フジカ工業 List of Products and Services

This is a non-asbestos joint sheet made by adding inorganic fillers to inorganic fibers and aramid fibers, with oil-resistant synthetic rubber blended as a binder. The T1995 produced by Nichias Corporation is a material that is easy to process. The recommended temperature range for use is -100°C to 150°C. We also accept water jet processing in various sizes and quantities.

• Other physicochemical equipment

Ethylene-propylene rubber is a rubber that excels in weather resistance and is recommended for use outdoors. We also accept orders with old rubber included (removal of existing rubber included). After insert molding, grooves will be machined using a lathe. It is incorporated into a wide variety of machines, such as rollers for transportation and rollers for feeding OA equipment.

• roller

It is one of the common rubber sponges made from CR rubber that has been foamed. You can often find it as gap-filling cushions or tapes at home improvement stores. It also meets flame retardant standards.

• Control Panel

This is the NB250NE manufactured by Maxell Kureha Co., Ltd. It is a rubber sheet cut into strips from a roll. It is a product that complies with the revised RoHS directive (RoHS2). Nitrile rubber, known as Hiker, is a representative of oil-resistant rubber and also has good abrasion resistance and aging resistance.

• Rubber

We processed the matching parts for the MC901 jig manufacturing. We measured and created drawings from the existing parts and proceeded with production. Since adjusting the fitting parts individually is difficult, we will accept them as a set.

• Winding Machine

Initially, we calculated the estimated cost based on rough dimensions, and ultimately we took the actual item to create a mold. Height adjustments can be made by backfilling the holes. Since a mold scanner is available, please feel free to consult with us.

• Cushioning material

Ethylene-propylene rubber is a type of rubber that excels in weather resistance and is widely used in outdoor applications. It is shaped under heat and pressure to conform to the mold, similar to the image of baking taiyaki. To increase strength, it is also possible to insert metal washers and mold them integrally.

• Rubber
• Other safety and hygiene products

This is PVC with an anti-static coating on the surface. The cutting surface loses its functionality due to being shaved off. We also handle other functional materials.

• Other physicochemical equipment

We are performing adhesive processing with JSP-made Miraplank at a 25-fold increase. This material is often used in examples such as cushioning materials for home appliances and parts transport trays in factories. In the construction field, it can also be used as insulation material and joint material.

• Cushioning material

We pour urethane into a rough cylindrical mold and let it harden. We shape the outer diameter on a lathe and finish the surface with grinding. In the case of old rubber, we start with the stripping process.

• roller

We are manufacturing pulleys that utilize the wear resistance of MC nylon. We also offer built-in bearings and have implemented snap rings to prevent detachment. By producing them together, we can ensure that there is no core runout.

• Other processing machines

Polyvinyl chloride, commonly known as PVC, is an inexpensive and widely used material. The gray ones are familiar in applications such as piping. Other transparent resin processing, such as acrylic, is also available.

• Bag making machine/slitter

C-4305 is a foam material primarily composed of CR rubber, used for cushioning and water-stopping materials, and it does not allow liquids to pass through due to its closed-cell structure. It has almost no water absorption or breathability, and can achieve water-stopping with low compression rates. It complies with the flame retardant standard UL94HF-1. The hardness is a medium hardness of 25±5°, the color is black, the apparent density is 190±3 kg/m³, and the effective dimensions are 30mm × 1,000mm × 1,000mm (1,300mm, 2,000mm).

• Rubber

High heat-resistant silicone rubber is a type of rubber that performs well in dryers and other applications. It is easy to color and can be molded into various colors. Additionally, it has high hygiene properties and is used in high-performance materials for medical and food equipment.

• Other heaters

NR has the so-called most rubber-like elasticity, excellent wear resistance, cold resistance, and mechanical properties. It is also inexpensive among synthetic rubbers and easy to process. We have stock of sheets and double-sided tape available in various thicknesses.

• Other machine elements

We can color and mold soft PVC raw materials. Colors can be specified using DIC or Pantone color codes. However, the actual molded color may appear different from the color samples.

• Other physicochemical equipment

Thin material processing results in fewer edge irregularities and residual fibers compared to thick materials. Laminated bonding with double-sided tape is fundamental. The thickness of standard foam starts from 3mm or more.

• Cushioning material

Mitsui Chemicals Tohcello, Inc.'s high sheet is a low-foaming polyethylene sheet. It is hygienic, has low odor, has minimal impact on contents, and possesses moderate cushioning properties. The PP grade is laminated with OPP sheets on both sides, reducing the gas permeability of substances like carbon dioxide.

• Plastic utensils and containers

ECS is a lightweight, soft-touch polyurethane foam product that has minimal sagging and is widely used as cushioning material. Due to its continuous bubbles, it allows water to pass through. Being a polyether-based foam, it is chemically stable against water and has excellent chemical resistance. It comes in colors such as white, black, gray, blue, pink, green, and yellow, and can also have adhesive or double-sided tape applied to the back.

• Other machine elements

We will shape it by pouring into various shapes such as round and square. In the finishing cutting process, in addition to routers, lathes can also be used. Casting and cutting processing can be widely utilized from sheet materials to rollers.

• Other machine elements

Urethane 90° is a material with high hardness and high strength, making it easy to process with cutting tools. Although it is rubber, it is also possible to create C and R edges at the corners. If it comes with old rubber, rest assured that we will remove it and process it.

• roller

We handle MC nylon in blue from manufacturers such as Mitsubishi, Mitsuboshi, and Nack. Here, we have reinforced the screw holes by inserting an insert into the pilot hole. Care was taken in the manufacturing process to ensure that the three plates slide smoothly by aligning with the protrusions.

• Other machine elements

It is possible to create shapes from rough drawings or hand-drawn sketches. We also offer suggestions for exterior cases tailored to the items being stored. Please feel free to consult us when you are looking for a sturdy case that is waterproof and dustproof.

• Cushioning material

For high hardness of 95° in NBR, it must be ordered based on the material formulation. High hardness products often have issues with material flow within the mold, leading to many challenges. Since rubber balls are difficult to process through cutting, please consider molding them with a mold.

• others

B-4, which has a moderate soft feel, is often used in the production of interior products. It is lightweight, flexible, and does not allow water to pass through, similar to a pool kickboard. We will also reflect on layout and current improvement points in conjunction with production.

• Cushioning material

Among the POM materials commonly used in machining, Delrin is a well-known material. There are also low-stress grades available to minimize warping as much as possible. On the other hand, it is a difficult material to bond, so bolting is the basic method of fastening.

• Other machine elements

Dip a heated mold into liquid PVC to create a shape through a chemical reaction and then remove the mold. We can accommodate small items with a diameter of a few millimeters to those exceeding 100mm. Depending on the mold, we can also handle irregular shapes and can cut parts to create a sleeve-like form.

• Wiring materials

CR has average properties such as weather resistance, ozone resistance, heat resistance, and chemical resistance, and it is also non-flammable. It is incorporated into a wide variety of machines, including rollers for transportation and rollers for feeding OA equipment. Core materials can be supplied or manufactured, and we welcome inquiries for both small and large items.

• roller

A-12 is a firmer foam with a bulk density of 120 kg/m³, made from polyethylene that is seven times expanded. It is available in three colors: white, black, and gray. Its shape is resistant to deformation, making it suitable for use with jigs.

• Cushioning material

In transparent resin, inexpensive PVC is often used for cover parts and other applications. It excels in chemical resistance and weather resistance, and also possesses flame retardancy. The adhesive surfaces are also finished neatly through manual processing.

• Bag making machine/slitter

ECS is a relatively inexpensive and widely used polyurethane foam. Bonding with the base plate is also possible. Our company can punch out materials ranging from thin ones to those about 100mm thick.

• Cushioning material

Si is particularly excellent in cold and heat resistance, with very little change in properties even in the range of -60° to 250°. It also excels in weather resistance and electrical insulation. This has been cut using a water jet cutter. It accurately reproduces the shape of the drawing. It complies with the Food Sanitation Act, so it is used in food machinery and medical devices.

• Food Processing Equipment

Ethylene propylene rubber is excellent in weather resistance, ozone resistance, and aging resistance, making it suitable for long-term use even under outdoor conditions. Since it is a commonly used rubber, we have materials in stock depending on the thickness. We can also discuss the number of lots, so please feel free to contact us.

• Other machine elements

Heat-treated metal fittings are immersed in liquid PVC to create shapes through a chemical reaction. It can be colored in various shades from translucent, and we also accommodate additives for specific industries. We also accept secondary processing such as partial drilling and cutting.

• Pliers, Nippers

POM is a representative engineering plastic that excels in wear resistance and sliding properties. It is a good material for welding and machining. It also has excellent dimensional stability and is a major engineering plastic.

• Other machine elements

Urethane rubber is a type of rubber that excels in mechanical strength. Shapes are produced through casting and machining. As shown in the image, one of its key features is that it is easy to color.

• Other machine elements

PC, commonly known as polycarbonate, has excellent impact resistance and a wide range of usable temperature. It is one of the four major transparent resins, but the cut surfaces will become cloudy unless polished. It can be processed from sheet materials, round bars, and more.

• Other machine elements

Neolon is a representative standard product of CR sponge extrusions. It is cut to the dimensions of the desired circle and connected at both ends. Due to its shape resembling an O-ring, it is referred to as endless processing, meaning it has no ends. It is ideal for fitting into the edges of covers or lids where airtightness needs to be enhanced.

• Pneumatic Equipment

This is a different color of the gray PVC that is often seen in everyday life. It has excellent chemical resistance and weather resistance, and its flame retardant properties can also prevent the spread of fire. Please consult us when processing transparent resins such as acrylic, polycarbonate, and PET.

• Other machine elements

By pouring sponge into the upper and lower two-tier rollers with uneven surfaces while cutting, it can be finished into a shape with such characteristics. The height and shape of the waves can also be varied depending on the unevenness of the roller. During manufacturing, it will inevitably produce an even number of raw materials. How about using it for the back cover of a case?

• Cushioning material

Silicone rubber is particularly excellent in cold and heat resistance, with very little change in properties even in the range of -60° to 250°. It complies with the Food Sanitation Act, making it suitable for use in food machinery and medical devices. We have stock available in various thicknesses, so please feel free to consult us.

• Other machine elements

Polyacetal is a representative engineering plastic that excels in wear resistance and sliding properties. It is suitable for applications such as bearings and pulleys. We also accept inquiries for alternative materials to metals.

• Other machine elements

This is a Burokuran roller that boasts higher abrasion resistance, load-bearing capacity, tensile strength, and tear strength than regular urethane rubber. It is made from a material that is used for tires on roller coasters. Manufacturing is carried out at our partner factory, which has received handling certification from overseas manufacturers.

• roller

CR rubber sponge is flame-retardant, has good oil resistance, weather resistance, and ozone resistance, and is a commonly used industrial rubber sponge. C-4305 is a medium hardness product with a hardness of 25°±5°, and it is one of the most used rubber sponges in our company. For the double-sided tape, we use Terahata Manufacturing Co., Ltd. #7783.

• Refrigerators and freezers

PET is one of the four major transparent resins and is a familiar material used in bottles and other products. It does not emit harmful gases when burned and has excellent recyclability. Thin sheets can be processed through cutting, allowing for mass production.

• Other safety and hygiene products