フジカ工業 List of Products and Services

Mitsui Chemicals Tohcello, Inc.'s high sheet is a low-foaming polyethylene sheet. It is hygienic, has low odor, has minimal impact on contents, and possesses moderate cushioning properties. The PP grade is laminated with OPP sheets on both sides, reducing the gas permeability of substances like carbon dioxide.

• Plastic utensils and containers

ECS is a lightweight, soft-touch polyurethane foam product that has minimal sagging and is widely used as cushioning material. Due to its continuous bubbles, it allows water to pass through. Being a polyether-based foam, it is chemically stable against water and has excellent chemical resistance. It comes in colors such as white, black, gray, blue, pink, green, and yellow, and can also have adhesive or double-sided tape applied to the back.

• Other machine elements

We will shape it by pouring into various shapes such as round and square. In the finishing cutting process, in addition to routers, lathes can also be used. Casting and cutting processing can be widely utilized from sheet materials to rollers.

• Other machine elements

Urethane 90° is a material with high hardness and high strength, making it easy to process with cutting tools. Although it is rubber, it is also possible to create C and R edges at the corners. If it comes with old rubber, rest assured that we will remove it and process it.

• roller

We handle MC nylon in blue from manufacturers such as Mitsubishi, Mitsuboshi, and Nack. Here, we have reinforced the screw holes by inserting an insert into the pilot hole. Care was taken in the manufacturing process to ensure that the three plates slide smoothly by aligning with the protrusions.

• Other machine elements

It is possible to create shapes from rough drawings or hand-drawn sketches. We also offer suggestions for exterior cases tailored to the items being stored. Please feel free to consult us when you are looking for a sturdy case that is waterproof and dustproof.

• Cushioning material

For high hardness of 95° in NBR, it must be ordered based on the material formulation. High hardness products often have issues with material flow within the mold, leading to many challenges. Since rubber balls are difficult to process through cutting, please consider molding them with a mold.

• others

B-4, which has a moderate soft feel, is often used in the production of interior products. It is lightweight, flexible, and does not allow water to pass through, similar to a pool kickboard. We will also reflect on layout and current improvement points in conjunction with production.

• Cushioning material

Among the POM materials commonly used in machining, Delrin is a well-known material. There are also low-stress grades available to minimize warping as much as possible. On the other hand, it is a difficult material to bond, so bolting is the basic method of fastening.

• Other machine elements

Dip a heated mold into liquid PVC to create a shape through a chemical reaction and then remove the mold. We can accommodate small items with a diameter of a few millimeters to those exceeding 100mm. Depending on the mold, we can also handle irregular shapes and can cut parts to create a sleeve-like form.

• Wiring materials

CR has average properties such as weather resistance, ozone resistance, heat resistance, and chemical resistance, and it is also non-flammable. It is incorporated into a wide variety of machines, including rollers for transportation and rollers for feeding OA equipment. Core materials can be supplied or manufactured, and we welcome inquiries for both small and large items.

• roller

A-12 is a firmer foam with a bulk density of 120 kg/m³, made from polyethylene that is seven times expanded. It is available in three colors: white, black, and gray. Its shape is resistant to deformation, making it suitable for use with jigs.

• Cushioning material

In transparent resin, inexpensive PVC is often used for cover parts and other applications. It excels in chemical resistance and weather resistance, and also possesses flame retardancy. The adhesive surfaces are also finished neatly through manual processing.

• Bag making machine/slitter

ECS is a relatively inexpensive and widely used polyurethane foam. Bonding with the base plate is also possible. Our company can punch out materials ranging from thin ones to those about 100mm thick.

• Cushioning material

Si is particularly excellent in cold and heat resistance, with very little change in properties even in the range of -60° to 250°. It also excels in weather resistance and electrical insulation. This has been cut using a water jet cutter. It accurately reproduces the shape of the drawing. It complies with the Food Sanitation Act, so it is used in food machinery and medical devices.

• Food Processing Equipment

Ethylene propylene rubber is excellent in weather resistance, ozone resistance, and aging resistance, making it suitable for long-term use even under outdoor conditions. Since it is a commonly used rubber, we have materials in stock depending on the thickness. We can also discuss the number of lots, so please feel free to contact us.

• Other machine elements

Heat-treated metal fittings are immersed in liquid PVC to create shapes through a chemical reaction. It can be colored in various shades from translucent, and we also accommodate additives for specific industries. We also accept secondary processing such as partial drilling and cutting.

• Pliers, Nippers

POM is a representative engineering plastic that excels in wear resistance and sliding properties. It is a good material for welding and machining. It also has excellent dimensional stability and is a major engineering plastic.

• Other machine elements

Urethane rubber is a type of rubber that excels in mechanical strength. Shapes are produced through casting and machining. As shown in the image, one of its key features is that it is easy to color.

• Other machine elements

PC, commonly known as polycarbonate, has excellent impact resistance and a wide range of usable temperature. It is one of the four major transparent resins, but the cut surfaces will become cloudy unless polished. It can be processed from sheet materials, round bars, and more.

• Other machine elements

Neolon is a representative standard product of CR sponge extrusions. It is cut to the dimensions of the desired circle and connected at both ends. Due to its shape resembling an O-ring, it is referred to as endless processing, meaning it has no ends. It is ideal for fitting into the edges of covers or lids where airtightness needs to be enhanced.

• Pneumatic Equipment

This is a different color of the gray PVC that is often seen in everyday life. It has excellent chemical resistance and weather resistance, and its flame retardant properties can also prevent the spread of fire. Please consult us when processing transparent resins such as acrylic, polycarbonate, and PET.

• Other machine elements

By pouring sponge into the upper and lower two-tier rollers with uneven surfaces while cutting, it can be finished into a shape with such characteristics. The height and shape of the waves can also be varied depending on the unevenness of the roller. During manufacturing, it will inevitably produce an even number of raw materials. How about using it for the back cover of a case?

• Cushioning material

Silicone rubber is particularly excellent in cold and heat resistance, with very little change in properties even in the range of -60° to 250°. It complies with the Food Sanitation Act, making it suitable for use in food machinery and medical devices. We have stock available in various thicknesses, so please feel free to consult us.

• Other machine elements

Polyacetal is a representative engineering plastic that excels in wear resistance and sliding properties. It is suitable for applications such as bearings and pulleys. We also accept inquiries for alternative materials to metals.

• Other machine elements

This is a Burokuran roller that boasts higher abrasion resistance, load-bearing capacity, tensile strength, and tear strength than regular urethane rubber. It is made from a material that is used for tires on roller coasters. Manufacturing is carried out at our partner factory, which has received handling certification from overseas manufacturers.

• roller

CR rubber sponge is flame-retardant, has good oil resistance, weather resistance, and ozone resistance, and is a commonly used industrial rubber sponge. C-4305 is a medium hardness product with a hardness of 25°±5°, and it is one of the most used rubber sponges in our company. For the double-sided tape, we use Terahata Manufacturing Co., Ltd. #7783.

• Refrigerators and freezers

PET is one of the four major transparent resins and is a familiar material used in bottles and other products. It does not emit harmful gases when burned and has excellent recyclability. Thin sheets can be processed through cutting, allowing for mass production.

• Other safety and hygiene products

ECS is a lightweight, soft-touch polyurethane foam product that is less prone to deformation and is widely used as toys and cleaning sponges. Being a polyether-based foam, it is chemically stable in water and has excellent chemical resistance. It is also relatively inexpensive. It comes in various sizes and colors, including white, black, gray, blue, pink, green, and yellow, and can be combined to create colorful items.

• others

Baiton has the best heat resistance among synthetic rubbers and is a rubber that combines oil resistance, chemical resistance, and weather resistance. Like fluororesins such as PTFE, its performance is very good, but it is an expensive material. We also accept cutting and tape processing.

• Other machine elements

Soft polyvinyl chloride is a flexible plastic material used in various everyday locations. It is commonly used for items such as pencil cases, pool bags, vehicle inspection certificate holders, and name tags. It is bonded and integrated by applying heat and pressure.

• Packaging Bags

A-8 is a general-purpose polyolefin foam that is readily available and inexpensive. It comes in six standard colors: white, black, gray, blue, green, yellow, and red, with a special color of deep black available as well. We also accept orders for small items, so please feel free to consult with us.

• Cushioning material

Urethane rubber has excellent wear resistance and mechanical strength. We will create a custom mold tailored to the fittings and lining positions and proceed with casting. Finishing can be done through cutting, machining, and other secondary processes to shape the product.

• Other machine elements

POM is a material that excels in mechanical strength and wear resistance. A representative material is Delrin produced by Polyplastics Co., Ltd. Black materials may also be used.

• Other machine elements

Integral skin is a material that can form a strong membrane, resulting in a durable and beautiful appearance. It also accommodates surface coatings, texture, hardness selection, and the insertion of hardware. 3D data or a master model is required. We can also propose prototypes.

• Interior parts

EPDM is characterized by excellent weather resistance, ozone resistance, and aging resistance, as well as good electrical properties and high resistance to polar liquids. It is especially recommended for outdoor use. There are also sheets available in standard colors such as black and white.

• Other machine elements

Acrylic is a representative of transparent resin. It is easy to process and is often used for fixtures and other items. There is a wide variety of colors available, so please feel free to consult with us.

• Bag making machine/slitter

B-4 is a polyethylene sponge with a moderate softness. It has a texture similar to that of a kickboard. The method involves immersing it in melted PVC pool after punching it out to form a coating. Printing is also possible on the coated surface. It excels in insulation, water resistance, and chemical resistance, contributing to the safety and durability of the product.

• others

EPDM is characterized by excellent weather resistance, ozone resistance, and aging resistance, as well as good electrical properties and high resistance to polar liquids. This is recommended for outdoor use. We have stock sheets available in various thicknesses. Please feel free to consult us.

• Piping Materials

POM is a resin that excels in mechanical strength and wear resistance. It is widely used as a component in sliding parts. If the dimensions are known, it can be produced from a hand-drawn diagram.

• Other machine elements

B-4 is a lightweight, general-purpose polyethylene foam with 30 times expansion. It is available in white, black, gray, blue, green, red, and yellow, and is readily available and inexpensive. We also accept bottom board bonding processing.

• Cushioning material

This is a process where urethane rubber is poured into a mold and solidified, then machined using a lathe or router end mill. This is something that has been shaved down to a thickness of 0.5mm, resembling a veneer. However, the thickness is the target. Urethane rubber is particularly excellent in abrasion resistance and weather resistance, has very strong tear resistance, and also possesses oil resistance, making it suitable for outdoor use and machine integration.

• Granulating Equipment

MC901 has excellent mechanical strength, heat resistance, chemical resistance, and wear resistance. It is a material widely used in general. It can also be produced using MC nylon from other manufacturers, such as Mitsuboshi Seisakusho. There are processing machines that are advantageous for large quantities. Please feel free to consult with us.

• Bag making machine/slitter

CR has average properties such as weather resistance, ozone resistance, heat resistance, and chemical resistance, and it is also non-flammable. We accept both old rubber removal (including existing rubber) and the supply of core materials. If you are nearby, we can also pick up long items, so please feel free to consult with us.

• roller

CR rubber sponge is flame-retardant, has good oil resistance, weather resistance, and ozone resistance, and is a commonly used industrial rubber sponge. It has a hardness of 25°±5°, classified as medium hardness. Harder and softer options are available, and you can check the lineup in the sample book. The double-sided tape used is Nitto Denko Corporation's LE5103.

• Control Panel