Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
121～150 item / All 1464 items
It is a lens with cylindrical lenses arranged on a plane.
It is used in stereoscopic photographs, stereoscopic images (3D images, three-dimensional images), screens, etc. The lenticular lens products made from special optical resin in Japan can manufacture various sizes and shapes of lenticular lenses according to customer requests, in addition to standard specifications. For more details, please contact us or refer to the catalog.
Achieving a φ0.35 glass molded aspheric lens.
Features of SUMITA's Precision Glass Mold Lenses: - Support for small lot production - Low cost - High precision - Support available from optical design - Prototype lenses available
A lens for image analysis with deep focal depth and distortion-free. We offer a wide range, including large-diameter lenses such as φ300mm.
The telecentric lenses VISIONMES from Carl Zeiss Jena in Germany offer a wide range of sizes, from lens diameters of φ8mm to φ300mm for large-diameter lenses. With distortion-free lenses, they enable measurement accuracy of 1μm and can be connected to various CCD cameras. Additionally, Carl Zeiss Jena consistently responds to user specifications. 【Features】 ■ Deep depth of field with constant magnification within that range ■ No image distortion due to parallax ■ Combined use with telecentric lighting allows for stable images of flat mirror-like workpieces ■ Significantly improves measurement accuracy for the shapes of deep components *For more details, please download the materials or contact us.
Manufacturing from just one piece, even outside of standard products! Featuring the "POLAX series" and "RETAX series" in our lineup.
This catalog introduces optical filters that are made by sandwiching our high-performance films with glass. It features iodine-based polarizers from the "POLAX series," as well as wavelength plates from the "RETAX series" that achieve specific phase differences when linear polarized light is incident, and ultra-broadband wavelength plates "SB-RETAX." Our company has over 50 years of experience in optical film manufacturing and adhesive technology developed since our founding, allowing us to provide a consistent system from development and design to manufacturing and sales. [Contents (excerpt)] ■ About Light ■ Lokeo's Optical Filters ■ Polarizers POLAX Series ■ Wavelength Plates RETAX Series ■ Ultra-Broadband Wavelength Plates SB-RETAX *For more details, please refer to the PDF document or feel free to contact us.
Laminating resin films with birefringent properties! They are bonded between substrates with excellent optical characteristics.
The "SB-RETAX" is a wavelength plate that, when linear polarized light is incident, provides a continuous and constant phase difference over a wide wavelength range. It is constructed by laminating a resin film with birefringent properties between substrates with excellent optical characteristics. Depending on the wavelength range in which the effect is obtained, there are differences in the number of film layers, available in two types: 3 layers and 5 layers. 【Features】 ■ Provides a continuous and constant phase difference over a wide wavelength range ■ Custom products - In addition to standard products, we can consider specifications such as substrate material, shape, size, and thickness according to your requirements - Since it uses resin film, it can accommodate larger sizes of Φ30 or more - Even if the wavelength range is changed, production is possible starting from the optical design of the film *For more details, please refer to the PDF document or feel free to contact us.
Laser objective lens
NUVPlan20X・・・WD12mm、N.A. 0.5 NUVPlan50X・・・WD10mm、N.A. 0.52
5-megapixel camera compatible telecentric lens
This is a telecentric lens compatible with 2 to 5 million pixel cameras. It is ideal for capturing images with a wide field of view and for high-precision alignment.
Line sensor camera compatible telecentric lens SVL series
Supports a maximum element length of 64mm. It is also compatible with coaxial reflection, making it ideal for capturing patterns on glass substrates and mirror surfaces.
Near-infrared objective lens for photoemission
It is a long working distance, high-resolution objective lens designed with a high spectral transmittance in the near-infrared range.
Optimal for device embedding!
Infinite design, compact tube with a 200mm tube lens.
Ideal for observing the back surface of wafers! It features a long working distance and high-resolution objective lens.
The "PE lR Plan Objective Series" is a long working distance, high-resolution objective lens designed for high spectral transmittance in the near-infrared range. It can be used to observe the backside of wafers by transmitting through silicon, or as a lens for photoemission failure analysis. When mounted on our microscope "PS-888L" and used in conjunction with a YAG laser, it can also be utilized for laser repair, among other applications. *It is compatible with LCD glass correction and silicon correction, so please feel free to consult us. 【Features】 ■ Lens for photoemission ■ Long working distance, high-resolution objective lens ■ Usable for laser repair and more *For more details, please refer to the catalog or feel free to contact us.
Ideal for use with white light interferometers! Interference fringes that accommodate the height differences of the sample can be obtained.
The "MlF Series" is an objective lens designed for use with white light interferometers. Interference fringes corresponding to the height differences of the sample can be obtained through the built-in beam splitter and reference mirror along with the sample image at the focus position. For custom-made products, we will manufacture them after consulting on aspects such as the presence of a shutter and the adjustment method for the reference mirror. We can also provide reference mirrors with reflectivity tailored to the target object. 【Features】 ■ Built-in beam splitter ■ Accommodates height differences of the sample ■ Custom manufacturing available *For more details, please refer to the catalog or feel free to contact us.
Long working distance objective lens ideal for thin film processing such as semiconductor circuits and LCD repairs.
The "UV/DUV Plan APO20X・50X" is a long working distance objective lens for bright field observation. It is corrected to focus at wavelengths used in the visible range and near ultraviolet. Designed with high spectral transmittance in the near ultraviolet region, it is optimal for thin film processing such as semiconductor circuit and LCD repairs when used with a microscope and YAG laser. 【Features】 ■ For bright field observation ■ Designed for high spectral transmittance ■ Ideal for thin film processing *For more details, please refer to the catalog or feel free to contact us.
It demonstrates its power in detecting extremely weak light emissions caused by current leakage during fault analysis.
The "PElR2000HR 20X・50X" is an objective lens that maintains over 80% transmittance at 2000nm. It demonstrates its power in detecting extremely weak emissions caused by current leakage in semiconductor device failure analysis. It allows observation of highly integrated, multi-layered semiconductor devices through infrared light that passes through the silicon from the back of the chip. *Silicon correction is available, so please consult us. 【Features】 ■ Maintains over 80% transmittance at 2000nm ■ Effective in detecting extremely weak emissions ■ Silicon correction available *For more details, please refer to the catalog or feel free to contact us.
High-resolution telecentric lens compatible with CMOS sensors with pixel sizes of less than 3μm.
C-mount 1.2-inch high-resolution design compatible with CMOS sensors with pixel sizes less than 3μm. WD65mm series announced with 0.5x, 0.69x, 1x, and 2x options.
High-quality IR lens molded in one piece using high-quality chalcogenide glass and advanced glass molding technology.
LightPath's IR lenses have significantly improved performance due to the recently developed Molded BD6TM glass material. This revolutionary IR lens serves as an alternative to traditional expensive diamond-cut IR lenses (Si, Ge) and features enhanced thermal properties. In particular, the long focal length high-sensitivity type is expected to be applied in sensors, such as for enhancing vision in autonomous vehicles, thermal imaging cameras, and thermal eyes. There is also potential for use in unmanned aerial vehicles (drones) and other applications.
A circular 20W fluorescent lamp is used as the light source, making it possible to ensure sufficient illumination on the work surface.
● By using a circular 20W fluorescent tube as the light source, it is possible to ensure sufficient illumination on the work surface. The lighting method employs an inverter circuit board, which suppresses the characteristic "flicker" of fluorescent tubes. ● The compact body and arm shape allow for installation in various locations.
XF-PTL12257-M72-11.48-VI
8K line scan (57.4mm) telecentric lens
Improved efficiency in the inspection of parallel plane glass and prisms! Compact and cordless, allowing for easy and quick measurements anywhere!
The "HAC-1" is a handheld autocollimator capable of measuring the parallelism deviation of parallel plane glass and the deviation from the reference of prisms. It allows for quick assessment of the quality of parallel plane glass and prisms. By enabling simple inspections during the polishing process, it can improve work efficiency. Weighing 450g, it is a cordless handheld type that allows for measurements on-site. By attaching a tripod, inspections can be conducted quickly with both hands anywhere. It features a high-brightness LED and a semi-transparent chart, making the scale easy to read. The use of a hairpin-shaped chart facilitates the distinction between surface reflection and back reflection. 【Accessories】 ○ Tabletop tripod ○ Objective lens aperture ring 【Features】 ○ Easy and simple, allows for on-site measurements ○ Cordless type (uses AA batteries) ○ Parallelism measurement ○ Distinction between surface reflection and back reflection ○ Simple inspections possible during work ○ Length: 28.5 cm ○ Weight: 450 g ● For more details, please contact us or refer to the catalog.
Various benefits such as reduced machining time, smooth cutting surfaces, decreased residual material, and cost savings on tools with CAM compatible with elliptical ball end mills!
Supports major ultra-precision machining tools such as aspheric machining machines and freeform surface machining machines, and allows for calculations with the tool axis tilted (angle can be specified arbitrarily). Paths are calculated directly from mathematical formulas, enabling accurate data output at the specified precision. Compatible with ball end mills, wheels, and bits, and can also calculate paths for tool shapes expressed with arbitrary curves through customization. In light guide plate processing, linear groove machining compatible with linear Fresnel and straight grooves, as well as turning groove machining compatible with Fresnel shapes and cylindrical groove shapes, have been added. It is also equipped with differential calculation and shape correction functions. While confirming with 3D graphics, it supports editing of measurement data and partial correction processing. Basic post data for standard axial configurations is included. Since axial directions and address characters can be set arbitrarily, it can accommodate special axial configurations.
Observe fluorescence using your optical microscope!
Even if a fluorescent module cannot be installed, fluorescence observation is possible if a dedicated objective lens for the LUMINTM illuminator, which emits excitation light from an LED light source, can be attached. Additionally, the dedicated objective lens and illuminator are connected by magnets, making attachment and detachment very easy. 【Features】 ■ Can be installed on most microscopes. ■ No darkroom is required for observation. ■ Emits safe light that does not expose harmful UV light (490/510nm). ■ The illuminator unit operates on standard power or batteries. ■ LED bulb lifespan is approximately 50,000 hours. ■ The magnification of the dedicated objective lens is 20x, 40x, 60x, 100x (oil immersion). *For more details, please download the PDF or contact us.
Design optimized for SWIR imaging.
Lenses that can be used for various applications such as electronic circuit board inspection, monitoring, short-wavelength infrared spectroscopy, anti-counterfeiting, and process quality control.
Shibuya Optical offers a variety of objective lenses.
We offer a variety of high cost-performance products as standard items and can respond to requests for short delivery times. We also provide custom products, which are typically expensive from major optical manufacturers, at reasonable prices. Please feel free to consult us about the design of the entire system, including lighting.
Compact, lightweight, and cost-effective microscope unit.
● Microscope Unit SPA A compact, lightweight, and cost-effective microscope unit. ● Microscope Unit SPA-IR (for infrared) The "SPA-IR," an optimal unit for observing in the infrared range, is now available as a new product. ● Microscope Unit SPA-Z (with zoom function) A compact zoom microscope unit that can accommodate infinity-corrected objective lenses. Ideal for integration into devices and use in confined spaces. ● Microscope Unit SPA-L (for laser processing) A compact, lightweight, and cost-effective microscope unit. A new product that can accommodate a YAG laser is now available.
Achieve high-precision, real-time angle measurement with a single sensor! The palm-sized angle measuring device has a long operating range and increased layout flexibility.
The "Smart LAC Series" is a non-contact angle measuring device that can determine the tilt of a surface in real-time. It employs the "laser autocollimator method," which projects a laser beam onto the target object and calculates the tilt of the surface from the angle of the reflected light. With a single sensor, it can measure minute angles and the angular relationships of multiple workpieces, achieving low cost and space-saving design. Depending on the application, you can choose between "single spot measurement," which allows you to select any one point from multiple light spots, and "multi-spot measurement," which enables simultaneous measurement of up to five light spots and measurement of the angle differences between them. ★ We are currently offering basic knowledge materials that explain the fundamental principles and features of laser autocollimators. You can view them immediately via PDF download. 【Features】 ■ Long working distance (measurement range ±0.5 degrees at W.D. 300mm) ■ High precision and high resolution ■ Selectable wavelengths from red, green, blue, and infrared ■ Capable of measuring the angle of external incident light ■ No need to prepare multiple sensors, saving space and cost *Demo units are available for loan. If you are interested, please feel free to contact us.
Train door opening and closing solenoid; electron microscope lens.
We will finish the product so that it can be used even under harsh conditions through vacuum resin molding.
World's first transparent adaptive lens
A compact adaptive lens with a transmissive design. It has a proven track record within high-power laser systems, enabling not only the minimization of focal size through wavefront correction but also passive wavefront control. For more details, please contact us or download the catalog.
