CCTECH Japan List of Products and Services

Handlers can be broadly categorized into gravity type, horizontal type, and rotary (turret) type. Depending on the type of semiconductor device and package, the choice of handler plays a crucial role in reducing the time required in the semiconductor manufacturing process. Entering the 2020s, under the impact of the COVID-19 pandemic, the demand for semiconductors has changed significantly, leading to an imbalance between supply and demand and a noticeable shortage of semiconductor supply. As a result, semiconductor manufacturers are increasingly tending to expand their production lines. There are two methods to increase production volume: increasing the number of production lines and shortening the manufacturing time of each line. In this context, it is important to adopt a mindset that overturns traditional fixed notions. This document aims to serve as a catalyst for challenging those fixed ideas.

• Taping Machine

CCTECH is a semiconductor IC tester manufacturer based overseas. With its headquarters in China and a support center in Japan, it is well-known for providing excellent support. Currently, it develops and manufactures IC testers for power semiconductors, testers for analog mixed-signal systems, as well as handlers and probers that transport ICs to the testing section. After selecting testers in Japan, it is important to have support overseas when deploying mass production testers to overseas OSATs. By using CCTECH's equipment, it is possible to support overseas OSAT manufacturers from the headquarters in China. *For more details, please download the materials or contact us.*

• Semiconductor inspection/test equipment

★Prest Kappar (Defect Inspection Device) Utilizing semiconductor inspection technology and advanced transport technology for miniaturized products, it excels in defect detection of a wide range of thin film metal processing sheets. Its unique algorithm for comparing adjacent products makes recipe creation easy. ★Razer Kappar (Defective Material Removal Device) This is a defective material removal device that uses handler transport technology employed in semiconductor manufacturing processes, used after defect inspection with Prest Kappar. It can automatically remove defective materials even if the target workpiece has minimal waviness or deformation. *For more details, please refer to the PDF document. Feel free to contact us with any inquiries.*

• Visual Inspection Equipment
• Defect Inspection Equipment

A device that automatically removes only defective components detected by Prest Kappar (a thin film metal processing appearance inspection device) by acquiring information about the defective components in combination with CCTECH. Traditionally, the process involved manually obtaining information about the defective components through visual inspection and then mechanically removing them through visual confirmation. By using an automated machine in this process, it eliminates the risk of incorrect removal and significantly shortens the manufacturing process time through automation.

• Other machine tools

High-speed rotary handler. This device can provide various packages in different packaging forms. It features a unique impulse removal function with a voice coil during device pickup, achieving low cost while emphasizing stability. It is also capable of handling heating measurements. Not only for semiconductors, but it can also accommodate various solid objects.

• Taping Machine

High-speed rotary handler. This device is capable of providing various packages in different packaging forms. It features a unique impulse removal function during device pickup, achieving low cost while emphasizing stability. It can accommodate not only semiconductors but also a variety of solid objects.

• Taping Machine

High-speed rotary handler. This device can provide various packages in different packaging forms. It features a unique impulse removal function during device pickup, achieving low cost while emphasizing stability. It can accommodate not only semiconductors but also a variety of solid objects.

• Taping Machine

Currently, active alignment, which positions the image sensor and lens, uses a 2D chart and employs a method of taking several images to achieve focus. The fundamental principle involves using a 3D chart to align both the front and depth focus simultaneously for lens positioning. This time, we will introduce the 3D chart related to the fundamental principle of active alignment. In this technical handbook, we will cover the following topics: ★ Optical axis of high-performance cameras ★ Methods for optical axis adjustment ★ 3D chart technology ★ Experiments to verify the principles

• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment
• Other semiconductors

In semiconductor manufacturing processes such as film deposition, resist coating, lithography, etching, and CMP, it is desirable to perform uniform manufacturing processes on each die on the wafer. However, in reality, variations such as foreign matter contamination, pattern defects, and film thickness lead to inconsistencies on the wafer. By incorporating automated inspection equipment into each of these processes, fine adjustments to the semiconductor process operations can be made. Furthermore, not only for semiconductor wafers but also for metal etching products, defects and distortions are inspected visually. However, as the quantity of these processed products increases, the likelihood of oversight in visual inspections and the labor costs can become significantly inflated. To reduce these oversights and labor costs, we introduce Prestige into the inspection processes of semiconductor and metal etching products, enabling cost reductions from oversight in the inspection process. 【Features】 ● High-resolution specification of 7μm and high-throughput specification of 38μm pixel resolution, accommodating a wide range of inspections ● RGB three-color LED lighting for optimized illumination according to patterns ● Adjustable camera angles for inspecting bright field to dark field images ● Simultaneous processing of defect inspection and uniformity inspection ● Compatible with 6/8/12-inch wafers ● Optional features for backside wafer inspection

• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment
• Visual Inspection Equipment

tSort is a semiconductor sorting device that extracts dies from diced wafers/film frames and transfers them to tape/reels while inspecting the dies. It is capable of inspection using visible light and infrared light. 【Features】 ● 8”, 12”, diced wafers/film frames (WLCSP, BGA, eWLB, QFN, COG, etc.) ● Taping, compatible with JEDEC/canisters ● Throughput: 40,000 pph ● Inspection items - Co-planarity inspection of dies/solder balls/bumps - Bump defect detection - IR, infrared appearance inspection - 5-sided inspection - Die size - Dicing line edge inspection - Marking inspection - Scratch and foreign matter inspection

• Taping Machine
• Binding/Packing Machine
• Visual Inspection Equipment

This is a semiconductor sorting device that performs visual inspection of the 5th and 6th sides of diced wafers, and transfers them to taping, reels, or trays. It is difficult to visually inspect the dies after dicing, so an automatic machine inspects for scratches and debris, determines good and defective products, and facilitates the transfer. 【Features】 ● Compatible with 8”, 12”, and diced wafers/film frames (WLCSP, BGA, eWLB, QFN, etc.) ● Supports taping and JEDEC/waffle trays ● Throughput: pph 20K ● Inspection items: - Co-planarity inspection of dies/solder balls/bumps - 5-side inspection - Die size - Cut line edge inspection - Marking inspection - Scratch and foreign matter inspection

• Visual Inspection Equipment
• Binding/Packing Machine
• Taping Machine

Hexa EVO+ is a device for inspecting 3D appearance defects on both sides of semiconductor IC packages, ball arrays, leads, etc., and automatically packaging dies, IC sorting, and handler appearance inspection. It can accommodate a variety of inspection items and various packages. 【Features】 ● Appearance inspection for packages under 100mm ● Throughput, UPH90K ● Dual taping output support ● Automatic position correction ● Defective component management ● Appearance inspection contents ・3D front and back appearance inspection ・Ball and pad inspection ・Front, back, and side appearance inspection ・Package thickness inspection ・Color inspection ・Crack inspection

• Binding/Packing Machine
• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment

AT468 is a semiconductor, die, and package sorter that supports various input and output types. It is a device that performs visual inspection after extracting from tubes, trays, and taping/reels, and then packages them into tubes, trays, and taping/reels.

• Binding/Packing Machine
• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment

PRESTIGE V is a budget version of the existing PRESTIGE II. The size of the device has been reduced by 50%, making it more space-efficient. The camera angle is set during the evaluation stage and fixed at the time of factory shipment. Although there are limitations on wafer size, it inherits the inspection capabilities of the PRESTIGE II as a budget version product.

• Visual Inspection Equipment
• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment

CTT3280F is ideal for testing discrete power semiconductors such as MOSFETs and diodes. By using 16 sites simultaneously, it is possible to increase throughput. The supported voltage is up to 1000V/10A. Test programs can be developed in C language, making it easy to create programs.

• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment
• Tester

The CTA8280F is the second generation analog tester from CCTECH. It is ideal for various analog semiconductor applications, including power-related ICs, operational amplifiers, power amplifiers, and motor drivers.

• Semiconductor inspection/test equipment
• Tester
• Other semiconductor manufacturing equipment

Tester for electrical characteristic testing of analog mixed ICs. It is characterized by very high accuracy in voltage and current measurements. It can be used for battery monitoring ICs, analog-related products, and analog-digital mixed products.

• Tester
• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment

The CS series is a handler for memory and is designed for Pick & Place type substrates.

• Other conveying machines
• Semiconductor inspection/test equipment
• Substrate transport device (loader/unloader)

This is a space-saving type of prober that has been downsized from the conventional size. It significantly improves throughput and utilizes optical technology for wafer alignment. Additionally, by efficiently accessing prober functions and testing functions through test applications, it greatly reduces the software development period.

• Semiconductor inspection/test equipment
• Tester
• Other semiconductor manufacturing equipment

The CM8200 is an inspection device that supports the appearance inspection of fingerprint authentication modules and enables testing of certain electrical characteristics. Essentially a fingerprint authentication sensor, the CCTECH CM series can be customized to accommodate various appearance inspections, not just limited to modules. Recently, there has been an increase in products that incorporate multiple semiconductor dies within IC packages, such as RF-related semiconductors. This product can inspect all defects, including wire bonding inspections of the substrate board inside those semiconductor chips, as well as scratches and chips.

• Circuit Board Inspection Equipment
• Visual Inspection Equipment
• Defect Inspection Equipment

The CM2030 is an inspection device designed for the appearance inspection of image sensor camera modules. While it is fundamentally an image sensor, CCTECH's CM series can accommodate various appearance inspections not only for modules but also through customization. Recently, there has been an increase in products that incorporate multiple semiconductor dies within IC packages, such as RF-related semiconductors. This product is capable of inspecting various defects, including wire bonding inspections of the substrate board inside those semiconductor chips, as well as scratches, chips, and other defects.

• Semiconductor inspection/test equipment
• Circuit Board Inspection Equipment
• Visual Inspection Equipment

To transport parts to semiconductor inspection equipment, throughput is an important selection criterion. CCTECH's C8 and C9 series are gravity-based transport devices and handlers. The C8 series is for transport only, while the C9 series supports both transport and appearance inspection. The appearance inspection uses two cameras to inspect the appearance of semiconductor packages.

• Tester
• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment

Recently, amid whispers about the supply of power semiconductors, production lines in factories are being strengthened. As various semiconductor manufacturing equipment is used, the products manufactured must ultimately undergo testing of their electrical characteristics. Japan, which is also a large market for power semiconductors, is currently facing a situation where the prices of testers themselves are not decreasing, even though electrical characteristic testers are supplied by Japanese manufacturers. CCTECH's CTT3700 enables testing of MOSFETs, diodes, voltage regulators, and IGBT devices compatible with 2000V/100A, achieving lower prices by developing and manufacturing overseas compared to the prices previously offered by traditional domestic Japanese manufacturers.

• Tester
• Semiconductor inspection/test equipment
• Other semiconductor manufacturing equipment

Using patented OTF (On the Fly) technology and two inspection cameras to simultaneously capture bright and dark fields, the inspection process time is reduced by half. Additionally, 3D inspections are possible, enabling the inspection of coplanarity for bumps used in WLSCP packages and others.

• Visual Inspection Equipment
• Semiconductor inspection/test equipment
• Tester