 1. Substrate Processing (Blasting Process): To remove the oxide film on the base material and enhance adhesion, roughen the surface using blasting materials. 2. Thermal Spraying Process: Spray molten metal or ceramic particles onto the base material using a heat source to form a functional coating on the surface. 3. Coating Process (Fluororesin Coating, Silicone Resin Coating): Perform fluororesin or silicone resin coating according to the customer's usage conditions, applications, and characteristics. ■Finishing Polishing to Inspection 1. Finishing Polishing and Inspection: Carry out finishing processes such as polishing according to specifications. Propose solutions tailored to the customer's usage environment, including surface roughness and coating thickness.

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Processing Contract
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Video Introduction] Improve the sliding of conveying system components! 'TC7808'

The low friction properties of "Tempcoat" improve clogging and snagging issues during product transport.

"Tempcoat (Fluorine Coating)" is a coating treatment that possesses various characteristics such as non-stick properties, low friction, and chemical resistance, which are functions of fluororesin. We offer a lineup of various fluorine coatings including PTFE, PFA, FEP, and ETFE, and we will propose a coating that meets your needs. "TC7808" improves the slip properties of various products such as guide components for transport systems, resins, rubber, and food, solving problems during product transportation. Please consider it as a means to enhance the release properties of conventional components and improve cleanability. *Please note that the video will have sound.

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Processing Contract
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exhibition at Plastic Japan! Plasma Coat / Silicera Coat 8022

Effective as various adhesion countermeasures! With high release properties and durability, it solves challenges on the manufacturing line.

The "Plasma Coat (Super Non-Stick Treatment)" features high hardness and durability of thermal spray coatings made from metals, cermets, ceramics, etc., along with the extremely high non-stick properties of silicone resin, and also possesses high grip friction characteristics. The "Shiricera Coat 8022" is a special silicone-based coating that achieves exceptional non-stick properties and surpasses fluorine-based coatings in hardness. It allows for lower temperature processing (180°C) compared to fluorine-based coatings, which helps suppress deformation of the substrate due to heat. Coating is possible on metal components such as aluminum, stainless steel, and iron. *Some CFRP components may also be applicable. Please consult separately. We will be exhibiting at "Plastic Japan," which will be held at Makuhari Messe from October 29 to October 31, 2024. We will have samples prepared, so please stop by when you visit!

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Processing Contract
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super non-stick coating 'S-8010' with reduced roughness.

The low surface roughness silicone coating 'S-8010' responds to the voice saying, 'The surface is rough in Ognas...'

"OGNAS" is designed for various thermal spraying and silicone composite coatings, resulting in a surface roughness of the thermal spray coating on metals and ceramics that appears as a pearlescent texture. While the thermal spray coating offers benefits in terms of point contact and release properties, its roughness can sometimes affect customer products, leading to cases where desired applications cannot be used. In response to such feedback, we have newly added the silicone coating "S-8010," which forms fine irregularities without using thermal spraying. This is a composite coating that forms a base layer of special metallic fine powder and disperses silicone. Like OGNAS, it exhibits excellent release properties, preventing adhesive tapes and adhesives from sticking. The pencil hardness is above 4H, and it can be used at temperatures up to approximately 200°C. We can also provide coating sample plates. Please make use of it for adhesion prevention measures on film rollers and guide components.

Company：大阪ガスケミカル株式会社　奈良表面加工センター
Price：Other

Surface treatment contract service
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lubricating Coating for PFAS-Compatible Rubber: Painting and Processing Examples

Introduction of a case where a lubricating coating for PFAS-compatible rubber was applied.

We would like to introduce a case of lubricating coating for PFAS-compatible rubber conducted at Musashi Metal Corporation. The processing details include alcohol degreasing, spray painting, and firing. 【Processing Details】 ■ Alcohol Degreasing ■ Spray Painting ■ Firing *For more information, please download the PDF or feel free to contact us.

Company：武蔵金属
Price：Other

Painting Machine
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contact Angle Meter LSE-ME Series

Simple measurement without taking up space.

The "LSE-ME Series" is a compact contact angle meter. We offer two basic models: ● LSE-ME51 Equipped with an X-axis (left-right) moving stage for contact angle measurement. ● LSE-ME41 A minimal configuration model for those who only need static contact angle measurement. Despite its small size, it supports a variety of measurements: - Contact angle measurement (time-dependent, static) - Interfacial tension measurement - Expansion and contraction measurement - Inclination measurement - Surface free energy If you have any questions, please feel free to contact us.

Company：ニック
Price：500,000 yen-1 million yen

Other measurement, recording and measuring instruments
Image Processing Software
Other physicochemical equipment
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to DLC Dry Coating

Eco-friendly coating that forms high-quality DLC films!

Fine Coating Co., Ltd. conducts 'DLC coating' that enables the formation of high-quality DLC films through unique methods different from other companies, based on technology contracted in Nagasaki Prefecture. Since the main components of DLC films are carbon and hydrogen, which are found in nature, they do not adversely affect the human body, and because the coating does not use liquids like plating, no waste liquids are discharged. Additionally, there are various achievements in DLC coating on materials such as plastic and combinations of metal and plastic. 【Features】 ■ Low-temperature (below 150°C) plasma treatment technology ■ Film thickness control technology (nano-order) ■ Large chamber for mass processing (mass production capability) *For more details, please download the PDF or feel free to contact us.

Company：ファインコーティング本社
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reviving sharpness through regrinding and recoating, contributing to cost reduction.

Reviving sharpness through regrinding and recoating contributes to cost reduction!

We would like to introduce our regrinding services. We accept requests for surface treatment (coating) even for just one piece or one item. Regarding surface treatment (coating), we can accommodate TIALN/TIN/DLC/TiCN, etc. If you are unsure whether regrinding is possible, please feel free to consult us. 【Features】 ■ Possible for one piece or one item ■ Requests for surface treatment (coating) only are also accepted ■ Can accommodate TIALN/TIN/DLC/TiCN and others ■ Flexible response to pricing and specifications *For more details, please refer to the PDF document or feel free to contact us.

Company：ワールドツール
Price：Other

Wafer processing/polishing equipment
Other abrasives
others
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Development and Solution Case] Semiconductor Manufacturing Related

We propose coating with fluororesin! Here are examples related to semiconductor manufacturing!

We would like to introduce development and solution examples related to semiconductor manufacturing. Fluororesin molded products are adopted for the chemical resistance and high purity of parts that make up semiconductor manufacturing equipment. However, for parts that require mechanical strength, it was not possible to use fluororesin molded products alone. Our company proposes to change the parts from resin to metal and to coat the metal parts with a fluororesin coating that excels in chemical resistance and high purity. By adopting the fluororesin coating, it becomes possible to use metal parts, ensuring mechanical strength. 【Development and Solution Examples】 ■ Proposal - Change parts from resin to metal - Propose coating with fluororesin that excels in chemical resistance and high purity ■ Benefits of adopting fluororesin coating - Enables the use of metal parts, ensuring mechanical strength - Ensures chemical resistance, preventing deterioration of equipment due to corrosive environments - Ensures high purity, preventing contamination of equipment due to metal ion leaching - Ensures water repellency, reducing the adhesion of residual chemicals and contaminants *For more details, please feel free to contact us.

Company：日本フッソテクノコート
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to the Basics of Fluororesin (PTFE)

If you have concerns such as "I want more glide," please feel free to consult with us anytime!

We are engaged in the contract processing and sales of fluororesin coatings and linings at Nippon Fusso Technocoat. Here is an introduction to "Basic Knowledge of Fluororesins (PTFE)." Fluororesins have various properties such as heat resistance, corrosion resistance, non-stick characteristics, sliding properties, thermal meltability, high purity, and prevention of leaching. This time, we will focus on a representative fluororesin called "PTFE (Polytetrafluoroethylene)." Its molecular formula is -(CF2-CF2)n-. It has extremely strong molecular bonds of C-C and C-F. The continuous use temperature is 260°C, and the melting point is 327°C, which is exceptionally high for resins. The dynamic friction coefficient is 0.1, indicating extremely high sliding properties and non-stick performance. Examples of applications include sizing cylinders, rolls, shoots, guides, and various food processing equipment. If you have concerns such as "sticking is a problem" or "I need sliding," please feel free to consult us at any time. If you are struggling with "sticky substances sticking," we can also introduce our strong adhesive release coating "Tack-Free." *For more details, please feel free to contact us.

Company：日本フッソテクノコート
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

coating Product List and Ranking from 572 Manufacturers, Suppliers and Companies | IPROS GMS

coating Manufacturer, Suppliers and Company Rankings

coating Product ranking