Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
151～180 item / All 308 items
While partially applying heat sealing to two rolls of film, it can be cut into sheets with two layers and rounded corners on all four sides.
It can read photoelectric tube marks, so it is compatible with various printed materials. Additionally, it is equipped with a transmissive defect detection device, which allows it to detect defects in cases of issues with coating, printing, lamination, etc., and remove only the defective parts.
For DIY car bed kits and firm cushions!
This product is a high-quality cushion that combines high-resilience urethane and high-resilience sponge with chip urethane. It is made of ester-based low-flammability urethane foam, which is dense like a cosmetic puff, has good elasticity, and features a high rebound and high resilience with a firmer specification. It is one of the materials that excels in terms of durability and permanent deformation, and is mainly used as high-end cushioning material or packing material. 【Features】 ■ High density and elasticity ■ High rebound and high resilience ■ Minimal sagging ■ Can be combined with chip urethane and used as cushioning material for DIY car bed kits ■ Suitable for firm bench seats and firm sofa cushion materials *For other functions and details, please contact us directly.
Cost advantages with overseas processed products!
CNC machining produces individual parts from block materials through mechanical processing. Wire cutting is a technique that uses electric current flowing through brass wire to cut metal. It can accommodate fine processing, such as thin fins, which cannot be done with CNC. Both methods are suitable for small-scale production. When manufactured in Japan, expensive CNC machining and wire cutting can be kept at low costs when produced overseas. With relatively short lead times, these methods are ideal for cases where only a few prototypes are needed. Advantages: Production is possible from a single piece. We will consider orders for prototypes or small quantities.
Capable of addressing various industries and fields with deep grooves, corner rounding, small diameter holes, deep holes, artificial cracks, complex shapes, and more, which cannot be achieved through machining or cutting processes!
Our company offers wire cutting processing. We can accommodate various industries and fields with deep grooves, corner rounding, small diameter holes, deep holes, artificial cracks, and complex shapes that cannot be achieved through machining or cutting processes. If the material is a conductive metal, we can also process ceramics like graphite and SiC under certain conditions. We can work with materials that are often avoided in cutting, such as nickel-based Inconel, titanium, and stainless steel, as well as hard materials. 【Features】 ■ Processing is carried out non-contact ■ Minimal residual stress in the material, gentle processing method ■ No need for mounting jigs or clamps ■ Effective means for small lots and prototypes *For more details, please refer to the PDF document or feel free to contact us.
UV cut to suppress insect intrusion! Measures against foreign matter contamination in food factories and similar environments! No glass shattering.
The "Ubic Lamp Series" is lighting that cuts out "ultraviolet rays," which attract insects. It is ideal for preventing foreign matter contamination in food factories and similar environments by suppressing insect arrival. Additionally, the Teflon coating prevents the scattering of glass fragments. This helps prevent secondary damage during earthquakes and is beneficial for obtaining ISO/HACCP certification. The lineup includes three types: "mercury lamps," "ceramic metal halide lamps," and "fluorescent lamps." 【Features】 ■ Almost completely cuts wavelengths (ultraviolet rays) below 400nm, which insects are highly responsive to ■ Prevents fading and discoloration due to UV cut ■ Options available for "UV cut only" or "scattering prevention only" according to your needs ■ Many proven results in major food manufacturers and factories *For more details, please download the catalog or contact us.
Sharp cross-section! It's a bite that tears rather than cuts.
The urethane bite "Ace Cut" is a cutting bite for various elastomers such as urethane, rubber, and soft vinyl. It achieves cutting at five times the speed compared to conventional products. Moreover, it cuts sharply without producing chips, resulting in a vertical and beautiful cutting surface. Those who are dissatisfied with conventional cutting bites will surely be satisfied. Additionally, a new exchangeable bite system has been introduced! It is now possible to perform cutting up to φ100, which was previously impossible. For more details, please contact us or refer to the catalog.
Lightning sharpness, Serap series. A cutting file.
The tips of conventional files are polished using a special grinding method. The cutting ability is 2 to 3 times better than conventional files (5 times better than those made in China). Work efficiency is improved, making it particularly suitable for iron, SUS, and brass. For more details, please contact us or refer to the catalog.
Regrinding is also OK! A metal saw with an uneven pitch. It is effective just like uneven pitch, unnecessary lead end mills, and saw chains!
In the case of uneven pitch and uneven lead end mills, as well as saw chains (chainsaws), uneven pitch is common. It is believed that suppressing chatter vibrations leads to various benefits, including reduced cutting noise, extended tool life, and improved cutting speed. Have you ever heard of a metal saw with an uneven pitch? For some reason, metal saws did not have uneven pitches. Therefore, S&K SALES has developed a metal saw with an uneven pitch called "Thunder Cut"! It is also possible to regrind existing metal saws into Thunder Cuts. 【Features】 ■ Increased productivity ■ Suppression of chatter vibrations ■ Improved processing accuracy and stable cutting ■ Extended tool life and enhanced durability ■ Faster cutting speed, enabling high efficiency ■ Reduced occurrence of cutting burrs, improving post-processing workability *For more details, please refer to the PDF available for download.
Regrinding is also OK! A metal saw with an uneven pitch for stainless steel / SUS. It is effective just like uneven pitch and uneven lead end mills or saw chains!
In the case of uneven pitch and uneven lead end mills, as well as saw chains (chainsaws), a general uneven pitch is common. It is believed that suppressing chatter vibrations leads to various benefits, including reduced cutting noise, extended tool life, and improved cutting speed. Have you ever heard of a metal saw (for stainless steel/SUS) with an uneven pitch? For some reason, metal saws did not have uneven pitches. Therefore, S&K SALES has developed a metal saw with an uneven pitch called "Thunder Cut"! It is also possible to regrind existing metal saws for stainless steel into Thunder Cut. 【Features】 ■ Increased productivity ■ Suppression of chatter vibrations ■ Improved processing accuracy and stable cutting ■ Extended tool life and enhanced durability ■ Faster cutting speed and improved efficiency ■ Reduced occurrence of cutting burrs, improving post-processing workability *For more details, please refer to the PDF available for download.
Among wire cutting methods, the machine that pursues speed even more is molybdenum wire cutting! It can achieve ultra-high-speed processing!
The equipment we sell is a wire cutting machine specifically designed for cutting, as indicated by its name, the "CNC Wire Electrical Discharge Precision Contour Machine." While it is common for other companies to use brass wire for wire cutting, our equipment utilizes molybdenum steel wire. Molybdenum steel has excellent toughness, allowing for high-speed processing of workpieces. Even materials that cannot be cut with a contour machine can be processed by our equipment through electrical discharge machining, as long as they are conductive! *For product details and processing case data, please refer to the catalog or contact us.*
![Wire cutting [Easy operation that anyone can do]](https://image.mono.ipros.com/public/product/image/fad/2000566161/IPROS16436359213562797879.png?w=280&h=280)
Our wire cutting machine can be easily operated by anyone using dedicated CAD/CAM software! If it's just cutting, you don't even need the software!
Among NC machines, wire cutting is perceived to be relatively easy to operate. However, for someone who knows machining, it may be simple, but for beginners, it’s understandable to think, "I don’t understand anything!" or "It’s complicated!" Nonetheless, our machines are designed to be easy even for beginners! In fact, the operation explanation can be completed in half a day, and in extreme cases, you could be able to operate it in just one hour. To put it another way, if it’s just cutting (cutting process), you can learn it with about ten minutes of explanation! You just need to set the workpiece and press the button for the direction you want to cut! Please experience it for yourself. We also welcome visits to see the actual machines. Feel free to contact us!
By repeatedly using wire and not using ion exchange resin, running costs can be reduced by 60%!
By introducing our molybdenum wire cutting machine, you will significantly reduce your running costs. As a fundamental premise, it is faster than conventional wire cutting machines, so cost reduction due to shorter processing times is naturally expected. Even when operated for the same amount of time, the running costs, including electricity and consumables, are also lower! If operated for 100 hours, the running costs of a conventional wire cutting machine are said to be around 50,000 yen. With our molybdenum wire cutting machine, it would be about 19,500 yen, resulting in a reduction of approximately 60%. Why? The reasons are: → The wire can be reused repeatedly. → It uses a spraying method, so ion exchange resin is not necessary. We have detailed materials available, so please feel free to contact us.
Responding to a variety of processing needs in a short time! Processing can be done without deforming the material.
Ariake Giken Co., Ltd. offers laser cutting that allows processing without deforming the material. Utilizing laser light for cutting and machining, it is suitable for processes that were impossible with traditional tools and cutting devices. Since the processing is done without contact, the material does not deform due to stress or pressure during processing, enabling a variety of processes to be completed in a short time. Additionally, by automating pipe processing with the 11-axis laser processing machine FABRI GEAR, we aim to reduce labor in the production of frames. Please feel free to contact us when you need our services. 【Manufacturing and Processing Achievements】 ■ Covers ■ Seismic brackets ■ Handrails ■ Showers ■ Brackets ■ Security boards *For more details, please refer to the related link page or feel free to contact us.
The cumbersome and dangerous tasks are eliminated through automation! Since they can be purchased by unit, it is possible to select and combine equipment that suits the site.
Automating Box Unpacking ■Compatible with various sizes of cardboard: It can automatically detect and position the size of the cardboard, making it compatible with various sizes of boxes. ■Does not damage the contents of the box: By cutting the tape and flaps, it allows for the contents to be removed without damage. ■Accommodates surface irregularities: The cutting mechanism follows the contours of uneven surfaces, allowing it to handle deformed boxes. Tape Cutting ■Boxes can be reused: Specializing in tape cutting prevents damage to the contents and allows for box reuse. It also supports I-taping and H-taping of the tape. Inner and Outer Flap Cutting ■Easy removal of contents: Flaps are automatically cut, making it easy to access the contents. *For more details, please refer to the PDF document or feel free to contact us.
High-quality, straight line, curve, circle cutting handheld universal machine
Handy type that achieves high quality with abundant options and precise cutting.
Low-cost earthquake measures! With two sliding sheets, the building's shaking can be reduced to a maximum of seismic intensity 5.
The "Base Isolation System" can reduce the shaking of a building during a major earthquake to a maximum of seismic intensity 5 by placing two sliding sheets under the foundation of the building. *This is based on the vibration test results obtained when acquiring the technical review certification from the general incorporated association Better Living. By preventing damage and collapse of buildings and the tipping and falling of furniture caused by major earthquakes, it can be utilized as a new earthquake countermeasure to protect "family lives" and "the value of residential property" at a low cost. 【Features】 ■ Reduces shaking from major earthquakes to seismic intensity 5! → Two overlapping sliding sheets dissipate the forces of the earthquake → Reduces shaking from earthquakes of seismic intensity 7 class to seismic intensity 5 ■ Protects family lives! → The reduction in shaking helps prevent damage to buildings and tipping of furniture caused by major earthquakes ■ The sliding sheets are highly durable and long-lasting! → High-performance sheets designed for repeated earthquakes are used → Maintains performance over a long period ■ Satisfactory free plan! → Since it only requires placing sliding sheets under the foundation, it allows for flexible building design For more details, please contact us or download the catalog.
Cutting chips and cutting sounds indicate astonishing cutting performance; specialists in difficult-to-cut materials have further evolved.
■Product Name■ KT7487 4-Flute Carbide End Mill for Titanium Cutting - Roughing KT7607 4-Flute Carbide End Mill for Titanium Cutting - Finishing
The variable cut patent has been obtained.
Variable cut is a processing method proposed by Akebono Machinery that utilizes (1) the properties of the material (reaction force) and (2) can control the movement of the adhesive (overflow).
A versatile slicer that excels in three functions! It can slice, julienne, and dice! It processes without breaking the fibers, preserving the freshness and flavor of fish!
The "Super Slicer Series" maximizes the appeal of ingredients themselves and expands new possibilities. It performs three functions in one device, allowing for slicing, julienne, and dicing through blade replacement. Vegetables can be processed without applying excessive pressure that would damage their fibers, while fish can be processed while maintaining freshness and flavor. Meat can also be cut safely and hygienically while preserving its freshness and taste. Fruits are perfect for ice cream, sweets, cakes, tarts, and jams! 【Cut Types】 ■ Slice (0.3–10 mm) ■ Julienne (0.7–10 mm) ■ Dice (1.2–10 mm) *The available sizes may vary depending on the ingredient. *For more details, please request materials or view the PDF data available for download.
This is a sound-absorbing finishing material that combines high-density glass wool with decorative fabric to adjust the acoustics of indoor spaces.
Sonocut KG is a non-combustible material made from glass cloth, making it safe against fire. Sonocut KS is suitable for large space installations. It can be used for a wide range of applications, from residential living spaces to high-quality acoustic environments. For more details, please download the catalog from the URL below.
Precision laser processing of paper and film in roll-to-roll format. Small lots are acceptable.
- Flexible and highly customizable design cuts are possible - Wide-width processing in roll-to-roll format (up to 1050 mm) - Maintains barrier properties by not cutting the aluminum foil - Marking of variable information such as numbering and dates - Supports small lot production (no mold manufacturing required)
Selectable "Electric" and "Kerosene" W Far Infrared
The surface is arch-shaped and covers a wide area.
A filter that only transmits visible light! It blocks ultraviolet wavelengths and near-infrared wavelengths up to 1150nm.
The "IRCF" is a product that has an AR coating on one side and a UVIR cut coating on the other side, based on non-polished glass. It only transmits visible light while blocking ultraviolet wavelengths and near-infrared wavelengths up to 1150nm. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Product composition: Both sides (IRCF/AR) coated product ■ Coating materials: TiO2+SiO2/- ■ Substrate: D263Teco ■ Size: 76×76mm ■ Thickness: 0.3mm (t) *For more details, please refer to the PDF document or feel free to contact us.
Utilizing the cutting energy of ultra-high pressure water and abrasive materials without loss, achieving high cutting capability!
"WAS (Water Abrasive Suspension) Jet Cutting" is a cutting method that mixes ultra-high-pressure water and abrasive materials. It utilizes the cutting energy of ultra-high-pressure water and abrasive materials without loss, achieving high cutting capability. The nozzle shape is compact, making remote cutting easy and allowing for use in various locations. 【Features】 ■ A cutting method that mixes ultra-high-pressure water and abrasive materials ■ Excellent cutting capability using the cutting energy of ultra-high-pressure water and abrasive materials without loss ■ A compact nozzle shape that facilitates remote cutting, making it suitable for various locations *For more details, please refer to the PDF document or feel free to contact us.
Difficult machining processes, such as cutting, are also possible! We specialize in fine precision machining with wire-cut oil processing.
At Okugi Manufacturing, we offer "precision wire cutting processing." Starting with metal press processing, we have been creating molds and conducting press processing for many years. Utilizing our mold processing technology, we specialize in ultra-fine and precision processing with wire cutting machines. We have extensive experience in mold component processing and fine product processing, and we possess various data. We can handle processing for watch-related modules below 0.1, difficult-to-process materials, and slit processing of approximately 0.035mm. [Features] ■ Specializing in fine precision processing with wire cutting oil processing ■ Extensive experience in mold component processing and fine product processing ■ Capable of processing difficult materials and slit processing of approximately 0.035mm *For more details, please refer to the PDF materials or feel free to contact us.
We are expanding the world of wire electrical discharge machining aimed at achieving a surface roughness of 0.5s for semi-mirror finishing.
With the introduction of the latest wire electrical discharge machining equipment, we are challenging ourselves to process with a wire diameter of 0.03 mm.
Outstanding reliability for machining applications! Achieving high rigidity and high productivity in inner diameter and end face grooving operations.
The "Sandvik Coromant CoroCut QI" is a tool for internal grooving and face grooving that employs a unique rail lock system to achieve high rigidity and high productivity. It enables low cutting resistance machining. The chip seat angle is designed to be flat for all chip seat sizes, allowing for low-resistance cutting that minimizes chatter compared to conventional products. 【Features】 ■ High chip mounting rigidity - Achieves exceptional machining reliability with outstanding stability in small diameter internal grooving and face grooving. ■ Optimized holder design - Realizes high rigidity and low cutting resistance machining. - Adopts HP (High Precision Coolant) system. - Compatible with various machine interfaces and machining applications. *For more details, please refer to the PDF document or feel free to contact us.
The cutting-through system significantly reduces processing costs! Dramatic improvement in yield.
The "Dorma Hyper Cut System" is an easy-to-handle, high-rigidity cobalt high-speed steel cutting system. Dorma high-speed tips and coated high-speed tips feature cutting edges on three corners, and the tip's end face is polished to a spherical shape. Additionally, the installation and replacement of the tips are very simple, allowing for high-precision positioning. 【Features】 ■ Quick change ■ No need for regrinding ■ Long lifespan ■ Reduced inventory ■ Stable repeat machining accuracy *For more details, please refer to the PDF document or feel free to contact us.
Precision parts processing and high technical skills!
We have equipped ourselves with the latest facilities necessary for precision machining, including a 5-axis machining center, wire processing, and grinding machines, enabling precision machining from 5 microns. Additionally, we can achieve high precision machining of complex-shaped products through hole drilling using wire cut processing, keyway machining, and 3D machining with the 5-axis machining center. With the know-how gained from years of experience in measuring instrument components, we can handle all types of parts machining.
In addition to press processing, we also incorporate technologies such as laser processing and wire cutting, and we undertake sheet metal work as well.
Our company can also perform wire cutting processing. If you are interested in wire cutting, please consult with us.
