heater Product List and Ranking from 474 Manufacturers, Suppliers and Companies

About Far Infrared: Regarding the Drying of Paint

We will introduce the reasons why drying paint is clearly faster in a far-infrared oven compared to a hot air oven!

AMK Co., Ltd. is a company that handles industrial far-infrared heaters, heating devices, and drying equipment. The drying and curing of melamine paint specifications require heating at 130°C for 3 minutes. However, with convection heating (hot air furnace heating), when the surface comes into direct contact with a 130°C atmosphere, the temperature of the paint surface rises rapidly, causing a film to form and trapping the internal solvent. As the temperature inside the paint rises, phenomena such as foaming and cracking occur due to solvent evaporation. To avoid this, the temperature must be gradually increased to 130°C, allowing solvent evaporation from the entire thickness of the paint film, which takes about 20 minutes until curing is complete. With far-infrared heating, without any setup, for example, in a heater furnace with a surface temperature of 500°C, the painted item reaches 130°C to 150°C in about 3 minutes. Even after removal, the hardness of the paint film and other qualities are often superior to those achieved with hot air heating. Far-infrared heating is very well absorbed by organic materials, allowing a large amount of energy to be absorbed at the paint surface, and the heat transfer to the interior of the paint film occurs almost instantaneously, resulting in the surface and interior of the paint film being nearly the same temperature. As a result, solvents are expelled from the entire paint film, preventing pinholes and cracks. *For more details, please refer to the PDF document or feel free to contact us.

Company：AMK
Price：Other

Other heaters
Heating device
Drying Equipment
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Talk about Far Infrared] Types of Far Infrared Heaters

Introducing various types of far infrared heaters, such as pipe-type and metal rod-type!

AMK Co., Ltd. is a company that handles industrial far-infrared heaters, heating devices, and drying equipment. Here are the types of far-infrared heaters: 【Types】 ■ Pipe-type heater A heater that has a coil-shaped heating element installed in the center of a ceramic pipe or a metal pipe coated with far-infrared radiation ceramic, used together with a reflector. ■ Metal rod-type heater A heater that has a metal tube (sheath heater) coated with far-infrared radiation ceramic, used together with a reflector. ■ Ceramic plate-type heater A heater that has a ceramic plate or metal plate coated with far-infrared radiation ceramic, capable of producing custom types from a single piece. ■ Ceramic cast-type heater A small ceramic heater made by placing heating wires in a mold, pouring in ceramic, and firing it. ■ Others There are also models that use gas or steam instead of electricity as the heat source, and steam models can be made explosion-proof. *For more details, please refer to the PDF materials or feel free to contact us.

Company：AMK
Price：Other

Other heaters
Heating device
Drying Equipment
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Discussion on Far Infrared: Methods and Features of Paint Drying

Introducing various methods and features of paint drying!

AMK Co., Ltd. is a company that deals with industrial far-infrared heaters and heating and drying equipment. The types of painting drying include drying after cleaning before painting, drying of solvents after painting, and curing after painting. Traditionally, hot air drying was the mainstream method, but recently, near-infrared and far-infrared have become more commonly used. Here are the characteristics of each type. [Types] ■ Hot Air Drying - A method that provides heat to the coating film through forced convection by exchanging air and heat with a heat source. ■ Near-Infrared Drying - Heating and drying using a short-wavelength heater equipped with a heat source such as a tungsten filament, with inert gas sealed inside a glass tube. ■ Far-Infrared Drying - Using a heat source with a wavelength of 3μ or more. *For more details, please refer to the PDF document or feel free to contact us.

Company：AMK
Price：Other

Other heaters
Heating device
Drying Equipment
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Guidebook for Introducing Infrared Heaters for Automotive Painting Drying

Solving the challenges of the painting drying process! What technology aims to improve equipment?

In the automotive industry’s painting process, high-quality finishes and efficient drying are essential. In particular, appropriate drying methods are crucial to maximize the performance of the paint and form a uniform coating. Conventional hot air drying ovens can sometimes present challenges such as uneven drying and poor energy efficiency. This guidebook explains the introduction of infrared heaters in the painting drying process and contributes to solving these issues. 【Usage Scenarios】 - Drying process for automotive body painting - Drying of painted bumpers and interior parts - Energy-saving measures for painting lines 【Benefits of Introduction】 - Reduced drying time - Improved drying quality - Lower energy costs

Company：エクセリタスノーブルライトジャパン
Price：Other

Hot air dryer
Drying Equipment
Other Auto Parts
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Drum can, pail can, and one-gallon can heating heater "RSD/RSDP type"

A heater that wraps around and heats the contents of a drum from the outside to facilitate easy removal.

The "RSD/RSDP type" drum, pail, and one-gallon can heating heater is designed to easily extract high-viscosity liquids and solidified materials from drums. By heating substances such as grease, asphalt, paint, wax, oil, varnish, chocolate, paraffin, and butter inside the can, the viscosity can be reduced, allowing for easier liquid extraction. This also minimizes the capacity required for the suction pump. 【Specifications】 ○ Complies with the Electrical Appliance and Material Safety Law (PSE) ○ The power cord is standard at 2 meters, with a plug (for single-phase 100V) ○ Can be easily installed with a one-touch fastening mechanism and fittings For more details, please contact us or download the catalog.

Company：日本ヒーター
Price：Other

Other heaters
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inline heater for air heating "SAT type"

It is an inline heater that heats air, gas, etc. flowing through the piping line.

By simply connecting to a JIS standard flange, it can be directly heated without changing the liquid flow path, allowing for a flow rate of up to 10m³/min. It can be easily integrated into existing piping, eliminating the need to establish a separate piping line, and can be used as an additional heat source for plant facilities. It is also usable outdoors.

Company：日本ヒーター
Price：100,000 yen-500,000 yen

Other heaters
Heating device
Heat exchanger
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Durable Material List

Corrosion resistance table for each heater element material and heated object.

Corrosion resistance table for each heater element material and the heated object.

Company：日本ヒーター
Price：Other

Heating device
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat calculation

Heater power calculation formula for heating gases, liquids, and metals.

Company：日本ヒーター
Price：Other

Heating device
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Jet Heater HR330H "BRITEII"

A general-purpose type that takes installation costs into consideration!

It can be used not only for outdoor and indoor heating but also for drying in construction site painting and concrete curing. It is also well-received as graduation commemorative gifts and PTA donations. It is a general-purpose type that takes into account the introduction cost. It comes standard with six types of safety devices and alarm monitors.

Company：TOEI KAISHA, LTD.
Price：Other

air conditioning
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Corner coil heater

Ideal as a gate bushing heater that is resistant to high temperatures and also strong against resin coating.

Compared to band heaters, it has a longer lifespan at high temperatures and excellent insulation properties. Since it makes surface contact with the heated object, the thermal efficiency is significantly improved. There are four types of sheath cross-sections: 4.1 square, 3.5 square, 2.5x4.0 rectangular, and 2x3 rectangular. The connection part with the lead wire is a non-heating section, making it less likely to break at the connection. It is also possible to incorporate a thermocouple (J or K).

Company：日本金型産業
Price：Other

Other heaters
Other molds
Plastic Mould
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ED3206565 TSH-9200

[End of Sale for This Period] Teknos TEKNOS TSH-9200 Series Heater 1200W Power Monitor White TSH9200

Company：イーデンキ
Price：Less than 10,000 yen

Other work tools
heater

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ED3166127 IFH-30TP

[Now accepting reservations] [Expected to arrive in mid-December] NakatomI NAKATOMI IFH-30TP Far Infrared Electric Heater IFH30TP

Company：イーデンキ
Price：10,000 yen-100,000 yen

Other work tools
heater

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ED1888904 NA-21SHZ-WR

Washable 100% cotton Made in Japan stepless temperature control winter warm cold

Subiyama Textile NA-21SHZ-WR Foot Heater Wine Red Heater Electric Foot Warmer for Feet, Abdomen, Hands, Knees, Thighs, Heating, Dust Mite Control, Room Temperature Sensor NA21SHZWR

Company：イーデンキ
Price：10,000 yen-100,000 yen

Other work tools
heater

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ED1550608 PH-800

TEKNOS PH-800 Parabolic Halogen Heater Floor Standing White PH800

Company：イーデンキ
Price：Less than 10,000 yen

Other work tools
heater

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-regulating heater cable KTV series with a maximum temperature of 150℃.

Process heating up to 150°C is possible! Intermittent operation is acceptable up to 215°C.

The "Self-Regulating Heater Cable KTV Series" is an electric heating cable for process insulation that can maintain a maximum temperature of 150°C. The heat resistance specifications of this product are 150°C for continuous operation and 215°C for intermittent operation. It can be used as an electric heating system in hazardous locations of Class 1 and Class 2 in Japan, not only in general areas exposed to acids, alkalis, and organic materials but also through the specific system configuration of KTV products and their associated components. 【Features】 ■ Capable of maintaining process insulation up to 150°C ■ Type approval system ■ Complies with JIS testing (JISC3651) 【Product Composition】 ■ Conductor ■ Fluoropolymer resin insulation spacer ■ Self-regulating heating element ■ Fluoropolymer resin insulation coating ■ Tin-plated copper braid (shield) ■ CT: Fluoropolymer resin outer layer coating *For more details, please refer to the PDF materials or feel free to contact us.

Company：西都電機
Price：Other

Other heaters
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Feature Introduction] SEITO Smart System 2

Flexible equipment changes! We will also reduce maintenance labor.

We would like to introduce the features of the "SEITO Smart System." This system is a high value-added temperature system created through know-how cultivated by high-quality products, technology, and achievements. Features include the safety of being grounded in case of an external injury, the ability to be layered, and the fact that heater maintenance is not required, among various other characteristics. 【Features】 ■ Grounded winding (ground fault measures in place) ■ No disconnections; low surface temperature ■ Maintenance-free ■ Smart system guarantee *For more details, please feel free to contact us.

Company：西都電機
Price：Other

Other heaters
heater

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Significant cost reduction! "Insulation Heater" *Examples of problem-solving included

A heating heater that can adjust its output according to the surrounding temperature! High quality and no maintenance required for the heater. Reducing costs by 90% to about 10 million per month.

Seido Electric provides safe insulation heaters (self-regulating heaters) that have a long lifespan, can adjust output according to ambient temperature, and can be used in hazardous areas. Since the temperature is maintained at the upper limit, it does not overheat and can provide uniform insulation. The insulation heater operates on electricity, so a boiler operator is not required. It offers significant cost advantages compared to hot water and steam, and has recently gained attention! [Challenge] A confectionery manufacturer reported spending 10 million yen per month to melt chocolate and jam, which is costly and requires a boiler operator. They requested to reduce costs, including labor expenses. [Solution] By replacing the existing hot water and steam systems with insulation heaters (self-regulating heaters), we achieved a 90% cost reduction. ↓ ↓ ↓ The heaters can operate 24 hours on electricity, requiring only the cost of the necessary energy, reducing the monthly cost from 10 million yen to about 1 million yen, which is roughly one-tenth of the usual cost. The absence of a boiler operator also significantly reduced expenses, much to their satisfaction.

Company：西都電機
Price：Other

Other machine elements
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reduce power consumption! Self-regulating 'pipe heater'

Variable heat output to optimize power consumption! This is a pipe heater that can be applied to complex shapes!

The "Pipe Heater" is an environmentally friendly heater for piping that does not waste water or energy. This system uses "self-regulating heating cables," which increase heater output at low temperatures, decrease heater output at moderate temperatures, and further reduce heater output to the minimum at high temperatures. The self-regulating feature prevents overheating and helps to reduce power consumption. 【Features】 ■ Self-regulating ■ Reduced power consumption ■ Low temperature = high heat output ■ Moderate temperature = low heat output ■ High temperature = minimum heat output *For more details, please refer to the PDF document or feel free to contact us.

Company：西都電機
Price：Other

Other machine elements
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-regulating tape heater industrial and consumer heat trace solution

Compared to conventional hot water and boiler heating, significant CO2 reduction is possible with self-regulating tape heaters. *There is a proven record of reducing costs to less than one-tenth annually.

The Auto Trace Heater (self-regulating tape heater) is a self-regulating heater developed by Reikem that operates in a parallel circuit. The heat trace solution is an auto trace (self-regulating) tape heater that provides insulation and temperature maintenance, created from the know-how cultivated through products, technology, and achievements. By switching from steam, it can reduce energy costs, achieving a reduction in maintenance and operating costs to less than one-tenth annually, and construction time to less than one-quarter. **Features of the Self-Regulating Tape Heater System:** - Output changes according to ambient temperature (self-regulating characteristics) - Long lifespan (countermeasures against aging degradation) - No maintenance required, etc. Due to the reliability and ease of installation of Reikem's Auto Trace Heater (self-regulating tape heater), it is widely used in various industries for process insulation and freeze prevention. This self-regulating tape heater has also been adopted by various electric power companies as part of energy-saving proposals. *For more details, please contact us or download the PDF.*

Company：西都電機
Price：Other

tank
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Collection of Solutions for Heater and Boiler Problems" is now available!

Reduce running costs by 90% with smart insulation! Instantly solve heater and boiler issues with labor-saving and energy-saving effects.

We often receive the following concerns from those using heaters and boilers: - The temperature doesn't rise... there are temperature inconsistencies... - The heater deteriorates quickly... - I don't want to do double installation... - Maintenance is difficult... For those facing such issues, we are offering a must-see collection titled "Solutions for Heater and Boiler Concerns"! [Contents Overview] ■ Common problems with heaters and boilers ■ Types of heaters ■ Case studies for problem resolution ■ Company introduction If you have any issues with heaters or boilers, please leave it to Saito Electric for proposals that can expect labor-saving and energy-saving effects, as well as reductions in carbon dioxide. We can provide solutions tailored to your company, as we can accommodate various types of heaters.

Company：西都電機
Price：Other

Other heaters
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multiple installation photos of the Auto Trace Heater!

Capable of a wide range from 65℃ to 235℃! This is a reliable, safe, and process heating auto-trace freeze prevention heater!

Even without using a thermostat, it prevents overheating and burning, ensuring reliable and safe freeze protection and process heating. It is an auto-trace heater that can be cut to the required length on-site. 【Self-regulating heater product list】 ■ Up to 65°C ・Self-regulating trace heater: BTV1-CT, -CR (100V) ・Self-regulating trace heater: BTV2-CT, -CR (200V) ■ Up to 110°C ・Self-regulating trace heater: QTV1-CT, -CR (100V) ・Self-regulating trace heater: QTV2-CT, -CR (200V) ■ Up to 120°C ・Self-regulating trace heater: XTV1-CT, -CR (100V) ・Self-regulating trace heater: XTV2-CT, -CR (200V) ■ Up to 150°C ・Self-regulating trace heater: KTV1-CT, -CR (100V) ・Self-regulating trace heater: KTV2-CT, -CR (200V) ■ Up to 235°C ・Self-regulating trace heater: VPL1-CT (100V) ・Self-regulating trace heater: VPL2-CT (200V)

Company：西都電機
Price：Other

Other heaters
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Raychem self-regulating heater

We are the official primary distributor of Reikem and handle various heaters from Reikem. We support energy savings and cost reduction, accommodating a variety of heaters!

Our company serves as an authorized sales and engineering agent for Raychem's self-regulating heaters (auto-trace heaters), supporting energy-saving, cost-reduction, and CO2 reduction for systems. The Raychem brand is recognized for its technical leadership as the inventor of self-regulating heating cables. Additionally, Raychem's cables adjust their output according to surrounding and process conditions, accurately delivering the necessary amount of heat to the required location at the right time, making them suitable for heat management systems. 【Features】 ■ Authorized primary engineering agent for Raychem, handling self-regulating heaters and more ■ Supporting energy-saving, cost-reduction, and CO2 reduction for systems *For more details, please refer to the PDF materials or feel free to contact us.

Company：西都電機
Price：Other

Other heaters
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reikem's self-regulating heater for warming pipes

Reikem is top-class in the world! It is Reikem's self-regulating pipe heater that can warm pipes with low power consumption by running a heater alongside them.

Our company is a licensed sales and engineering agent for Raychem's self-regulating pipe heaters (auto-trace heaters), supporting energy-saving, cost-reduction, and CO2 reduction for pipe and tank heating systems. The Raychem brand is recognized for its technical leadership as the inventor of self-regulating heating cables. Additionally, Raychem's pipe heater cables adjust their output according to surrounding and process conditions, accurately delivering the right amount of heat to the necessary location at the required time, making them ideal for pipe and tank heat management systems. 【Features】 ■ Authorized primary engineering agent for Raychem, handling self-regulating pipe heaters and more ■ Supporting energy-saving, cost-reduction, and CO2 reduction for pipe and tank heating systems *For more details, please refer to the PDF document or feel free to contact us.

Company：西都電機
Price：Other

Other heaters
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ideal for adhesive process insulation! 'Self-regulating heater'

Attention those struggling with adhesive curing! This is a self-regulating heater that can maintain a constant temperature for liquids 24 hours a day, 365 days a year.

During cold periods such as winter, it is common for adhesives to harden. In the case of boilers, startup losses occur after breaks. Self-regulating heaters can be left unattended 24 hours a day, 365 days a year, so they are recommended for preventing hardening. They can evenly and permanently warm adhesives without any unevenness. The equipment cost is also one-third that of a boiler, which helps reduce costs, making them increasingly popular recently! Self-regulating heaters are electric systems, making them suitable for CO2 reduction and energy saving as part of SDGs initiatives. *For more details, please download the PDF.

Company：西都電機
Price：Other

Other machine elements
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High heat-resistant, thin custom-made heating element "Polyimide Film Heater"

Custom-made polyimide heaters with excellent high heat resistance! Featuring an ultra-thin design that can be applied to curved surfaces, suitable for various applications in medical, semiconductor, automotive, and agricultural fields.

Polyimide heaters are heating elements that are thin, highly heat-resistant, and flexible. They use polyimide film as an insulator, demonstrating excellent heat resistance. Additionally, due to special processing, they can provide uniform heating over a wide area as planar heating elements. 【Features】 ■ Excellent high heat resistance that withstands harsh temperature environments ■ Extremely thin and flexible, perfectly fitting curved surfaces and tight spaces ■ Achieves a wide and uniform temperature distribution, enabling consistent heating ■ Custom-designed to suit applications in terms of size, shape, and power ■ For more details, please refer to the catalog or contact us directly.

Company：シンワ測定ＦＥ部
Price：Other

Other heaters
Surface treatment contract service
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Custom-made to accommodate various shapes! Thin and flexible surface heater.

With high insulation and durability, it fits perfectly in narrow spaces and curved surfaces. A custom-made polyester heater that meets your needs.

Polyester heaters are thin and flexible heating elements suitable for heating curved surfaces and narrow spaces. They use polyester (PET) film as an insulating material, combining high insulation properties and durability. We can achieve a heating distribution tailored to your preferences and design and manufacture it custom-made. 【Features】 ■ Thin and soft, making it perfect for fitting into small spaces and curved surfaces ■ Uses polyester (PET) film as an insulating material, providing high insulation and durability ■ Custom-designed and manufactured to meet specific needs ■ The circuit is formed by etching, allowing for the intended heating distribution by the designer *For more details, please download the catalog or contact us directly.

Company：シンワ測定ＦＥ部
Price：Other

Other heaters
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-efficiency thin polyimide heaters supporting manufacturing sites.

Film heaters that lead to stable operation of insulation, drying, and processing processes for various devices.

Shinwa's "Polyimide Heater" is a thin film heater that plays a vital role in temperature control for industrial equipment and production lines. It is easy to integrate into machinery and enclosures, achieving efficient heating while minimizing heat loss. 【Features】 ■ Freely designed to match the shape of the device ■ Stable heating from low to high temperatures ■ Improved processing quality through uniform heating ■ Energy-efficient structure ■ Reduced maintenance burden *For more details, please download or feel free to contact us.

Company：シンワ測定ＦＥ部
Price：Other

Other heaters
Surface treatment contract service
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-reliability film heater suitable for precision electronic devices.

Thin, lightweight, and reliably generates heat. This slim heater utilizes temperature control technology that supports the performance of electronic devices, effectively functioning even in limited spaces.

Shinwa's "Polyimide Heater" is designed for heat control in limited spaces such as inside OA equipment and PCs. Its thin film structure achieves both lightweight design and stable heating. 【Features】 ■ Ideal for internal heating of copiers and printers ■ Lightweight, ensuring design flexibility for equipment ■ Rapid heating for optimized thermal efficiency ■ Long lifespan and high reliability design ■ Low power operation reduces environmental impact *For more details, please download or feel free to contact us.

Company：シンワ測定ＦＥ部
Price：Other

Other heaters
Surface treatment contract service
heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

heater Product List and Ranking from 474 Manufacturers, Suppliers and Companies | IPROS GMS

heater Manufacturer, Suppliers and Company Rankings

heater Product ranking