List of Contract Services products
- classification：Contract Services
1606～1620 item / All 4771 items
Achieves high collection efficiency through electrostatic methods. Offers a wide range of products from large to small sizes. Also compatible with water-soluble oil mist.
- air conditioning
Simultaneous vibration and temperature control can be synchronized! A test bench that enables high-frequency vibration input for heavy objects.
- Vibration Testing
- Contract measurement
Support for fatigue durability and reliability evaluation tests for industrial products such as automotive parts, agricultural machinery, construction machinery, and factory equipment!
- Strength Testing Equipment
- Contract measurement
Years of product development know-how! We support not only routine testing but also special and highly challenging measurements and evaluations.
- Contract measurement
We will be exhibiting at the "2026 YOKOHAMA International Automobile Technology Exhibition" from May 27 (Wednesday).
We are pleased to announce that our company will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA." We look forward to welcoming everyone to our booth. <Exhibition Content> • ADAS: Next-generation advanced driver assistance systems • Zero G Seat: Innovative seat designed for comfort and safety • Portfolio of software solutions and engineering services • Complete vehicle solutions At the ECS Group, we will showcase engineering services and analysis software in the development areas of commercial vehicles, special vehicles, EV/FCV drive system adaptation, simulation, prototyping, and testing. <Exhibits from ECS> • Engineering services and contract development • Analysis software • Fatigue life prediction analysis software FEMFAT • Mode-based contact analysis software MAMBA • Measurement data processing software FEMFAT LAB • Strength analysis software for printed circuit board assembly (PCBA) FEMFAT MELCOM
The reason why it broke, such as plastic or metal, is left on the fracture surface.
- Contract Analysis
- Contract measurement
- Contract Inspection
If the surface of the gold-plated terminals of connectors, etc., has discolored or has foreign substances attached, there is a possibility that the gold plating is corroded.
- Other contract services
- Contract Analysis
- Contract Inspection
Same-day report at the shortest! The lowest price in the industry! For asbestos analysis, choose Vester!!
- Contract Analysis
This is a list of devices used for analysis, evaluation, and testing services at AITES.
- Contract Analysis
Reverse bias test of power devices (up to 2000V)
At Aites Co., Ltd., high-temperature reverse bias testing (HTRB) for evaluating the oxide film and junction of power devices can be applied up to a maximum of 2000V. By monitoring the leakage current during the test, the degradation status of the device can be grasped in real-time. Since the power supply is independent, if one device fails during the test, it will not affect the other devices. Additionally, it is possible to set a failure criterion (current value) and to cut off the power supply to the device deemed faulty at the time of failure judgment. 【Specifications and Service Details】 ■ Test Voltage: Up to a maximum of DC 2000V ■ Applied Current: Up to a maximum of 14mA ■ Number of Test Devices: Up to a maximum of 8 (independent power supply) ■ Compatible Modules: TO-247, TO-220, etc. (other packages require consultation regarding connection methods) ■ Measurement Content: Monitoring of leakage current ■ Temperature Range: Up to a maximum of 200°C (85°C/85% in high temperature and high humidity conditions)
TEM (Transmission Electron Microscope) meets a wide range of requirements for observing failure sites of electronic components, length measurements, elemental analysis, crystal structure analysis, and...
- Contract Analysis
- Other semiconductors
- Other contract services
Announcement of the introduction of Talos F200E
Our company will introduce the FEI "Talos F200E" transmission electron microscope system. Compared to conventional models, the resolution for TEM and STEM has improved, and performance has been significantly enhanced, allowing for EDS analysis with four detectors. Additionally, it is equipped with features such as drift-corrected frame integration (DCFI), which accumulates multiple frames while correcting for drift.
We provide latch-up testing services to evaluate the resistance of CMOS ICs and semiconductor products containing them to latch-up destruction.
- Contract Inspection
- Other contract services
- Other inspection equipment and devices
Some overseas manufactured parts and products may have quality issues. We provide quality evaluation services for reliability testing and assessment for these.
- Contract Inspection
- Testing Equipment and Devices
- Other inspection equipment and devices
Cryogenic ion milling cross-section processing example (rubber products)
We will introduce a case where cross-sections were created and observed by method regarding the adhesive parts of the tires of pull-back cars. When conducting SEM observations of the created cross-sections, fillers present inside the rubber were confirmed. It was found that the dispersion state of the fillers and the condition of the adhesive interface were not clear with fracture by liquid nitrogen or mechanical polishing. In contrast, the cross-sections created by cryo ion milling allow for clear observation of the dispersion state of the fillers contained within the rubber and the condition of the adhesive interface with the plastic substrate.
Sample 1, including comparison with Ref! Summarize and conduct candidate analytical methods.
- Contract Analysis
Analysis of organic-inorganic composite materials using FT-IR and EDX.
We will introduce an example of analyzing organic-inorganic composite materials using FT-IR and SEM-EDX. FT-IR measurements were conducted on the glossy and non-glossy areas of a PET bottle label, and the IR spectra differed between the glossy and non-glossy areas. Since the non-glossy area resembles the spectrum of acrylic resin, it is considered that the main component is acrylic resin. Additionally, SEM-EDX measurements were performed on both the glossy and non-glossy areas, and EDX spectra and backscattered electron images were obtained, revealing that the non-glossy area contained sulfur (S) and barium (Ba), which were not detected in the glossy area.
We investigated the behavior of strain during moisture absorption and drying using a strain gauge!
- Contract measurement
Strain measurement of power module package resin.
We would like to present the results of strain measurements conducted by attaching strain gauges and thermometers to the surfaces of power modules, both in the mounted state on a circuit board and in the unmounted state. In the mounted module, a slight delay in temperature change was observed, and correspondingly, the change in strain also appeared to be delayed. This is believed to be due to the slower transfer of heat to the module when it is mounted. At Aites, we conduct temperature cycle tests and temperature-humidity cycle tests, during which we can simultaneously measure the strain occurring in the mounted components. Please feel free to consult with us.
By combining the VR-6200 with the heater stage, it becomes possible to visualize changes during heating.
- Contract Inspection
Observation of thermal deformation using a 3D shape measuring machine (VR-6200)
This is a measuring device that can non-contact measure surface shapes such as concavities, undulations, and surface roughness. We will introduce "heating deformation observation" using a 3D shape measuring machine. First, we acquire a 3D texture image at room temperature, and then we acquire a 3D texture image in the heated state. By overlaying the texture images before and after heating and checking the differential texture image and cross-sectional profile, it can be seen that the substrate in the heated state has higher ends and a lower center compared to the room temperature state.
We provide quick and accurate solutions based on technology and experience for quality initiatives that consider performance, reliability, disposal, and recycling from the product planning stage.
- Contract Analysis
- Contract Inspection
- Analytical Equipment and Devices
Evaluation of various implementation substrates
At Aites Co., Ltd., we provide a wide range of technical services for evaluation tests of printed circuit boards (mounted boards) equipped with electronic components. We conduct reliability tests, solder joint observations, whisker observations, and cross-sectional observations. We have IPC-A-610 certified IPC specialists on staff who can assist with observations in accordance with international standards, consultations, and various observation-related concerns. Additionally, we offer services such as X-ray observations, appearance inspections, and shape measurements, so please feel free to consult with us when needed.
In-Situ Continuous Measurement Reliability Evaluation Testing Service
- Contract Inspection
- Testing Equipment and Devices
- Other inspection equipment and devices
Observation of substrate deformation using a 3D shape measuring device (VR-6200)
I would like to introduce "Observation of Substrate Deformation Using a 3D Shape Measuring Machine." By applying pressure to the PCB substrate, referencing bending tests of plastics and PCB substrates, the change in state is measured using a 3D shape measuring machine (VR-6200). Since the measurement results can be confirmed with a color palette and line profile, it is possible to visually verify the shape and amount of deformation caused by the applied pressure.