日精 List of Products and Services

【Features】 ○ High performance ○ High quality ○ Global compatibility ○ Low price ○ Stable supply * Samples are available upon request. Please feel free to contact us.

• RFID/IC tags
• IC tag reader/writer

The long-selling DAGE4000 has been newly transformed. You can also use the 4000 load cell. It is a suitable device for manual pull and shear production bond tests, and it can be configured for simple wire pull tests, as well as upgraded for ball shear, die shear, ball pull, or tweezer pull/peel tests. Please feel free to contact us when you need assistance. 【Features】 ■ By replacing the load cell, it can accommodate various joint strength tests such as pull tests and shear tests. ■ The load cell replacement can be done in under 10 seconds using a one-touch method. ■ The tool touch-up accuracy during ball shear tests can be measured with high precision of ±1μm. ■ Device calibration can be easily performed by users using standard weights and fixtures, and the repeatability of the device can also be verified using standard weights. * For more details, please download the PDF or feel free to contact us.

• Tester

This product is a device suitable for quality control of semiconductors and electronic components for automotive applications in high-density mounting, capable of various bonding strength tests with just one unit. With a rich array of options, it allows for combinations tailored to the customer's intended use, enabling the acquisition of high-precision and highly reproducible data. Please feel free to contact us when you need assistance. 【Features】 ■ A versatile bond tester that can accommodate various bonding strength tests with one unit by exchanging load cells. ■ Compatible with MFC (Multi-Function Cartridge) that incorporates three types of sensors. ■ A variety of camera options for measurement observation are available. ■ The control software "Paragon" allows for the association and storage of photos of failure modes and measurement videos with the measurement data by using the camera options. *For more details, please download the PDF or feel free to contact us.

• Tester

The S.M.A.R.T. Kit is a non-destructive design machine equipment monitoring assistance system that includes a compact IoT data collector, allowing for easy collection of vibration, temperature, and humidity data. Users can monitor the operating conditions of various equipment, such as motors, intuitively and quickly in real-time using the "DecayRate," a unique vibration fluctuation index developed by SmartTag, to check the health status of the equipment. Additionally, it helps determine whether issues in the manufacturing process or production site are affecting product quality, serving as an excellent support tool for early diagnosis of machinery and production testing. 【Features】 ■ Quickly assess equipment condition using the unique vibration fluctuation index "DecayRate" built into the FogBox ■ Compact, lightweight, and easy to install ■ Equipped with rich IT functionalities, offering various features at no additional cost ■ Integrated three-in-one sensor for vibration, temperature, and humidity ■ Wireless connectivity via Bluetooth BLE and Wi-Fi *For more details, please download the PDF or feel free to contact us.

• Other security and surveillance systems

Wireless Extender HDMI & USB Type-C - Transmitter (Compact Mate5: C-1) - Receiver (Compact Mate2: R-1) - Supports online meetings and video conferences wirelessly through wireless transmission devices - Transmission uses the WiFi 5GHz band to reduce communication congestion - Resolution: 1920×1080 - Power supply: DC 5V 1A - No app or additional software required - Wireless transmission distance is 1m to 20m (please note that indoor distance may vary due to room structure) - Certified with Technical Compliance Mark

• Other cable related products

"HUMOFITⓇ" softens at human body temperature (above 28°C) and provides a unique sense of adhesion upon contact. This material contributes to enhancing the value of items that come into contact with people in various ways, such as improving body pressure distribution and enabling free sizing of products. By using this material, the following value enhancements can be expected. *For more details, please download the PDF or contact us.*

• plastic

The XS series is a compact, high-resolution automatic X-ray inspection system designed for high-performance and high-speed inspection of semiconductor samples, wire bonding, single/multi-panel PCB assemblies, and samples on trays. It is capable of inspecting applications ranging from component-level inspections to medium-sized SMT boards.

• X-ray inspection equipment

The Quadra7 Pro has further improved the conventional maintenance-free shielded transmissive type X-ray tube and is equipped with the industry's first dual mode. It can accommodate a wider range of applications, from power devices to wafer inspection, and by combining it with our latest generation Onyx flat panel developed in-house, it has further reduced noise and enhanced performance.

• X-ray inspection equipment

We would like to introduce the 'BM-3500SI', a micro ball mounting machine compatible with individual substrates, manufactured by Athlete FA. This product, designed for individual substrates, has been completed with optimized ball dispensing brushes to reduce ball consumption. By configuring flux printing and ball mounting with multiple units and implementing a two-step inspection and repair process, we have achieved a 1.5 times increase in UPH compared to the previous model. 【Features】 ■ Achieves compatibility with individual substrates ■ Configured with multiple units for flux printing and ball mounting, and a two-step inspection and repair process, achieving 1.5 times UPH compared to the previous model ■ Reduces ball consumption through optimized ball dispensing brushes ■ Delivers high performance *For more details, please refer to the PDF document or feel free to contact us.

• Circuit board processing machine

We would like to introduce the high-precision die bonder "AB-1000" manufactured by Athlete FA, which we handle. It achieves mounting accuracy of XY: ±5[μm], θ: ±1[deg] (±3σ). It is compatible with small and thin chips. It comes with calibration, traceability, and post-mount inspection functions. Please feel free to contact us if you have any requests. 【Features】 ■ Achieves high-precision mounting ■ Compatible with small and thin chips ■ Equipped with calibration function ■ Equipped with traceability function ■ Equipped with post-mount inspection function *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• Substrate transport device (loader/unloader)

The bonder "AB-1000" is complete. Achieved mounting accuracy (XY: ±5 [μm], θ: ±1 [deg] (±3σ)). Compatible with small and thin chips.

• Bonding Equipment

The "IP2030L (A4 size)" is an inkjet coating device for electronic devices that applies functional ink to wafers, sheets, glass, and resin substrates. This single unit can handle everything from experiments and prototypes to production, enabling high-resolution pattern coating. Additionally, you can choose from two types of models according to your application. 【Features】 ■ One unit for experiments, prototypes, and production ■ High-resolution pattern coating ■ Supports patterning, full-area, and partial coating ■ Extensive range of optional accessories *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

This product is a UV irradiation device. It is compact and reasonably priced, while thoroughly pursuing cost-effectiveness in "curing" (i.e., effectiveness). It is used in various fields such as research and development of semiconductors, resin materials, films, and adhesives. We also offer a fluorescent lamp type (note: this product uses LED lighting)! 【Features】 ■ UV irradiation is possible by changing the direction of the lamp ■ Compact and lightweight ■ Lamp life exceeds 20,000 hours ■ Easy operation with a liquid crystal screen *For more details, please download the PDF or feel free to contact us.

• Other semiconductor manufacturing equipment

"T-MCMA" is a current information diagnostic system that enables remote monitoring and diagnosis of the condition of rotating machinery. By developing the technology of current signature analysis, it can detect not only motor anomalies but also mechanical abnormalities such as unbalance and misalignment, as well as electrical abnormalities like insulation degradation and inverter issues, and deterioration of power transmission components such as gears, belts, and chains. Eight types of diagnostic parameters are set, and the condition of the rotating machinery is evaluated based on the parameter values calculated for each measurement. 【Features】 ■ Applicable regardless of the environment at the installation site of the rotating machinery, as current is measured in the electrical room. ■ Capable of diagnosing the specifics of anomalies occurring in the target rotating machinery. ■ Quantitative evaluation of the degree of anomalies based on parameter values. ■ If an anomaly is detected, our staff can support the investigation of the cause upon request. ■ Continuous monitoring is possible as measurements are conducted automatically. ■ Applicable to a wide range of rotating machinery, including general rotating machinery, low-speed rotating machinery, and high-pressure motors. ■ We also offer the "TM-CLOUD" service, which utilizes "T-MCMA" through the cloud. *For more details, please feel free to contact us.

• Other security and surveillance systems

We have a proven track record in a wide range of industries, including cosmetics, medical, and industrial applications.

• Brush
• Industrial Endoscope

We assist with custom lens design by designers with expertise in lenses. We provide integrated production from glass lens processing to polishing, surface coating, and lens assembly. We can produce from small lots of one piece to mass production of several thousand pieces, with a proven track record in medical devices, industrial equipment, and automotive parts. Lens assembly is conducted in a clean booth to prevent foreign matter contamination and ensure high-quality products. Additionally, we also handle the design and manufacturing of plastic lenses. - Proven track record in medical devices, industrial applications, and robotics - Integrated production from design to glass processing and surface coating - Capable of producing plastic lenses (up to tens of thousands of pieces) *For more details, please contact us.

• Glass

There is an increasing shift from hard trays to foam molded products for the shipping of electronic components, due to their excellent "lightweight" and "buffering capacity."

• tray
• container
• Other packaging materials

Proven results in a wide range of applications, including cosmetics, pharmaceuticals, and food.

• plastic

MID (Molded Interconnect Device) refers to plastic injection molded products with electrical circuit wiring that possess both mechanical and electrical functions. Its features include simplification of wiring between electrical components, miniaturization of devices through space-saving wiring arrangements, and increased design flexibility through direct implementation onto three-dimensional molded parts. It is increasingly adopted in wearable devices, automobiles, and small medical devices. We offer proposals for miniaturizing and thinning electronic devices, handling everything from molding to pattern design. **Advantages of MID:** - **Lightweight:** Directly drawing patterns onto plastic molded products eliminates the need for separate circuit boards and their screws, leading to weight reduction. - **Compactness:** It can be implemented in three dimensions, contributing to the miniaturization of components in a space-saving manner. - **Simplified Assembly:** Reducing the assembly labor for circuit module boards leads to higher precision. *For more details, please contact us.*

• Plating Equipment

The "CI Series" is a device that conducts visual quality inspections of individual bare chips stored in a chip tray, classifying them as good or defective. Detection examples include edge cracks, chipping, scratches, foreign matter adhesion, discoloration, etc. Using the standard multi-angle lighting, it is possible to set lighting conditions that capture various defect modes that appear on the product. This device is suitable for pre-shipment inspections by semiconductor bare chip manufacturers and contract manufacturers. Examples of target products include power devices, ICs, image sensors, and wafer chips for various sensors. <CI8000> - Six-sided inspection model (inspection of all six sides: front, back, and sides) - Fastest processing capability of 8000 CPH - Equipped with a stage that enables high-resolution inspections <CI200i> - Front and back inspection model - Space-saving by conducting surface inspection in the tray - Minimizes contact with the product, ensuring no damage - Equipped with a high-resolution inspection stage *For more details, please refer to the PDF document or feel free to contact us.

• Semiconductor inspection/test equipment

We want to implement an RFID system to improve operational efficiency, but it's difficult to do so due to budget and return on investment issues... We would like to introduce a simple package that can solve such concerns. Before introducing a feature-rich package or a scratch development system, it's recommended to first experience the convenience of RFID and identify operational issues. Understanding the voices from the field and operational challenges, and reflecting those in the solution implementation is advisable. It is also possible to calculate a real investment return, not just on paper. Additionally, depending on the business and operations, it may be possible to use the simple package in actual operations. We offer flexible support, including sample provision, lending, on-site demos, IC tag selection, and retail sales. We provide support from seven sales bases across the country, from Hokkaido to Kyushu, so please feel free to consult with us.

• IC tag

At Nichisei, we offer a one-stop service from procurement to printed circuit board assembly, sheet metal processing, and assembly. We accept contracts for the manufacturing of parts or finished products developed and designed by our customers, and we respond flexibly and seamlessly from prototype to small-batch production and mass production, including parts procurement. We connect and integrate the strengths of our various business locations across a wide range of fields, from consumer electronics to industrial equipment, and provide them to our customers in a one-stop manner. 【Our Strengths】 ■ We respond to customer needs for the manufacturing of various electronic products that require reliability, leveraging the knowledge and experience we have cultivated over many years. ■ We propose manufacturing solutions using our own FA products. *For more details, please refer to the PDF document or feel free to contact us.

• EMS

The "CD Dryer" is a conduction heating type liquid dryer that indirectly heats liquids through heat conduction from a heat source to perform drying. By using both sides of a thin disk as heat transfer surfaces, it can secure a large heat transfer area within a compact space. The dried material on the heat transfer surface is constantly scraped off by a scraper, allowing for stable high processing capacity. Additionally, the heat capacity of the disk in the heat transfer section is small, enabling operation to start in about 5 minutes after steam is introduced, even in large machines. 【Features】 ■ High performance ■ Compact (about 40% of the installation area compared to double dryers) ■ Energy-saving, high efficiency ■ Speedy ■ Process reduction *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

The "LI700E" is an appearance inspection device that conducts dimensional inspections such as terminal bending of IC packages, as well as defect inspections for scratches and foreign objects. It achieves automation of inspections in a compact space. Inspections are performed from the bottom of the product, checking the mold surface and terminal surface, followed by pass/fail judgment and sorting. 【Features】 ■ High-precision 2D & 3D dimensional measurement ■ Defect inspection ■ Compact and space-saving ■ Automatic health check function ■ Support for traceability data management *For more details, please refer to the PDF document or feel free to contact us.

• Microcomputer

The "Power Cycle Test Machine" from Quoltech is a product that integrates systems based on the experience and know-how gained from developing over 100 types of test systems through contracted testing from major automobile manufacturers and design developers. It is suitable for onboard devices and can handle high currents (1,800A). It incorporates all the achievements and expertise cultivated through more than 200 contracted tests annually. Additionally, the company has developed a dedicated transient thermal resistance measurement module for the Power Cycle Test Machine, enabling the measurement of transient thermal resistance during power cycle testing. This allows for the acquisition of more comprehensive information on device degradation by measuring transient thermal resistance based on a pre-set schedule during the power cycle test. Even after the introduction of the test machine, adding this option allows for functionality upgrades without wasting investment, so please feel free to contact us if you have any requests. *For more details, please refer to the PDF materials or feel free to inquire.

• Testing Equipment and Devices

Introduction of an evaluation kit ideal for those with no experience in handling sensor tags 【Features】 - Capable of measuring multiple temperatures and detecting water leaks - Available in two types: handheld or stationary - No application required for in-house wireless stations - Comes with a demo application for evaluation This kit can be considered for various applications such as cold chain and temperature environment management, predictive maintenance for temperature anomalies and water leaks in equipment, water leak testing for finished products like automobiles, and water leak detection for outdoor installations, as well as in medical and caregiving settings. Please consider utilizing the characteristics of RFID to measure in locations that have not been measurable before or in places where wired measurements are difficult!

• Other temperature and humidity measuring instruments

It is a model with a cable length of 5.5m that contains a main antenna and a sub-antenna within a single antenna case. It is a 2x2 MIMO antenna.

• Other network tools
• Wireless LAN
• Data Logger

Inside one antenna case, there are a main antenna and a sub-antenna, with cables for the main antenna and the sub-antenna extending out. This is what is known as a 2×2 MIMO antenna.

• Other network tools
• Wireless LAN
• Data Logger

Introducing the LTE antenna "FMM800W-4T-xM-BP." 【Features】 - Multi-band compatible (can be used in both 800MHz and 2GHz bands) - Standard stock available in 2.5m and 5m types - Can be installed on metal surfaces - No extension cable needed (10m and 15m long types also available) - Numerous achievements with technical compliance certification (TELEC) - For cases using two antennas with LTE, types are available that maintain the proper distance between antennas (2.5m and 5m types) We also offer long types of 10m and 15m, allowing use in areas with poor signal conditions by extending to areas with better signal conditions. (However, please note that the 15m type may be affected by attenuation.) *For more details, please contact us or download the PDF for more information.

• Other network tools

There are 3D cable diameters available in 2.5m and 5m models. The FMS5G-H2.5M-BP2.5D and FMS5G-H5M-BP2.5D have the same antenna pattern and use a cable diameter with a lower attenuation rate.

• Other network tools

The cable diameter of 2.5D has models with cable lengths of 2.5m and 5m.

• Other network tools
• Wireless LAN
• Data Logger

Antenna

• antenna

Small high gain. Dimensions: 36×36×0.4mm Weight: Approximately 1g or less Maximum gain: -1.04dBi Standard product cable length: 10cm Connector: U.FL-LP-066

• antenna
• Sensors

This is a conversion connector from U.FL-LP-066 to SMA-J with a cable length of 10 cm.

• Coaxial Connectors

●About the UTR Series ◆920MHz Band Reader/Writer ◆Both stationary and handheld types do not require a license registration as they are specific low-power radio station types (250mW) ◆Compliant with international standard ISO/IEC18000-63 and EPCglobal Gen2 ◆Available in circular polarization and linear polarization. 　*Measured with our tags at 250mW, reading over 5m ◆SDK available for separate purchase (for Microsoft ".NET Framework 4.0") 【Stationary Type】 ◆Communication with higher-level devices can be selected from four types: USB, TCP/IP, Bluetooth, Wi-Fi ◆Can operate as a standalone RFID reader/writer due to built-in antenna ◆Up to three external antennas can be connected ◆Stable multiple batch reading processing ◆Radio output can be adjusted in 1dB increments from the higher-level device. ◆Compatible with temperature sensor tags, LED tags, and electronic paper tags 【Handheld】 ◆Equipped with Bluetooth, WiFi, and USB communication ◆Can connect without regard to the higher-level OS ◆Includes buttons for increasing and decreasing radio output. Output adjustment is possible on the device ◆Radio output can be adjusted in 1dB increments from the higher-level device ◆Stable multiple batch reading processing

• IC tag reader/writer

Optimal solution for traceability compliance. By replacing labels and stamps with laser printing, it is possible to promote cost reduction and labor saving. Printing can achieve fine markings even in narrow spaces, allowing for the embedding of large amounts of data onto individual circuit boards. The "LMS-K500 Series" is an inline laser marking system that can be equipped with various laser markers suitable for different applications, including CO2 lasers, fiber lasers, and UV lasers. Equipped with a vision camera, it supports alignment functions, 2D code reading judgment, and input direction determination as standard features. In addition to Japanese, English, and Chinese, it supports multiple languages (global compatibility), making it easy and reliable to implement in overseas factories. Please feel free to consult us for custom solutions, such as for M-size and L-size circuit boards, double-sided printing, and integration with MES systems. 【Features】 ■ SDGs-oriented airless system ■ Fully electric cylinder (no air supply required) ■ Equipped with KEYENCE-made laser markers, image processing, and control PLC ■ Equipped with a 3D laser marker that can mark large areas with high quality *For more details, please check the catalog download.

• Laser marker

Amid various keywords such as promoting work style reform as a means of achieving DX, improving productivity, and addressing labor shortages, it has become increasingly difficult to manage items accurately with a limited number of people and resources. The "Tool Management System Utilizing RFID" is a system that allows for the management of equipment and tools to be done "by anyone," "easily," and "accurately" using RFID (IC tags). It enables reservation management, preventing double bookings. By reading the IC tags during check-out and return, any forgotten items are displayed in a list, helping to prevent accidents caused by leaving items behind. If the targeted tool cannot be found, it can be easily located using the search function. We will conduct interviews regarding the materials of the tools and equipment (metal, plastic, paper, etc.), usage locations (indoor/outdoor), and intended uses (high temperature, movable objects) to propose IC tags, reading devices, and systems tailored to your needs. We also conduct demonstrations by attaching IC tags to target objects at actual sites across the country for verification. We offer samples, rentals, and retail sales. We are flexible in accommodating initial proof-of-concept experiments and small starts.

• IC tag

Amid various keywords such as promoting work style reform, improving productivity, and addressing labor shortages as means to realize DX, it has become increasingly difficult to manage items accurately with a limited number of people and resources. The "Inventory Management System" enables accurate and rapid inventory management through the use of RFID tags. Additionally, it is possible to issue RFID tags while utilizing existing barcodes and QR codes! The processes for receiving and shipping can be completed simply by reading the RFID tags with a reader/writer. Why not transition from managing each item on paper to efficient inventory management using RFID from receiving to stocktaking to shipping? We will listen to the materials, usage locations, and purposes of the items to be managed and propose RFID tags, reading devices, and systems tailored to your needs. We also conduct demonstrations nationwide, where we attach RFID tags to items stored at actual sites in advance for verification. We offer samples, rentals, and retail sales. We are flexible in accommodating requests for pilot experiments and small starts. We provide support from seven sales locations across the country, from Hokkaido to Kyushu, so please feel free to consult with us.

• IC tag

The fiber output laser system "FOM system" enables high-quality soldering without contact using semiconductor lasers. Soldering with a very small beam spot can handle fine soldering that is difficult to achieve manually. It can be used for various soldering applications. Additionally, it supports resin bonding, allowing laser-based resin bonding that eliminates the need for adhesives, concerns about variations in application amounts, insufficient bonding strength, and overflow, enabling highly productive bonding. 【Features】 ■ Compatible with various solder supply methods ■ Suitable for soldering workpieces that are sensitive to heat and cannot undergo reflow processes ■ Capable of creating temperature profiles tailored to the characteristics of the soldering target ■ Handles fine soldering that is difficult to achieve manually ■ Supports resin bonding *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

The "BLESsystem" has achieved high-quality, damage-free fluxless soldering by combining a blue laser with a wavelength of 445nm, which has a high absorption rate in metals, and a newly developed dispensing mechanism. It allows for the reduction of flux cleaning processes and efficiently delivers heat to the metal parts, thereby minimizing thermal damage to the surrounding joints. Additionally, it is capable of both pulse wave and continuous wave (CW) oscillation, quickly melting the solder within the capillary using pulse waves while suppressing oxidation of the solder. With CW waves, preheating and post-heating can be performed, accommodating a wide range of processes tailored to the target workpiece. 【Features】 ■ Achieves high-quality, damage-free fluxless soldering ■ Allows for the reduction of flux cleaning processes ■ Capable of minimizing thermal damage to the surrounding joints *For more details, please refer to the PDF document or feel free to contact us.

• Soldering Equipment

Amid various keywords such as promoting work style reform as a means of achieving DX, improving productivity, and addressing labor shortages, it has become increasingly difficult to manage items accurately with a limited number of people and resources. The "Asset and Inventory Management System" reads data from RFID tags (IC tags) non-contact, allowing for the simultaneous reading of multiple IC tags compared to visual checks or barcode scanning one by one, thereby improving work efficiency. There is a record of inventory work that took a week with multiple people being reduced to just 3 hours with one person, enabling accurate inventory regardless of the staff's familiarity with item management. We will conduct interviews regarding the materials of assets and items (metal, resin, paper, etc.), usage locations (indoor/outdoor), and intended uses (high temperature, movable objects) to propose RFID tags, reading devices, and systems tailored to your needs. We also conduct demonstrations by attaching RFID tags to items stored at actual sites across the country for verification. We offer samples, rentals, and retail sales. We are flexible in responding to requests for pilot experiments and small starts. We provide support from seven sales bases nationwide, from Hokkaido to Kyushu, so please feel free to consult with us.

• IC tag

The "CB-700 (Athlete FA model)" is an all-in-one FC bonder for R&D purposes. It features an advanced interactive MMIF interface that enhances operability. With high precision (±0.5μm [3σ]) and a wide load range (0.05 to 1000N) as its foundation, it accommodates various applications and broadly meets the needs of R&D. 【Features】 ■ Extremely low load capability and high precision bonding ■ Tool lift operation utilizing high precision Z-axis control ■ Capable of ultrasonic bonding with tool exchange ■ Suitable for process development *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Machine
• Other semiconductor manufacturing equipment

Before purchasing evaluation machines or mass production machines, why not try a coating evaluation with us first? As you take a step towards productization with mass production in mind, various challenges that were previously unnoticed will come to light. To address these challenges, we will listen to your requests and provide various ideas, such as ink improvement proposals and drying method suggestions, while working together with you to establish mass production conditions. 【Features】 ■ Extensive evaluation track record - Coating evaluations aimed at mass production and productization conducted by a manufacturer with a wealth of delivery experience in inkjet devices for displays, semiconductors, electronic devices, and research institutions. ■ Advice for mass production - From the customer's perspective, we provide advice based on all know-how regarding processes, coated substrates, inks, etc., to establish stable productivity and quality for mass production. ■ Suitable print head selection - We select and evaluate suitable print heads from multiple manufacturers based on your coating quality requirements. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other contract services

The "IP1212L" is a fully-fledged compact inkjet coating device designed for mass production, capable of both full and partial coating. All devices in the series can form thin films as well as thick films with a single pass coating. By applying multiple coatings, it can accommodate even thicker film formation. It is a model that can be used in a wide range of fields, compatible with conductive inks, insulating inks, resist inks, UV inks, and more. 【Features】 - Usable with various resist inks, polyimide inks, UV inks, and other functional materials - Coating area up to 120×120mm - High-speed coating possible at up to 500mm/second - Options available for automatic nozzle cleaning and more - Device size: 1400W×1200D×2015H mm *For more details, please refer to the PDF materials or feel free to contact us.

• Painting Machine
• Other surface treatment equipment

This product is an inline-compatible heating furnace that can be integrated into fully automated production lines. It takes substrates and trays from the loader, transports them to the heating stage through sheet processing, and heats them up. It adopts a heating method that utilizes efficient thermal conduction, making it an energy-saving and space-saving heating furnace. 【Features】 ■ Can be integrated into fully automated production lines ■ Inline compatible ■ Adopts a heating method utilizing efficient thermal conduction ■ Excellent energy-saving and space-saving properties *For more details, please refer to the PDF document or feel free to contact us.

• Heating device
• Drying Equipment
• others