ケーエヌエフ・ジャパン List of Products and Services

- Process pump - Corrosion-resistant specification Basic flow rate: 27 l/min to 30 l/min (varies depending on diaphragm material) Maximum allowable discharge pressure: 2 - 4 bar (0.2 - 0.4 MPa) Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available in Japanese voltage AC single-phase 100V 50/60Hz.

• Other pumps
• Special Pump

N813.3 Series Basic flow rate: 13 l/min (variable flow rate option available) Achievable vacuum level: 3.0 mbar abs ~ Maximum allowable discharge pressure: 0.1 bar (0.01 MPa) N813.4 Series Basic flow rate: 13 l/min (variable flow rate option available) Achievable vacuum level: 0.5 mbar abs ~ Maximum allowable discharge pressure: 0.1 bar (0.01 MPa)

• Other pumps
• Special Pump

N86.0 KNDC Basic flow rate: 6 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KTDC Basic flow rate: 5.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KNDC-B Basic flow rate: 5 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KN.29DC-B Basic flow rate: 3.8 - 5 l/min ～ Achievable vacuum level: < 100 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KTDC-B Basic flow rate: 4.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar N86.0 KT.29DC-B Basic flow rate: 2.8 - 4.5 l/min ～ Achievable vacuum level: < 160 mbar abs ～ Maximum allowable discharge pressure: 0.3 bar

• Other pumps
• Special Pump

- Can be used for the transport of wet gases and condensate gases. - Can be restarted from a reduced pressure state or a positive pressure state (brushless DC motor). - The brushless DC motor allows for flow rate adjustment via PWM control. Basic flow rate: 5.5 - 6.5 l/min ~ Achievable vacuum level: 100 - 160 mbar abs ~ Maximum allowable discharge pressure: 2.4 - 2.5 bar (0.24 - 0.25 MPa)

• Other pumps
• Special Pump

- Brushless DC motor - High pumping speed across all areas of positive and negative pressure - Robust and compact - Analog or digital speed control - Pump parameters can be read - Safety features N 938 AN.29 DC-B Basic flow rate: 9 - 35 l/min Achievable vacuum level: < 160 mbar abs Maximum allowable discharge pressure: 1.0 bar (0.1 MPa) N 938.1.2 AN.29 DC-B Basic flow rate: 13 - 53 l/min Achievable vacuum level: < 140 mbar abs Maximum allowable discharge pressure: 1.0 bar (0.1 MPa)

• Other pumps

High pressure, low noise The compactly designed NPK 02 swing piston pump demonstrates excellent performance with a maximum discharge pressure of 2.1 barG and a flow rate of 1.8 l/min, consistently maintaining high discharge pressure without overheating during continuous operation. Its low levels of noise and vibration make it ideal for environments where quiet and reliable operation is essential. Customizability to accommodate a wide range of applications The NPK 02 swing piston pump, equipped with multiple combinations of pump heads, valves, and piston seal materials, as well as various motor and eccentricity options, offers the flexibility to meet specific customer requirements and ensure optimal performance for individual applications. It consistently delivers reliable performance to meet the needs of various industries, including medical devices such as endoscope cleaning systems and diagnostic equipment, enhanced analytical instruments for gas monitoring, purging for inkjet and 3D printing systems, and supplying compressed air against liquid pressure. *For more details, please download the PDF or contact us directly.*

• Other pumps
• Special Pump

- Maximum allowable discharge pressure: 12 bar (1.2 MPa) - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10-3 mbar x l/s, .13 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

• Other pumps

- Maximum allowable discharge pressure: 0.5 bar (0.05 MPa) - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10-3 mbar x l/s, .13 specification / .12 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

• Other pumps

- Maximum allowable discharge pressure: 7 bar (0.7 MPa) - Basic flow rate: 58 l/min (50Hz) / 68 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specifications: .9 specification: 6 x 10^-3 mbar x l/s, .13 specification / .12 specification: 6 x 10^-5 mbar x l/s - By using water cooling piping, it can be used at a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

• Other pumps

- Maximum allowable discharge pressure: 7 bar (0.7 MPa) *The double diaphragm .12 specification is 3 bar - Basic flow rate: 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification: SUS / PTFE - Robust design that withstands tough operating conditions - Leak-tight specification: .9 specification: 6 x 10-3 mbar x l/s .13 specification / .12 specification: 6 x 10-5 mbar x l/s - By providing water cooling piping, it can be used up to a maximum allowable ambient temperature of 60°C and a maximum allowable gas temperature of 60°C.

• Other pumps

- Maximum allowable discharge pressure 12 bar (1.2 MPa) - Basic flow rate 110 l/min (50Hz) to 140 l/min (60Hz) - Corrosion-resistant specification SUS / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

• Other pumps

Weight 141g, small piston pump, excellent size-performance ratio, low vibration, low noise, contamination-free, maintenance-free.

• Special Pump
• Other pumps

- Process pump - Corrosion-resistant specification Basic flow rate: 18 l/min to 22 l/min (varies depending on diaphragm material) Achievable vacuum level: < 20 mbar abs Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available for Japanese voltage AC single phase 100V 50/60Hz.

• Other pumps
• Special Pump

- Process pump - Corrosion-resistant specification Basic flow rate: 31 l/min to 39 l/min (varies depending on diaphragm material) Maximum allowable discharge pressure: 2 bar (0.2 MPa) Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available in Japanese voltage AC single-phase 100V 50/60Hz.

• Other pumps
• Special Pump

- Process pump - Corrosion-resistant specification Basic flow rate: 33 l/min to 39 l/min (varies depending on diaphragm material) Achievable vacuum level: < 100 mbar abs Pump head material: Aluminum / Stainless steel Diaphragm material: CR / FPM (FKM) / PTFE-coated Available for Japanese voltage AC single-phase 100V 50/60Hz.

• Other pumps
• Special Pump

- Very stable liquid flow rate - Large flow range - Linear and predictable flow - Minimal variation in pump individual differences - High accuracy through end-of-line calibration - Self-sustaining, capable of dry running - Capable of handling fine particles - Brushless DC motor with digital customization options

• Other pumps
• Special Pump

The liquid diaphragm pump "FM 50" achieves flow accuracy that surpasses our conventional diaphragm liquid delivery pumps, with a precision of ±2% and reproducibility of ±1%, providing stable liquid delivery with minimal flow variation due to pressure fluctuations. 【Features】 ■ Extremely stable liquid flow ■ Linear and predictable flow rate ■ No variation between pumps ■ High accuracy through calibration in the final stage ■ Safety in self-suction and dry running *For more details, please download the PDF or contact us directly.

• Other pumps
• Special Pump

When selecting a pump suitable for liquid applications, "gear pumps" and "diaphragm pumps" are often used in many scenarios. This document provides a comparison of diaphragm pumps and gear pumps, helping to understand the characteristics of each in terms of maintenance, flow rate, and reliability. We are offering technical materials that assist in determining the most suitable pump for your application, free of charge. [Contents: Comparison of Diaphragm Pumps and Gear Pumps] ■ What is a Gear Pump? ■ Mechanism of Diaphragm Pumps ■ Comparison of Diaphragm Pumps and Gear Pumps: Reliability and Lifetime Cost ■ Flow Rate and Pulsation Characteristics ■ Pressure and Suction Capability ■ Contamination in Liquid Transfer, etc. We provide a detailed explanation of the key points for selection. *For more details, please download the PDF or contact us directly.

• Other pumps
• Special Pump

N84.4 Series Basic Flow Rate: 4.8 l/min (variable flow rate option available) Achievable Vacuum Level: 2.0 mbar abs ~ Maximum Allowable Discharge Pressure: 0.1 - 0.3 bar (0.01 - 0.03 MPa) N84.5 Series Basic Flow Rate: 10 l/min (variable flow rate option available) Achievable Vacuum Level: 1.0 mbar abs ~ Maximum Allowable Discharge Pressure: 0.1 - 0.3 bar (0.01 - 0.03 MPa)

• Other pumps
• Special Pump

Basic flow rate: 4.2 - 4.8 l/min ~ Achievable vacuum degree: 4.2 - 5.0 mbar abs ~ Maximum allowable discharge pressure: 0.1 - 0.3 bar (0.01 - 0.03 MPa)

• Other pumps
• Special Pump

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. It features a high discharge specification. - FP1.7 Series / FP1.25 Series We have integrated the pulsation reduction damper with the pump. Two types are available: brushed DC motors and brushless DC motors. The brushless DC motor also allows for digital customization. We will be exhibiting at JASIS 2025, one of Asia's largest cutting-edge science and analysis systems & solutions exhibitions, where manufacturers of analytical and scientific instruments gather. Please visit our booth. We look forward to seeing you there. ■ Exhibition Name: JASIS 2025 ■ Date: September 3 (Wed) - 5 (Fri), 2025 (3 days) ■ Venue: Makuhari Messe International Exhibition Hall and Conference Center ■ Participation Fee: Free (Pre-registration required) ■ Booth Number: 6B-703

• Other pumps

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted materials Basic flow rate: 60 ml/min (TT type 40 ml/min) Flow rate variable range: 5 - 40 ml/min Suction lift: 3 mWg Discharge lift: 60 mWg

• Other pumps

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted materials - It is possible to increase flow rate by parallel connection. - Two flow paths can be supplied with one motor. Basic flow rate: 40 ml/min x 2 Flow rate variable range: 5 - 40 ml/min x 2 Suction lift: 3 mWg Discharge lift: 10 mWg

• Other pumps

- Self-sustaining - Maintenance-free, contamination-free - Abundant wetted materials Basic flow rate: 140 ml/min Suction lift: 3 mWg Discharge lift: 60 mWg

• Other pumps

It can be used for sampling and monitoring high-temperature gases such as flue gas sampling from factories, various process monitoring, and engine exhaust measurement.

• Other pumps

- Transport of liquid and gas samples for analysis - Medical technology - Inhalation devices, etc. - Vacuum technology - Chucking, etc. NPK012 DC-B-M PR Basic flow rate: 8.3 - 12 l/min ± 10% Achievable vacuum level: < 220 mbar abs ~ Maximum allowable discharge pressure: 5 bar (0.5 MPa) * Maximum discharge pressure during continuous operation 2.5 barG NPK012 DC-B-M VA Basic flow rate: 7.0 - 13.5 l/min ± 10% Achievable vacuum level: < 140 mbar abs ~ Maximum allowable discharge pressure: 1 bar (0.1 MPa)

• Other pumps
• Special Pump

- Medical devices - Analytical instruments - Filtration and nebulization - Compressed air supply - Inkjet printer - Security - Food industry Basic flow rate: 2.5 - 3.0 l/min ~ Achievable vacuum level: < 300 mbar abs ~ Maximum allowable discharge pressure: 2.5 bar - 2.8 bar (0.25-0.28 MPa) *Maximum 1 barG during continuous operation

• Other pumps
• Special Pump

- Medical devices - Analytical instruments - Filtration and nebulization - Compressed air supply - Inkjet printer - Security - Food industry Basic flow rate: 3.0 l/min ~ Achievable vacuum level: < 300 mbar abs ~ Maximum allowable discharge pressure: 2.5 bar (0.25 MPa) *Maximum 1 barG during continuous operation

• Other pumps
• Special Pump

- Medical devices - Analytical instruments - Filtration and nebulization - Compressed air supply - Inkjet printer - Security - Food industry Basic flow rate: 2.7 - 3.0 l/min ~ Achievable vacuum level: < 250 mbar abs ~ Maximum allowable discharge pressure: 5 bar (0.5 MPa) *Maximum 2 barG during continuous operation

• Other pumps
• Special Pump

- Transport of liquid and gas samples for analysis - Medical technology - such as inhalation devices - Vacuum technology - such as chucking Basic flow rate: 12 - 24 l/min ~ Achievable vacuum level: < 100 mbar abs ~ Maximum allowable discharge pressure: 7 bar (0.7 MPa)

• Other pumps
• Special Pump

Features - Long lifespan - Adjustable dispense volume 30-80 μl - Wide flow range - Tight flow in both directions - High chemical resistance - Self-priming - Quiet operation

• Other pumps

Features - Long lifespan - Adjustable dispense volume 5-17 μl - Wide flow range - Tight flow in both directions - High chemical resistance - Self-priming - Quiet operation

• Other pumps

- Can be used for the transport of wet gases and condensate gases. - Can be restarted from a reduced pressure state or a positive pressure state (brushless DC motor). - The brushless DC motor allows for flow adjustment via PWM control. Basic flow rate: 4.2 - 5 l/min ~ Achievable vacuum level: < 30 mbar abs ~ Maximum allowable discharge pressure: 0.1 - 0.3 bar (0.01 - 0.03 MPa)

• Other pumps
• Special Pump

It is a silencer for KNF micro pumps.

• Other pumps

LABOPORT N96.18

• Special Pump

LIQUIPORT NF100・NF300

• Special Pump

SIMDOS FEM1.02/FEM1.10

• Special Pump

N920/N950　

• Special Pump

N820/N840/N842/N860　

• Special Pump

N810(Ex)/N820(Ex)/N840(Ex)

• Special Pump

SC920G　

• Special Pump

N 86 / N 811 Series N 816 / N 838 / N 938 Series SC920G N 810 (Ex) / N 820 (Ex) / N 840 (Ex) N 820.3FT.40 / N 840.3FT.40 / N 842.3FT.40 N 920 / N 950 Series

• Special Pump

N 96.18 N 820 G / SC 820 G / SH 820 G / SR 820 G N 840 G / SC 840 G / SH 840 G / SR 820 G N 920 G

• Special Pump

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. - FP7 Series / FP25 Series The pulsation reduction damper has been integrated with the pump. Two types are available: brushed DC motors and brushless DC motors. Digital customization is also possible with the brushless DC motor.

• Other pumps

In a decarbonized society and the development of new energy, there are many technical challenges that conventional gas pumps cannot adequately address. We believe that the KNF process pump, with its features listed below, can assist in solving our customers' technical challenges. Main features of the KNF process pump: - Contamination-free - A wide range of gas contact materials - Pressure-specific design with a maximum allowable discharge pressure of 1.2 MPa - Vacuum-specific design - Leak-tight design - Long lifespan design - Explosion-proof specifications (optional IECEx / ATEX) - Heat-resistant specifications with gas temperatures up to 240°C (optional) - Weather-resistant coating (optional)

• Special Pump