Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
151～180 item / All 244 items
You can evaluate the performance of audio signal processing under reverberation simulation.
3PASS reverb is an option for 3PASS lab and 3PASS flex. As an extension of 3PASS lab and 3PASS flex, it simulates the reverberation of a single speaker at the microphone position of the device under test. 3PASS reverb supports measurements compliant with ETSI TS 103 557.
We will simulate the stability of the power supply.
When the switching current that changes instantaneously increases, the power supply voltage and ground fluctuate due to the impedance of the power supply. At Towa Electronics, we reduce the impedance of the power plane during the component placement stage to ensure stable operation of the LSI. At Towa Electronics, we can provide total product development services, not only in circuit design and software design but also from substrate design based on that design to component procurement and assembly. For more details, please feel free to contact us.
We propose a layout from the perspective of substrate manufacturing and component mounting!
We conduct simulation analysis using Hyper Lynx SI (Signal Integrity). We compile component selection and simulation results into a report for proposals. We respond to customer requests in various ways, such as analyzing propagation delay and overshoot/undershoot in waveform reflections, and analyzing the levels of noise received from and given to adjacent signals. 【Simulation Analysis】 ■ Reflection: Analysis of propagation delay and overshoot/undershoot in waveform reflections ■ Crosstalk: Analysis of noise levels received from and given to adjacent signals ■ S-Parameters: Verification of losses at operating frequencies using the S-parameters of transmission lines ■ EYE Pattern: Checking the opening of the EYE ■ Timing: Verification that propagation delay does not pose timing issues *For more details, please refer to the PDF document or feel free to contact us.
It is an NC data (G-code) simulator boasting achievements in the global aircraft and automotive industries. It supports multi-axis machining, composite machine tools, and special machinery.
ICAM Technologies' control emulator is a simulator that reads NC data from various axis configurations, multi-control systems, 5-axis machining centers, and hybrid lathes (mill-turn) to prevent errors in the actual work environment in advance. It has the following features: - Function for creating specifications for control devices - Support for individual program formats - Confirmation of over-travel using Virtual Machine - Cutting simulation (checking for over-cutting/under-cutting) - Interference checks for machines/tools/parts - Fully integrated with CAM-POST - Provides a single workbench environment for PSE (Post-processing/Simulation/Emulation).
You can feel the differences in piping temperatures in each section and the principles that create "warm air" and "cold air"!
The "RTCS-02" is an educational refrigeration cycle simulation that allows you to learn the principles and mechanisms of refrigeration and air conditioning. The compressor, condenser, evaporator, and other components are arranged in a compact tabletop frame with a layout that is easy to see and understand. By operating the fan motor with the control unit's switch and opening and closing the valves in the piping, you can simulate air conditioning failures and observe changes in pressure with the built-in gauges. 【Features】 - Experience the differences in piping temperatures and the principles behind the creation of "warm air" and "cold air" by actually running the system. - Simulate air conditioning failures. - Observe changes in pressure with the built-in gauges. - Conduct education on tables or workbenches in conference rooms or training rooms. *For more details, please refer to the PDF materials or feel free to contact us.
We are utilizing cutting-edge systems such as 3D robot simulation and FEM analysis to improve productivity and quality.
【3D Robot Simulation】 - CATIA DELMIA FAST CURVE - FANUC ROBO GUIDE - Yaskawa Electric MOTO SIM A diverse group of engineers, from skilled professionals to young talent, provides stable quality and the latest technology. Leave everything from design to simulation, analysis, and robot teaching to us. *We have released simulation analysis videos on our website. Please take a look. http://www.yanagita-iw.jp/analysis/
Verify NC data before processing with machine tools! It is also possible to reduce processing load.
"VERICUT" is a simulation software that can reproduce machining processes in the same way as machine tools, based on NC data created by CAM software. Before machining with a machine tool, NC data can be verified to ensure there are no issues, allowing for processing to be done with confidence. Additionally, by using optimization software in conjunction, it is possible to shorten cycle times and reduce machining loads. 【Product Composition】 ■ Verification ■ Machine Simulation Function ■ Multi-Axis (Multi-Axis Module Function) ■ Auto Diff (Comparison Inspection Function) ■ OptiPath (NC Program Optimization) *For more details, please refer to the related links or feel free to contact us.
![Cutting Simulation [AdvantEdge]](https://image.mono.ipros.com/public/product/image/02f/2000326997/IPROS99523012225943914867.jpeg?w=280&h=280)
Industry-standard cutting process simulation program
Based on past experiences, improvements and developments in cutting processes can be effectively and efficiently addressed by visualizing cutting phenomena from a different perspective using AdvantEdge FEM for simulation. AdvantEdge FEM is equipped with a finite element method-based analysis engine that condenses the latest technology with the following features: - 2D (turning) and 3D cutting - Fully automated mesh generation - Fully automated suitable remeshing - Reproducibility of shear zones - Thermal and structural coupling calculations - Consideration of heat and inertia for workpieces and tools - Consideration of contact and heat conduction between workpieces, tools, and chips - Accurate reproduction of coatings and cutting edge shapes - Calculation of temperature distribution during steady cutting in steady-state analysis
![Effective Utilization of Cutting Simulation [AdvantEdge]](https://image.mono.ipros.com/public/product/image/e21/2000506785/IPROS80262050943195009551.jpeg?w=280&h=280)
You will acquire the skills to create simulation models, evaluate and analyze results, and lead to solutions for challenges. *Simulation examples are currently available in video format!
By visualizing processing phenomena, we prevent machining troubles. 1. About AdvantEdge 2. Exercise 1 – Confirming operation methods in 2D cutting 3. Exercise 2 – Importing 3D CAD data 4. Exercise 3 – Throwaway milling 5. Exercise 4 – Solid drilling 6. Exercise 5 – Turning 7. Exercise 6 – Solid end milling 8. Case studies of cutting simulation analysis using AdvantEdge Other (user success stories, seminars related to cutting processing, etc.) We encourage users who are newly tackling challenges in cutting simulation to participate. We also provide advice on model creation tailored to specific challenges.
New Approach for Utilizing Cutting Simulation
☆Date: November 7, 2024 (Thursday) 15:00–16:00 (Reception starts at 14:30) ☆Venue: Tokyo Big Sight, Room 607 JIMTOF Exhibitor Workshop ☆Cost: Free ☆Capacity: First come, first served (Entry may be limited due to the number of seats in the conference room. Please arrive early.) ☆Program Overview ■Introduction of tool models into AdvantEdge and case studies from overseas technical centers Mitsubishi Materials Corporation ■Case study on the use of AdvantEdge in the development of the new product GREEN TAP OSG Corporation ■New approach for utilizing cutting simulation Itochu Techno-Solutions Corporation
By quickly verifying the implementation and validity of the algorithm, we can accelerate feedback on the verification and shorten the development period.
In the Systems Engineering (SE) process, procedures are established for each subsystem and component, and the validity confirmation and verification are repeatedly conducted at each stage (requirements analysis, functional analysis, and overall architecture decision). By utilizing simulations, we accelerate the rapid implementation of algorithms and the feedback for validity confirmation and verification, reducing rework caused by deficiencies in specifications, while also supporting the reduction of development time from architecture consideration to design and verification. At Mobile Tech, we provide the construction of system-level simulation models that meet the design phase and requirements process.
Over 140 rich achievements in commissioned research and development!
At TS Technology Co., Ltd., we provide molecular property analysis, reaction design, and chemical synthesis support through theoretical calculations and computer simulations. Our simulations primarily enable thermodynamic analysis, property analysis screening, and reaction analysis. Additionally, we offer a robust research contracting system, including quick orders (contract calculations), comprehensive business contracts, and full orders (contract research and development). 【Supported Items】 ■ Thermodynamic Analysis ■ Property Analysis Screening ■ Reaction Analysis *For more details, please download the PDF or feel free to contact us.
![[Accident Prevention and Process Improvement] NC2 Axis Lathe Processing Simulation](https://image.mono.ipros.com/public/product/image/71a/2000710089/IPROS02673968063735553723.png?w=280&h=280)
Faithfully represent the virtual cutting edge trajectory and cutting shape with nose R correction.
"NCVIEW TURNwatch" is a simulation software that reproduces the NC program processing of machine tools, helping to prevent accidents and improve productivity. As a solid simulator for 2-axis lathe processing, it allows you to check tool shapes, tool paths, and the cutting shapes of workpieces as standard. It supports nose R correction, enabling accurate representation of even the smallest differences between the virtual cutting edge trajectory and the cutting shape. You can expand functionality by adding options to the main unit (basic module). Since the workpiece fixture also becomes a rotating body during turning, interference checks can be performed according to stationary and turning conditions through the optional tool and holder interference check. 【Benefits of Implementation】 ■ Realization of safe processing without accidents ■ Reduction of wear on machines, tools, and materials ■ Improved machine operating rate without the need for dry runs ■ Enhanced quality and work efficiency ■ Safe training ■ Accurate support unique to domestic software *For more details, please download the PDF or contact us.
The economic loss during the main axis repair period is significant... Mechanical structure simulation will be helpful!
When tool or holder interference and structural interference occur, it can even damage the spindle. The spindle is a crucial component that determines machining accuracy, making it one of the troubles we particularly want to avoid in machining accidents. Repair costs are high, and during the repair period, the machine cannot operate, resulting in significant economic losses. The 'NCVIEW' machine structure simulation is helpful for checking interference of the spindle and table, as well as for checking axis stroke over. [Causes of Trouble] ■ Tool or holder interference, structural interference → Can even damage the spindle ■ Repair costs are high, and during the repair period, the machine cannot operate, leading to significant economic losses. *For more details, please refer to the PDF document or feel free to contact us.
For those struggling with cost reduction in mass production of tapped press-processed parts. We contribute to savings with our tap-integrated molds!
We would like to introduce the tap processing built-in mold simulation that we are conducting. For a standard mold, the mold cost is 3,000,000 yen, and there are 2 dedicated tap machines. The press processing cost is 3.00 yen, and the tap processing cost is 5.00 yen, resulting in a total of 8.00 yen × 100,000 units/month, which amounts to 800,000 yen/month. For the tap built-in mold, the mold cost is 4,500,000 yen, and since the tap dedicated machines are built-in, there are 0 units. The tap processing is included in the press processing cost, which is 3.00 yen × 100,000 units/month, resulting in a total of 300,000 yen/month. This results in a difference of 500,000 yen/month, allowing for a reduction of 1,500,000 yen over 3 months. After 3 months, there will be a monthly saving of 500,000 yen compared to the standard mold. This is just an example. In reality, we will conduct a thorough hearing and provide a quote. *For more details, please refer to the PDF document or feel free to contact us.
Experienced engineers will report the necessary analysis results and methods to our customers. Why not focus on your core business and make effective use of your time?
A-Tech Co., Ltd. offers "numerical analysis and simulation" services. There is a saying that time is money, but numerical analysis work, which ensures the safety of design and the validity of research and development, requires a tremendous amount of time and effort. Our company provides clients with the necessary analysis results and methodologies through experienced engineers. Additionally, we propose suitable data management through collaboration with system development. [Services Offered (Partial)] ■ Structural Analysis (Stress, Deformation) ■ Analysis Code Development ■ Mechanism Analysis ■ Fluid Analysis ■ Heat Transfer Analysis, etc. *For more details, please refer to the PDF document or feel free to contact us.
3D simulation of AquaNet analyzing space.
Our company can create 2D floor plans and cross-sectional views using the high accuracy of 3D point cloud data. The reading range of our 3D scanner is approximately 500 meters, allowing for a comprehensive reproduction of structures as a whole. Additionally, changes in structures can be checked and measured from 360°. 【Features】 ■ Reproduction: Accurately reproduce the current state of buildings and structures, etc. ■ Measurement: High precision calculation of distances across a wide range of 3D data, etc. ■ Analysis: Contour line analysis is possible from 3D terrain data, etc. *For more details, please download the PDF or feel free to contact us.
-oT-Sim : dynamic scenarios of HDR simulated virtual scenes (verifiable luminance and color values)
-oT-Sim (dynamic scenarios of Optical Brightness Simulation) is a road traffic driving environment simulation (Unreal Engine-based) for autonomous driving verification and advanced safety lamp function verification, incorporating our optical expertise and verification processes. oT-Sim can be used standalone or in combination with our oT-Analyser to perform optical verification and visibility/ readability verification of lighting equipment, such as headlights, taillights, and interior displays. Based on over 20 years of practical experience in high-standard road design, we also possess unique real world road generation know-how that offers excellent cost-effectiveness, and provide real-road 3D models for verification purposes. We can also provide nighttime driving road scenes that are optically verifiable, with dynamic range over those captured by in-vehicle cameras.
Introducing a method to predict wind direction and speed, and to verify the occurrence of building wind damage!
We use a general-purpose 3D fluid analysis software to predict wind environments, analyzing a range with a radius of approximately three times the height of the planned building. This method allows for evaluations at a lower cost and in a shorter time compared to traditional wind tunnel testing methods. We offer "Wind Environment Simulation" for predicting wind damage related to environmental assessments and wind predictions associated with condominium construction, as well as "Wind Power Environmental Simulation" for predicting noise, low-frequency sound, and shadow effects related to wind power plant environmental assessments. Please utilize these for environmental assessment materials or as reference materials during the design phase. 【Features】 <Wind Environment Simulation> ■ Wind damage prediction related to environmental assessments ■ Wind predictions associated with condominium construction ■ Wind environment simulations tailored to customer needs *For more details, please refer to the PDF materials or feel free to contact us.
We offer analysis and consulting using specialized software!
Our simulation service offers analysis and consulting using dedicated software. Simulation is a method that prepares a device that "mimics" real-world problems, conducts experiments using that device, and analyzes and predicts the outcomes. Simulation is effective when the problem (system) is complex and difficult to predict, or when testing on the actual system would be too time-consuming or costly. 【Effects of Simulation】 ■ Decision Making ■ As part of Presentations ■ Education and Training during System Operation *For more details, please download the PDF or feel free to contact us.
By creating and simulating virtual equipment, we quickly provide services such as identifying challenges in equipment implementation and examining feasibility.
Since our establishment, we have introduced 3D-CAD (SolidWorks) to improve the quality and efficiency of equipment manufacturing. To maximize the advantages of 3D drawings, we have also implemented 3D simulator software and a VR environment. This allows us to animate conceptual drawings created with 3D-CAD and enables users to experience the equipment in a virtual space. By creating and simulating virtual equipment according to customer requests, we can quickly provide detailed services such as identifying challenges in equipment implementation and examining feasibility.
Experience the size and usability of the actual machine using VR (virtual reality) before actually producing it!
At Mos Corporation, we have introduced 3D simulator software and VR environments that enable real machine experiences using VR during the production of labor-saving devices and robots. Before actually starting the device production, we allow clients to interact with the conceptual designs in a virtual space, enabling them to experience the equipment and identify challenges and feasibility issues related to equipment introduction, thus providing prompt and detailed services. By drawing 3D models from the detailed design phase (technical) to the conceptual consideration phase (sales), we strengthen the front-loading system and derive the "optimal solution" for devices together with our customers. Please leave the design and production of automation devices, equipment, and robots to us! 【Features】 ■ Share images with moving conceptual designs ■ Conduct cycle time verification and interference checks at the conceptual stage ■ Forecast production resource utilization rates and confirm coordination with upstream and downstream processes ■ Verify real machines using VR (virtual reality) *For more details, please refer to the PDF materials or feel free to contact us. *If you wish to view the video, please click the URL below!
Establishing a new standard for functionality, performance, and design! A system equipped with careful maintenance.
Our company offers a wide range of environmental testing systems and equipment. We provide solutions in various sizes suitable for tests such as temperature, weather, vibration, corrosion, emissions, altitude, pressure, and combined stress. From product series to custom solutions and process-integrated systems, please choose for excellent reproducibility and precise test results. Additionally, our systems establish new standards for functionality, performance, and design, featuring advanced design, careful assembly, and meticulous maintenance. 【Products Offered (Excerpt)】 ■ Constant temperature testing equipment for battery testing ■ Constant temperature (constant humidity) testing equipment "LabEvent" ■ Constant temperature testing equipment for EMC testing "LabEvent EMC" ■ Constant temperature (constant humidity) walk-in chamber "ClimeEvent" ■ Thermal oven "HeatEvent" *For more details, please refer to the PDF materials or feel free to contact us.
Firefighting activity simulation based on our plant layout! A practical simulation training tool.
At FPEC Corporation, we conduct "Plant Disaster and Disaster Prevention Simulations" based on our own plant layout, including fire-fighting activity simulations. By simulating various fire scenarios such as changes in wind direction and speed, it can be utilized as a practical training tool for fire-fighting activities. Please feel free to contact us if you have any requests. 【Simulation Examples】 ■ Changes due to the height of the heated surface and three-dimensional display ■ Water spray simulation ■ Foam spray simulation ■ Tank fire simulation *For more details, please download the PDF or feel free to contact us.
For the repair and review of disaster prevention equipment! Consideration of impact assessment and countermeasures such as emergency response plans.
At FPEC Corporation, we conduct "Plant Disaster and Disaster Prevention Simulations," including explosion simulations. We carry out impact assessments during disasters and consider countermeasures such as emergency response plans. We enhance risk communication with neighboring residents, improve in-house disaster prevention education and training, and can utilize this for the repair and review of disaster prevention equipment as well as for application materials to the fire department. Please feel free to contact us if you have any requests. [Usage Methods] ■ Risk communication with neighboring residents ■ Enhancement of in-house disaster prevention education and training ■ Repair and review of disaster prevention equipment ■ As application materials to the fire department *For more details, please download the PDF or feel free to contact us.
![[AI×VR Development] Optimization Simulation of Work Actions in VR Space](https://image.mono.ipros.com/public/product/image/910/2000498090/IPROS72121696213891502207.jpeg?w=280&h=280)
A unique simulation system that combines AI and VR.
Our company is engaged not only in the development of AI (artificial intelligence) using deep learning but also in the development of technologies such as VR (virtual reality) and AR (augmented reality). By combining these technologies, we can create value that cannot be replicated by other companies. For example, one case of combining VR and AI is the development of a simulation system to optimize the movements of workers in factory line operations. This system incorporates our proprietary AI skeletal detection engine, "VisionPose," which can identify the positions of workers under physical strain. By visualizing this strain, we can suggest more efficient movements. This feature is not found in similar products from other companies, making it a product that leverages our strengths. Additionally, by combining the VR space with VisionPose, we can apply it to various scenarios.
Quick assessment of energy-saving effects from water and hot water conservation in hospitals and nursing facilities in just one minute!
Check the potential for reducing utility costs in hospitals and nursing facilities in just 1 minute! "Pitatto OU" is an automatic water supply control service that effortlessly achieves energy saving, water conservation, and hot water conservation in environments that use large amounts of water and hot water, such as dishwashing in kitchens and mechanical bathtubs (care baths). 【Just select for simulation! Input takes only 1 minute】 You can instantly check the effects of implementation by simply selecting the following items: - Industry (e.g., hospital, nursing facility, etc.) - Type of water supply (tap water, well water, etc.) - Type of fuel for hot water supply (gas, electricity, heavy oil, etc.) There are no initial costs, and it's a monthly subscription for peace of mind. In addition to cost reductions from water and hot water savings, it also contributes to decarbonization management. Furthermore, if the expected effects are not achieved after implementation, there is a risk-free money-back guarantee for the difference. Visualize the "waste" in utility costs and take solid measures. Start with the simulation and feel free to give it a try. *For more details, please check the related links.
