FUJIKOKI Co.,Ltd. Product Lineup

At Fuji Koki, we delivered exhaust gas treatment plant equipment for the wastewater sludge incineration facility. We installed a bag filter, quicklime supply system, activated carbon supply system, incineration ash bunker, fly ash bunker, and control panel. We solve the challenges faced by our customers in their manufacturing processes and the hurdles to be cleared during new construction through plant engineering. Please consult us if you require our services. 【Details of Achievements】 ■Area: Shikoku ■Content: Exhaust gas treatment plant equipment from the incineration furnace ■Equipment Specifications: Exhaust gas treatment 175 tons/day *For more details, please refer to the related links or feel free to contact us.

• Gas recovery/treatment equipment

This is an introduction to the achievements of reducing weight, increasing efficiency, and saving space in the FRC packing operation by delivering the Fcon Auto Packer. To fill 50 bags per hour, it was necessary to weigh 1000 kg in about 35 seconds, which required the combination of a cut gate and a screw feeder. The operator is positioned away from the loading area, and since dust is being collected during the loading process, the risk of inhaling dust is minimized. 【Equipment Overview】 - Raw materials accumulated in the service hopper are fed into the hopper scale for weighing. - Weighing is done up to 980 kg with the cut gate, and the remaining 20 kg is precisely weighed using the screw feeder to ensure accuracy. - The operator sets the FRC onto the arm. - The arm moves to the opposite side via a turntable, connects with the hopper scale, and feeds into the FRC. - The fed FRC is moved towards the operator side, and the FRC opening is removed. - It is transported via a slat conveyor and removed using an overhead crane. *For more details, please refer to the related links or feel free to contact us.*

• Other filling machines

This is an introduction to our achievements in delivering high-concentration air transport equipment for quicklime at Fuji Koki. Quicklime can be reactive, and with conventional low-concentration air transport, when transporting in high humidity conditions such as rainy weather, the moisture in the air reacts with the quicklime, leading to a decline in quality. This equipment allows for transportation without compromising quality by using dry compressed air. 【Project Overview and Challenges】 - After sieving and classifying the existing grinding line (-2mm), it branches off with a positive and negative screw conveyor to transport to a newly installed 100m³ silo using high-concentration air transport. - Since quicklime easily reacts with moisture to become slaked lime, the air used for high-concentration air transport is completely dehumidified. *For more details, please refer to the related links or feel free to contact us.

• Powder Transport Equipment
• Other conveying machines

This is an introduction to our achievements in reducing drying time and improving firing efficiency through the delivery of lime (stone) receiving, transportation, and storage facilities. Before the installation of the equipment, the stones were stored in a pile, which led to high moisture levels during rainy weather, resulting in the use of extra fuel and time for drying. By storing the stones in a covered silo for more than a day, the moisture levels decreased, leading to improved productivity. 【Project Overview and Challenges】 ■ Receiving lime (stone) from trucks and storing it in a corrugated silo ■ The stored lime (stone) is discharged from the silo and transported to each furnace (drying furnace and firing furnace) ■ Each silo stores stones sorted by size *For more details, please refer to the related links or feel free to contact us.

• silo
• Other conveying machines

This is equipment for dissolving pulp blocks in water and feeding them into a mixer. It was necessary to feed three blocks of pulp every ten minutes into the pulper, which meant that the operator was tied up with that task. After the installation, by stocking 12 blocks, the operator was able to perform other tasks for about 40 minutes. Additionally, by using a traverser to install a stock conveyor in the available space of the factory equipment, we contributed to minimizing the installation space. 【Project Overview and Challenges】 ■ Receive pulp blocks with a forklift, stock 12 blocks, and sequentially feed them into the pulper ■ Mix water and pulp in the pulper to create a slurry ■ Store the slurry as a primary stock and supply it according to the demands from the mixer *For more details, please refer to the related links or feel free to contact us.

• Other inserting and inserting machines
• Other factory equipment and parts

This is the manufacturing equipment for PVC compounds used in wire insulation. The user produces a variety of wires, and since the raw material formulations differ for each type, they have installed input boxes corresponding to each raw material and use several types of scales with different shapes. As a result, all weighing tasks have been automated, eliminating formulation errors. 【Details of Achievements】 ■ Customer Name: Fuji Electric Wire Industry Co., Ltd. ■ Area: Gojō City, Nara Prefecture ■ Raw Materials Handled: Wire manufacturing ■ Content: PVC compound manufacturing line for wire insulation *For more details, please refer to the related links or feel free to contact us.

• Other processing machines

We have handled the mechanical design, electrical design, installation work, and piping work for the conical dryer and its ancillary equipment. In the case of a standard conical dryer, we could not meet the height constraints of the installation location. However, due to the small angle of repose of the raw materials, we designed a special shape with an elongated cylindrical section to secure the capacity. Since the large main body is a rotating device, we surrounded it with a safety fence and installed an interlock system to allow work on the machine side only when it is stopped. 【Project Overview and Challenges】 ■ Automatically stop the main body at a fixed position and receive raw materials from the receiving hopper. ■ Manage the flow rate of the chemical solution and supply the necessary amount to the conical dryer. ■ Supply the heat medium to the dryer jacket to heat the raw materials. ■ Stir and dry by rotating the main body itself. *For more details, please refer to the related links or feel free to contact us.

• Drying Equipment
• Heating device
• Mechanical Design

We would like to introduce our achievements in supplying "drum flakers" to Ohnai Shinko Chemical Industry Co., Ltd. As the drum flakers from another company became outdated and required replacement, we proceeded with the update after confirming the capacity and product quality using our single drum testing machine at our testing center. We proposed an auxiliary roll to adjust the film thickness, which was not present in the existing equipment, and it was adopted without increasing the size of the equipment. 【Case Overview】 ■ Area: Fukushima Prefecture ■ Raw Material Handled: Rubber aging inhibitors ■ Content: Cooling and solidifying high-temperature molten materials ■ Equipment: Model SDF-5.6 ■ Processing Capacity: 330 kg/h ■ Scope of Responsibility: Mechanical design, electrical design, installation work, and piping work for the drum flaker *For more details, please refer to the related links or feel free to contact us.

• Crusher

We would like to introduce our company's achievements in the "concentrator repair work." A concentrator from another company had aged and required repairs, so we conducted an investigation of the actual equipment and designed a replaceable solution. The existing machine showed significant wear on the outer circumference of the blades, and repairs for repeated steam leaks had been carried out. Raw materials are supplied into the concentrator, and concentration is performed while transporting by rotating the disk blades. The condenser in the exhaust line condenses and recovers evaporated moisture, allowing for a reduction in the size of the exhaust fan. [Case Overview] ■ Raw Material Handled: Dewatered Sludge ■ Content: Concentration of Dewatered Sludge ■ Equipment: Model FDD-900 ■ Processing Capacity: 720 kg/h (Moisture Content 90% → 40%) ■ Scope of Work: Mechanical design, electrical design, installation work, and piping work for the concentrator (disk dryer) and auxiliary equipment ■ Saturated steam from the steam boiler is supplied to the concentrator jacket and disk blades to heat the raw materials. *For more details, please refer to the related links or feel free to contact us.

• Concentration Equipment

Here are the delivery results for "building material raw material equipment." We were involved in the factory layout planning and raw material process design for the construction of a new factory. We produce a wide variety of building materials, and the composition of raw materials varies for each type. In particular, fiber-based raw materials have a low specific gravity, making it difficult to achieve accuracy with weighing instruments. They also tend to entangle during discharge, so we installed a special discharge mechanism. We automated all weighing operations to eliminate mixing errors. [Case Overview] ■ Area: Overseas ■ Content: Raw material process for a building material manufacturing factory ■ Weighing powder and fiber raw materials and feeding them into a mixer ■ Adding liquid raw materials and mixing them in the mixer ■ Installed several types of weighing instruments according to each raw material *For more details, please refer to the related links or feel free to contact us.

• Powder Conveyor Device

We would like to introduce our delivery record of the "shelf-type vacuum dryer." Raw materials are filled into the trays of the shelf-type vacuum dryer and dried according to a predetermined operating program. Hot water is supplied from the hot water tank to the drying shelves to heat the raw materials. Stainless steel partition plates are installed in the main body of the dryer, designed to facilitate easy construction of the product room and machine room. It is possible to maintain hygiene in the product room with internal cleaning only. 【Case Overview】 ■ Area: Toyama Prefecture ■ Handled Raw Material: Pharmaceuticals (wet powder) ■ Content: Vacuum drying of wet powder ■ Equipment Specifications: Model VSD3-3/10 (currently VSD-15.09-N11) ■ Scope of Responsibility: Mechanical design, installation work, and piping work for the shelf-type dryer and ancillary equipment ■ Drying is performed by lowering the boiling point through vacuum extraction in the dryer using a vacuum pump. *For more details, please refer to the related links or feel free to contact us.

• Drying Equipment

We would like to introduce our achievements in "grate modification" for a major ceramic siding board manufacturing company. The existing grate installed in the hopper was frequently clogging, so we replaced the grate. We changed the installation method of the vibration to a system where the vibration is directly transmitted to the coal. By installing the vibrator directly on the grate, the vibration is transmitted to the coal, eliminating adhesion. Additionally, the noise levels have decreased. 【Case Overview】 ■ Content: Coal receiving hopper and grate for power generation boiler ■ On rainy days, people were poking the coal to drop it, causing trucks to wait in line and creating congestion. ■ The grate size was changed to 150×100 to make it easier for the coal to drop (no impact on downstream equipment). *For more details, please refer to the related links or feel free to contact us.

• Powder Conveyor Device

We would like to introduce our achievements in supplying "shelf-type vacuum dryers" to chemical manufacturers. Raw materials are filled into the trays of the shelf-type vacuum dryer and dried according to a predetermined operating program. Hot water is supplied from a hot water tank to the dryer shelves to heat the raw materials. Due to the low boiling point of the recovered solvent, it was considered that the condensed solvent could re-evaporate in the secondary side of the recovery tank, leading to a decrease in recovery rate. To address this, we implemented a strategy to prevent re-evaporation by adding a water-cooled full jacket to the solvent recovery tank, maintaining a low temperature below the boiling point. 【Case Overview】 ■ Content: Vacuum drying of raw materials in a shelf dryer and recovery of solvents contained in the exhaust ■ Scope of Responsibility: Mechanical design, installation work, and electrical design of the shelf dryer and auxiliary equipment ■ Drying is performed while lowering the boiling point by evacuating the dryer chamber with a vacuum pump ■ A condenser in the exhaust line condenses and recovers the solvent contained in the evaporated gas *For more details, please refer to the related links or feel free to contact us.

• Drying Equipment

We would like to introduce our achievements in supplying "dust collection equipment for waste acceptance facilities" to the Osaka Bay Wide Area Coastal Environmental Improvement Center. Due to the large size of the dust collector exceeding transportation limits, it was necessary to divide it in the width direction. Because the filter cloth is long, any misalignment of the hole positions could potentially lead to reduced backwash discharge effectiveness and damage to the filter cloth. Therefore, we carefully processed the holes in the injection pipes. 【Case Overview】 ■ Area: Hyogo Prefecture ■ Content: Dust prevention equipment during loading onto marine transport vessels ■ Scope of Responsibility: Renewal work due to the aging of existing dust collection equipment ■ Large dust collector measuring 8600L x 4670W x 12000H (Filter area: 1350m²) ■ Changed the discharge method from shaking type to pulse jet type *For more details, please refer to the related links or feel free to contact us.

• Dust collector

We would like to introduce our achievements in supplying the "Conical Dryer" to Muromachi Chemical Co., Ltd. The raw materials are filled into the dryer and mixed and dried by rotating the main body. Hot water is supplied from the hot water tank to the dryer jacket to heat the raw materials. After the hot water heating is completed, water is supplied to the hot water line for dilution, allowing for a rapid decrease in temperature within the jacket through the designed piping. 【Case Overview】 ■ Area: Fukuoka Prefecture ■ Raw Materials Handled: Pharmaceuticals (wet powder) ■ Content: Vacuum drying of wet powder ■ Equipment: Model VCD-1000 ■ Processing Capacity: 600L/batch ■ The condenser in the exhaust line condenses and recovers the solvent contained in the evaporated gas. *For more details, please refer to the related links or feel free to contact us.

• Drying Equipment

We would like to introduce our achievements in supplying the "Alumina Transport System" to Arumatis Co., Ltd. This system receives alumina raw materials in bulk bags, temporarily stores them in an intermediate tank, and then transports and supplies them stably to the manufacturing plant. By generating a swirling flow in the long horizontal piping, we have achieved stable transport by preventing the powder from settling. 【Case Overview】 ■ Area: Iwakuni City, Yamaguchi Prefecture ■ Handled Raw Material: Alumina ■ Equipment - Low Concentration Air Transport (Pneuma) - High Concentration Air Transport (Pow Pump) ■ Efficiency was improved by switching to air transport methods. *For more details, please refer to the related links or feel free to contact us.

• Powder Conveyor Device

We would like to introduce our achievements in delivering "tire shredders" to Kokusai Shokai Co., Ltd. We import shredders that meet the needs of tire recycling companies and complete them as a plant at our company. Even after the shredders are operational, we provide comprehensive support, including procurement of maintenance parts and responding to customer requests and inquiries. 【Case Overview】 ■ Product Type: Recycling processing of waste tires ■ Content: Shredding of waste tires ■ Scope of Responsibility: Establishment of production equipment ■ Procured tire shredders from Barclay Roto-Shred in the United States *For more details, please refer to the related links or feel free to contact us.

• Crusher

We would like to introduce our delivery achievements of the "Board Recycling Equipment." We coarsely crush scraps and defective boards, and then finely grind them to a state where they can be reused as recycled materials. For fine grinding, we use equipment with high classification accuracy to ensure there is no impact on the product. 【Case Overview】 ■ Content: Equipment for reusing scraps and defective boards ■ Since coarsely crushed materials have large particles that can cause jams, we have adopted a double damper ■ Air velocity is set according to the particle size of the crushed material ■ As the customer's required fine grinding size was 25–80μm (d50), we have adopted air classification with a separator ■ It is easy to change the classification point *For more details, please refer to the related links or feel free to contact us.

• Fine grinding machine
• Other Recycling

This is a record of the delivery of "waste gypsum recycling equipment" to Tokuyama Chiyoda Gypsum Co., Ltd. By crushing waste gypsum board and separating it from paper, we produce gypsum powder, which undergoes calcination and crystallization processes to improve its crystal structure. Based on the customer's waste gypsum board recycling technology, we carried out the entire layout, equipment design, manufacturing, installation work, and trial operation of the equipment. 【Case Overview】 ■ Area: Hokkaido ■ Raw materials handled: Interior materials for construction ■ Content: Waste gypsum board recycling processing ■ Scope of responsibility: New production equipment installation ■ Equipment that enables 100% recycling, whereas previously only about 10% could be mixed ■ Contributing to SDGs initiatives by recycling waste gypsum generated from home renovations and demolitions *For more details, please refer to the related links or feel free to contact us.

• Powder Conveyor Device
• Other Recycling

This is a record of the delivery of an "automatic flexible container filling device" to Green Cycle Co., Ltd. It is a comprehensive system that handles the waiting bags for recycled materials, bag filling, and the waiting of packed bags. We were able to provide excellent equipment that meets the user's needs in terms of safety and labor-saving. 【Case Overview】 ■ Area: Aichi Prefecture ■ Type of Products: Recycling of used waste electrical appliances (4 items) ■ Content: Labor-saving for filling recycled materials into flexible container bags ■ Scope of Responsibility: New installation and relocation of recycling equipment ■ Empty flexible container bags can be quickly set up with a dedicated hook that does not require tools ■ The transport line operates unmanned, so safety curtains are essential for safety reasons *For more details, please refer to the related links or feel free to contact us.

• Other filling machines
• container

We would like to introduce our achievements in supplying "biomass fuel transport equipment" to Toyo Engineering Corporation. We undertook the comprehensive construction of the equipment design, manufacturing, installation work, and trial operation for the acceptance and transport facilities of biomass fuel at the biomass power plant. We will continue our efforts towards the utilization of renewable energy, starting with biomass power generation. 【Case Overview】 ■ Area: Niigata Prefecture ■ Product Type: Biomass Power Plant ■ Content: Construction work for Niigata Higashi Port Biomass Power Plant ■ Scope of Responsibility: New power generation equipment installation *For more details, please refer to the related links or feel free to contact us.

• Other conveying devices

We would like to introduce our achievements in supplying "raw material blending equipment" to a major ceramic siding board manufacturing company. We received an order for the design and production of a complete set of blending and mixing equipment for raw materials (powder and liquid). We utilized some existing lines that could be repurposed and successfully established the new equipment. Typically, placing the weighing instruments on the upper floor of the mixer makes it challenging to secure installation space for the weighing instruments when dealing with a variety of raw materials. However, by installing the weighing instruments under each silo, we created more space on the upper floor of the mixer. Additionally, having the weighing instruments on the ground floor made calibration work easier. 【Case Overview】 ■ Client: Major ceramic siding board manufacturing company ■ Content: Siding board production ■ Compacting of blending equipment ■ Integration of weighing instruments and air transport hoppers *For more details, please refer to the related links or feel free to contact us.

• Powder Conveyor Device

This is a "high-density air transport system" for a cement mixture (90% cement and 10% additive). In the existing low-density air transport system, a maximum of 20 tons per hour could be transported with a pipe diameter of 150A. However, by installing two powder pumps and using a pipe diameter of 125A for alternate transport, it became possible to transport 30 tons per hour. As a result, it became possible to transport 50 tons per hour to silo A and 60 tons per hour to silo B. [Case Summary] ■ Transport capacity: 30 tons per hour (continuous transport) ■ Transport distance: Silo A 80m, Silo B 40m ■ Transport method: High-density air transport ■ Two powder pumps were installed ■ It became possible to transport 50 tons per hour to silo A and 60 tons per hour to silo B *For more details, please refer to the related links or feel free to contact us.

• Other pumps
• filter

We would like to introduce our delivery achievements of the "Raw Material Automatic Transport System." Previously, materials were received in paper bags and supplemented through manual input boxes. However, we have introduced a bulk receiving and automatic distribution system using FIBC (Flexible Intermediate Bulk Container). This has eliminated the need for individual supply to each line, reducing the burden on operators. Additionally, centralized management has made it unnecessary to aggregate usage amounts. 【Case Overview】 ■ Raw Material: High Molecular Absorbent Polymer ■ Receiving Method: Knife-equipped FIBC opener ■ Transport Method: High Concentration Air Transport ■ High Molecular Absorbent Polymer absorbs moisture and deliquesces when exposed to outside air, so it is transported using dehumidified compressed air. ■ Low-speed transport prevents powdering. *For more details, please refer to the related links or feel free to contact us.

• Dust collector
• valve
• Other conveying devices

We would like to introduce our delivery achievements of the "Suction-type Air Transport System." By generating a negative pressure of approximately -10 to -35 kPa with a suction blower, we transport powders and granules through piping. At the destination, we efficiently separate air and powder using cyclones and bag filters. Since we adopt a suction method, we can safely mix air and powder without generating dust at the source. 【Case Overview】 ■ Efficiently consolidates and transports from multiple suction points, such as wide areas, low locations, and inside containers, to a single location. ■ Safely mixes air and powder without generating dust at the source. *For more details, please refer to the related links or feel free to contact us.

• Powder Conveyor Device

We would like to introduce our delivery achievements of the "Low-Pressure Pneumatic Conveying System." Utilizing the air from transport blowers that generate pressures of approximately 10 to 50 kPa, we transport powders and granules through piping. By adjusting the pressure settings, we can flexibly change the transport conditions, accommodating various conveying needs. 【Case Overview】 ■ Transport Distance: 10 to 100m (up to 450m maximum) ■ Transport Capacity: 0 to 20t/h ■ Transport Method ・Continuous (Transport Pressure 5 to 25 kPa) ・Batch (Transport Pressure 25 to 50 kPa) *For more details, please refer to the related links or feel free to contact us.

• Powder Conveyor Device

We would like to introduce our delivery achievements of the "High-Pressure Pneumatic Transport System." The tank filled with materials is pressurized with compressed air, and the materials are transported through the piping by airflow. There is minimal fragmentation of the powder, achieving stable transport while maintaining product quality. By pressurizing the tank for stable transport, we have enabled long-duration continuous transport. 【Case Overview】 ■ Prevents impact and wear of the powder due to slow transport speed ■ Maintains quality while suppressing fragmentation ■ Supports high-concentration transport with increased solid-gas ratio ■ Long-distance and large-volume transport is made easy with pressure adjustment ■ Simple management of transport volume with batch transport method *For more details, please refer to the related links or feel free to contact us.

• Powder Conveyor Device

To keep factories that handle dust clean, a central cleaner is necessary. Conventional central cleaners require a large installation space. The Big Vacuumer minimizes the installation space and has a simple structure as it directly feeds into a bulk bag.

• Powder Conveyor Device

We solve line trouble issues with easily agglomerated materials. By installing under the tank, we discharge while crushing the materials.

• Crusher

A device that sucks a small amount of samples from hoppers and shoots them into bottles. Applications: rice, resin pellets, various powders. It is suctioned with compressed air.

• Other conveying machines

The "Vacuum Conical Dryer" is a product that gently mixes raw materials by rotating a conical-shaped container in a vacuum state and dries them through heat transfer from the jacket. It has no stirring blades inside, making it easy to load and unload raw materials, and it can completely discharge the entire amount. By adopting a mechanical seal, it allows for low-temperature drying under high vacuum conditions. Additionally, the raw materials do not undergo thermal decomposition or oxidation. 【Features】 ■ Gentle rotational mixing allows for drying of raw materials that are sensitive to wear without damaging their shape. ■ The sealed structure prevents contamination of the raw materials. ■ Fully automatic operation is possible with the adoption of an automatic feeding and discharging device and a fixed position stopping device. ■ The use of a condenser makes it easy to recover solvents. ■ Production with resin lining or special materials is also possible. *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

When introducing a powder with poor fluidity into the tank, the discharge is not stable. By installing a rotary scraper, we can prevent bridges and rat holes that cause discharge problems. It has a simple structure, making cleaning and maintenance easy. Additionally, due to its robust construction, it is less prone to failure.

• Powder Supply Device

The "Tire Shredder" crushes tires using a primary shredder that cuts (waste) tires into strips approximately 100mm wide, and a secondary shredder that cuts the material from the primary shredder into approximately 50mm squares. Through a sales partnership with Berkeley Corporation in the United States, our company serves as the sales representative in Japan. 【Features】 ■ Capable of large-size shredding ■ Maintains shredding performance and reduces maintenance costs ■ Space-saving and requires fewer personnel for large-scale shredding *For more details, please refer to the external link page or feel free to contact us.

• Crusher

We would like to introduce our bug filter, the "NP NM UP series." The "NP type" features a square dust collector body, allowing for flexible adjustment of the fan's discharge direction depending on the installation location. With a data system in place, it operates automatically while consistently choosing energy-saving options. Additionally, it allows for easy modification of settings based on usage conditions. We also offer high-performance "NM/NU type" fans and the "UP type" as part of our lineup. 【Features (NP type)】 ■ The fan's discharge direction can be freely changed ■ Space-saving with a short installation period ■ The slower the dust rises, the greater the dust removal effect ■ Compact design with an integrated fan, requiring a small installation area and easy setup ■ The silencer is integrated with the main unit, making it a quiet dust collector *For more details, please refer to the PDF materials or feel free to contact us.

• Dust collector

If various raw materials in a FIBC (Flexible Intermediate Bulk Container) are removed incorrectly, it can cause dust generation. This is particularly concerning if the powder contains hazardous substances such as pigments, as it can threaten the health of workers. The explanatory document "Methods for Discharging from FIBCs" provides guidance on appropriate discharge methods for quicklime, salt, and pigments, as well as key points to consider when selecting FIBC discharge equipment, illustrated with diagrams. [Contents] ■ Importance of Choosing FIBC Discharge Methods ■ Appropriate Discharge Methods for Different Raw Materials ■ Key Points for Selecting FIBC Discharge Equipment, etc. *If you would like a copy of the explanatory document "Methods for Discharging from FIBCs," please feel free to download the PDF or contact us.

• Other packaging machines

The 'Silo and Bug Filter' is a mechatronic air vent that catches failures in electromagnetic valves and accurately indicates the repair locations. It is widely used for pressure reception. [Features] ■ SPV Type: Air Vent Bug Filter (Cartridge Type) - Capable of handling a large airflow while being compact - Requires less installation space, reducing installation time and contributing to lower running costs - Adopts a jet pulse injection method for stable suction airflow ■ SP Type: Continuous Operation Bug Filter - The drip-proof cover is all-weather, preventing rainwater leakage during storms and heavy snowfall - Suitable for locations requiring continuous air venting ■ DC Type: Intermittent Operation Bug Filter - The drip-proof cover is all-weather, preventing rainwater leakage during storms and heavy snowfall - Ideal for air venting during short transport times *For more details, please refer to the PDF materials or feel free to contact us.

• Dust collector

The "PowPump and Mini Pneuma" is a compactly designed pneumatic conveying and small suction-type pneumatic transport device for powders and granules. 【Features】 < PowPump > ■ Can be installed anywhere as long as there is a power source and air source ■ High-density transport with a small amount of compressed air ■ No damage, separation, or foreign matter contamination of transported materials due to high-density low-speed transport ■ Easy separation of solids and gases at the destination. Can be processed with a small back filter ■ Capable of sending to multiple locations ■ Fully automatic operation with a single switch < Mini Pneuma > ■ Continuous suction transport is possible ■ Suitable for air transport of powders and granules over distances of 20 to 30 meters ■ Compact design ■ Automatic measurement and cumulative measurement of suction volume ■ Simultaneous suction is possible ■ Automatic cleaning method using high-pressure air * For more details, please refer to the PDF document or feel free to contact us.

• Powder Conveyor Device

The "Pneumatic Conveyor" is a device that transports powder and granular materials to a designated location using the energy of air. With our excellent experience and accumulated design calculation data, we can meet your factory's needs for labor-saving, rationalization, and dust-free operations with this suitable device. 【Features】 ■ Simply install the transport pipe from the starting point to the endpoint ■ Capable of transporting to locations that conventional devices cannot reach ■ Allows for relatively free selection of routes, enabling rational layout of the entire facility ■ Maintains airtightness, unaffected by weather or surrounding pipeline conditions *For more details, please refer to the PDF materials or feel free to contact us.

• Other processing machines

This catalog is a comprehensive catalog of conveyors for powder and granular materials handled by Fuji Koki Co., Ltd. We introduce the structure and features of the dust-free transfer machine "Screw Conveyor," as well as the ace of bulk powder and granular material transport, the "Air Slide Conveyor" and "Flow Conveyor," along with diagrams. Please make use of this for selecting products. [Contents] ■ Screw Conveyors U-trough type Pipe casing type SCZ type screw conveyor ■ Air Slide Conveyor ■ Flow Conveyor *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• Powder Conveyor Device

The "bucket elevator" is a well-regarded conveying device for the vertical transport of bulk materials. We offer three discharge methods. The "centrifugal discharge method" features buckets mounted at regular intervals, which scoop up bulk materials at the lower end and release them at the upper end through centrifugal force when they rotate. Additionally, we provide the "induced discharge method" and the "complete discharge method." Please choose according to your application. 【Features (Centrifugal Discharge Method)】 ■ Buckets are mounted at regular intervals ■ Scoops up bulk materials at the lower end and releases them at the upper end through centrifugal force when rotating ■ Generally the most commonly used type ■ Not suitable for easily crushable bulk materials ■ Ideal for paddy, grains in general, various seeds, sugar, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Other conveying machines
• Powder Conveyor Device

This product is a rotary valve with a separate motor and direct connection type. The face height is low, allowing for use in tight spaces. The "M separate type rotary valve" features a casing, blade, and rotor that are precisely machined, ensuring good airtightness. The main casing is made of SC material as standard, but stainless steel and more wear-resistant products are also available. Additionally, we offer "direct connection type" and "pumping type" in our lineup. 【Features (M separate type)】 ■ Low face height allows for use in tight spaces ■ Casing, blade, and rotor are precisely machined for good airtightness ■ Shaft seals use gland packing or oil seals depending on the application ■ The rotor is available in three types: UG, FC, and SUS, making interchangeability easy ■ A plug for internal purging is provided as needed *For more details, please refer to the PDF materials or feel free to contact us.

• Other conveying machines
• valve

The "Fcon Auto Packer" is a high-performance assembly machine developed to perform bagging operations, which traditionally required 2 to 3 people, with greater accuracy and allowing a single operator to work. We offer three different models. The receiving chute is movable, enabling the installation of the Fcon Pack at a low position. Additionally, the built-in weighing machine allows for automatic weighing and filling. 【Features】 ■ Three major labor-saving functions - More accurate weighing - Faster bagging rate per hour - Operable by a single person ■ Easy installation of the Fcon Pack ■ Accurate filling quantity *For more details, please refer to the PDF materials or feel free to contact us.

• Filling and bottling machines

The "Fukon Opener" is a bag-opening machine that allows for the hygienic and safe unloading of bags, transforming the dangerous and difficult task of bag opening into a light-duty job that can be performed even by women. By adding a rotary valve and screw conveyor for quantitative supply, as well as a vibrating feeder to this product, we can complete a quantitative supply system from Fukon, significantly contributing to further labor-saving achievements. 【Features】 ■ Enables hygienic and safe execution of the dangerous and difficult Fukon bag-opening task ■ Achieves light-duty operation ■ Supported at four points by large vibration-damping rubber ■ Large one-touch opening for bag opening ■ Height of the frame can be adjusted according to the discharge system *For more details, please refer to the PDF materials or feel free to contact us.

• Other powder equipment

The "Central Cleaner" can be used as a large vacuum cleaner in factories and similar environments. Install a powerful dust collector in an appropriate location, either outdoors or indoors, and set up the suction pipes to the necessary areas inside. Provide an inlet for the flexible cleaning hose. After that, you can clean with the capacity of a household vacuum cleaner. It is also possible to clean several areas simultaneously. 【Features】 ■ The main body of the cleaner uses a top-extracting filter, and the filter replacement can be done from the outside. ■ There is no deterioration of the indoor environment due to noise or exhaust. ■ Simultaneous cleaning of several areas is possible. ■ Cleaning is efficient by simply inserting the hose into the inlet valve. *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Vacuum Cleaners

The "Bag Filter" is a large dust collector that completely eliminates emitted dust and achieves easy operation through simplified structure. Using high-pressure air, it performs cleaning for each row. The cleaning is carried out in fully automatic operation while always selecting energy-saving options, ensuring peace of mind. 【Features】 ■ Completely eliminates emitted dust and achieves easy operation through simplified structure ■ Cleaning is performed in fully automatic operation while always selecting energy-saving options ■ Airflow is displayed whenever needed ■ Abnormal checks of the injection valve can be done from the ground ■ Removal performance of harmful components *For more details, please refer to the PDF materials or feel free to contact us.

• Dust collector